Renovation of Offices and Residences in Irrigation Colony, Chakia Chandauli

Amount

Dismantling R.C.C. Slab including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60mtr.

Dismantling existing plaster work including disposal of refuse materials as direction by enginner-in-charge within a distance of 60 meter.

Dismantling brick work or stone masonary work with lime or cement including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meter.

Dismantling cement concrete or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meter.

Dismantling old roof tracing including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60meter.

Excavation of foundation in ordinary soil/ sandy loam,clay or sand including lift upto 1.50 meter and lead 30 meter and including filling,watering, ramming of excavated earth into the trenches or upto the space and sides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance upto of 30 meter from the foundation trenches.

P.C.C. 1:4:8 CM in floor base concrete with cement, coarse sand, stone ballast 20 to 40mm size including labour T&P and materials.

Class 150 brick work in 1:4 CM in foundation wall and super structure with cement, coarse sand including labour T&P and materials. With New brick.

Class 150 brick work in 1:4 in foundation wall and super structure with cement, coarse sand including labour T&P and materials. With old brick.

C.C. 1:2:4 40mm thick on slab with cement,coarse sand, stone grit & murga jali including labour T&P and materials.

C.C. 1:2:4 25mm thick on floor with cement, coarse sand, stone grit including labour T&P and materials.

R.C.C. 1:1.5:3 in band with cement,coarse sand &10-20mm size stone grit including labour T&P and materials.

Cutting Bending binding and placing in position of Reinforcement including cost of binding wire,labour T&P and materials.

Sand filling under floor including filling, compaction and other necessary work.

12mm thick Cement Plaster in 1:4 in cement mortar including labour T&P and materials.

Applying one coat of white cement over new surface including rubbing with sand paper with all material T&P etc required for proper completion of the work .

Distempering two coat of oil bound distemper of approved make of Burger, Johnson, Asian, Nerolac over one priming coat of cement primer on new surface after thoroughly brushing the surface with all material T&P etc required for proper completion of the work .

Painting two coat of synthetic enamel paint on new surface superior quality such as luxol high gloss, apcolite, superiac, dulux, including labour T&P and materials .

Finishing walls with water proofing cement Paint of approval make such as super snocem, durrocem, robiecem,guttu cern supercem quality of required shade on new work surface ( two coat) over one coat of white cement primer etc.

Providing & laying 40mm thick kota stone flooring dado,skirting over 10mm thick 1:4 cement mortar jointed with grey cement slurry including cost of all material,Labour T&P.

Sal wood framed and fixed including simple moulding straight work as in chaukhats including labour T&P and materials.

Supply and Fixing of 4cm thick shisham wood part panelled window shutter including supply and fixing of wooden cleats and stopper also including of all necessary fitting T&P.

Supply and Fixing of 3cm thick sal wood part panelled door and window shutter including supply and fixing of wooden cleats and stopper also including of all necessary fitting.

Supply & fixing of flush doors commercial quality conforming to IS. 2202 Part-1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply and including painting with two coats of black japan paint on iron fitting if necessary. with necessary screw complete.Single Leaf 35mm

Fabrication of mild steel/ iron work in gril,gate,railing,door, window frames, including cutting, drilling, welding, and hinges where necessary and fixing in position including cost of all material, labour,T&P etc.

Providing & fixing fly proof stainless steel grade 304 wire gauge to window and clerestory window using wire gauge with average width of aperture 1.4 mm in both direction with wire & 2nd classs teak wood beading 62x19mm size including all work.

Providing and Fixing of 2' x 2' wire mess incuding cutting, drilling, welding, and hinges where necessary and fixing in position including cost of all material, labour,T&P etc.

Making & Fixing local wood jali door shutters 20mm thick including fixing of all fitting material, labour,T&P etc.

Providing & fixing vitrified tiles 600x600mm 9mm thick (light) shade somany/ kajaria/ jonson/orient make on 1:3 cement mortar over 20 mm (Av.)thick base and jointed with white cement (with pigment ) Sullary including cost of all material,Labour T&P.

Providing and laying (white colour ) Kajaria Tiles /Romano tiles flooring over 20 mm (Av.)thick base of cement Mortar 1:4 laid and jointed with white cement (with pigment ) Slurry including cost of all material,Labour T&P

Construction of granular Sub-base by providing well graded material , spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Techincal Specification clause 401

Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Gradeing-3 as per Technical Specification Clause 405

Providing and Laying of Rubber moulded grey colour Interlocking concrete block pavments having thickness 80mm including levelling and dressing of surface to required level and slope over 30mm thk local sand, filling joints with local sand etc

Filling of brick bats in soak pit including all work

Wiring points for light with 1.5 sqmm. FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting, Earth continuity wire and piano type switch etc complete in all respects.complete with 1.5 sqmm. FR PVC insulated multistrand copper conductor cable as earth continuity wire & piano type switch etc complete in all respects.

Wiring point for fan/ fresh air fan (light duty exhaust fan) with 1 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in wall & partly laid in slab along with thereinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick bakelite sheet etc complete in all respect including matching colour wash.

Wiring point for 5 amp Plug with PVC conduit and 1.5 sqmm FR PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit.

Wiring point for call bell with 1 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc, complete in all respect including matching colour wash.

Wiring point for H.P.M.V./Sodium Vapour lamp with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc, complete in all respect including matching colour wash.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 1.75mmx100mmx50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cab in 20 mm dia (2mm thick) PVC conduit with one no. 2.5 sq. mm for PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit.multisrand copper conductor cable as earth wire drawn inside the conduit.

Supply and wiring of submain with two number 6 sq.mm. in FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 25 mm dia heavy duty (2mm thick) PVC conduit with one number 4 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and wiring of submain with two number 10sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick) PVC conduit with one No.6 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and wiring submain 25mm dia heavy duty (2 mm thick) PVC conduit with one number 10 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete all respect.

Supply and fixing of round ceiling fitting suitable for & with 2x9 watt CFL complete in all respect.

Supply and fixing wired decorative mirror light on suitable for 18 watt CFL complete in all respect.

Supply and fixing of factory wired, HPF box type, fluorescent tube light fitting suitable for 1 x 40 watt fluorescent tube complete including tube etc. on surface complete in all respect.

Supply and fixing of door chime on polished MDFEG/Teak ply board including making connections etc complete in all respect.

Supply and fixing of factory fabricated M.S. box in existing sunk of size 600mmx480mmx200 mm deep with godrej type almirah, cover with handle etc fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and D.P./T.P.N. fixing arrangements and provision for compartment for loose wires openable housing on the top and hold fast etc including supply of all material, labour, T&P etc required for proper completion of the work.

Erection and testing of ceiing fan and regulator for room height upto 3.5 meters including supply of 3mm thick G.I.P. pipe 19 mm dia. Duly painted, complete in all respect.

Supply and fixing of 40 Amp 4pole MCB (10KA)

Supply and fixing 16 gauge M.S. drum duly painted including making hole in the wall for exhuast fan and finshing properly complete in all respect.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SW GMS sheet incorporating 10mm dia M.S. round bar duly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T&P etc for proper completion of work.

Construction of recess pf 600 mm x 480 mm size of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all material labour and T&P required for proper completion of the work.

Supply and burying of 600mm x 600mm x 6mm Cooper plate, vertically for earthing with its top atleast 3m Below ground level complte with 20mm G.I. pipe & funnel for watering and two earthing leads of No 8 to10 SWGG.I. wire in 15mm dia G.I. pipe upto switch board (from apron upto switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ cokeand salt at least 150 mm thick alround etc. complete in all respects.

Supply and fixing of one number 8 SWG Copper wire 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, T&P other material required for proper completion of the work as directed at site.

Supply & fixing of electronic fan regulator (Modular) 120-280 V. ISI maked on the existing switch board including making connections, required material, labour T&P etc for proper completion of work to the satisfaction of engineer in charge of work.

Supply and fixing surface/flush mounting 6 ways VTPN disribution board with additional metal without MCB complete in all respect, as directed at site by Engineer in charge.

Supply and fixing of 240 volts 'L' series miniature circuit breaker in existing MCB, DB complete with connections as required.

Supply and fixing of MCCB (16KA) Thernal Magnetic release.

Supply and laying of aluminium conductor, PVC insulated armoured, served, sheeted cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface the cable run shall be fixed on M.S. clamp etc of suitable size as per direction of Engineer-in-charge complete in all respect the armouring of the cable shall be properly connected with the earth conductor by clamp etc 150 Sqm 3-1/2 core.

Supply and fixing of 200 Amp. Four pole change over switch on 50mm x 50mm x 6mm angle iron frame, inlcuding the cost of labour, T&P painting and other material required for proper completion of the work asper direction and satisfaction of Engineer in charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern WC pan of size 580x440mm with integral type foot rests.

Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern with fittings, standard size CP brass flush pipe spreaders with unions and clamps (all in CP brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 mm.

Providing & fixing soil, waste and vent pipes 100 mm dia centrifugally cast iron S & S pipe.

Providing & fixing soil, waste and vent pipes 75mm dia centrifugally cast iron S & S pipe.

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe.

Providing & fixing plain bend of required degree. 75 mm dia Sand cast iron S&S as per IS : 3989.

Providing and fixing terminal guard : 75 mm Sand cast iron S&S as per IS - 3989.

Providing and fixing cost iron coller For 100 mm dia pipe .

Providing and fixing M.S. stays and clamps for sand cast iron /centrifugally cast (spun) iron pipes of diameter 75mm.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors- 100 mm inlet and 75 mm outlet.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets & dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Constructing brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1cement :2coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1cement :4 coarse sand :8 stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3(1cement:3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement :2coarse sand:4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Inside size 90x90 cm and 45 cm deep.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20mm dia nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25 mm dia nominal bore.

Providing & fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm dia nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm dia nominal bore.

Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm length 15mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

Supplying and fixing C.I. cover without frame for manholes : 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm.

M/S GEETA CONSTRUCTION