Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC 112 21 A 2 K N MUKHERJEE ROAD P O TALPUKUR BARRACKPORE 24 PGS N | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹4.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.5 L+₹8,399.50 (1.91%)Rejected-Finance | ₹4.5 L+₹8,399.50 (1.91%) | L2 | Rejected-Finance l2 |
| 3 | L3₹4.6 L+₹15,973.50 (3.63%)Rejected-Finance | ₹4.6 L+₹15,973.50 (3.63%) | L3 | Rejected-Finance l3 |
| Sl No | Description | Qty | Unit | NGM INTERNATIONAL L3 | MIK ENTERPRISES L1 | S T Enterprisr L2 |
|---|---|---|---|---|---|---|
| 1.00Maintenance and overhauling of V.T. / inclined pumps as permanufacturers instruction manual with all tools, tackles etc. This job includes labour charges, consumables like O - ring, sundry cleaningmaterial etc. This job includes dismantling of all sub assemblies such as gear box,cooling pipes,bearing housing,stuffing box,discharge tee,muff coupling,shafts,column pipes,bowl assembly ,bell mouth,strainer,line shaft enclosing tube etc. Reconditioning of all parts,inspection of all parts & replace these parts as per instructions(Spare cost excluded) straighting of shafts & refitting of all parts & sub assemblies with proper alignment including motor removing & re-fixing ,test & trial for 24 hrs. etc complete | ||||||
| 1.01 | a)Capacity above 5 cusec and upto 25 cusec pump | 1 | Nos. | 61,050 ₹61,050 | 60,005 ₹60,005 Lowest | 60,250 ₹60,250 |
| 2.00 | Supply & delivery of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity (make:L&T/ABB/SCHNEIDER): 50 HP ( with Relay of Max Range in Amp 28-42) | 1 | No | 48,425 ₹48,425 | 47,577 ₹47,577 Lowest | 48,250 ₹48,250 |
| 3.00Supply ,delivery & fixing of below mentioned bearing. | ||||||
| 3.01 | i)SKF22216E | 1 | Nos. | 13,000 ₹13,000 | 12,311 ₹12,311 Lowest | 12,509 ₹12,509 |
| 3.02 | ii)SKF 6216 | 2 | Nos. | 4,260 ₹8,520 | 4,099 ₹8,198 Lowest | 4,150 ₹8,300 |
| 4.00 | Supply ,delivery ,fitting & fixing of impeller shaft(EN-19) 1000 mm x 100 mm | 1 | Item | 36,562 ₹36,562 | 36,350 ₹36,350 Lowest | 36,725 ₹36,725 |
| 5.00Supply,delivery & fitting of the following equipments. | ||||||
| 5.01 | i)Impeller | 1 | No | 41,726 ₹41,726 | 40,900 ₹40,900 Lowest | 41,290 ₹41,290 |
| 5.02 | ii)Impeller ring | 1 | No | 7,900 ₹7,900 | 7,725 ₹7,725 Lowest | 8,100 ₹8,100 |
Tender Value
Refer Docs
EMD Value
₹8,823
Closing Date
10 Mar 2025, 1:00 pmClosed
Executive Engineer, GAP-I, EM, KMDA
Office of the Executive Engineer, GAP-I, EM, KMDA, 83 1A Vivekananda Road, 3rd floor, Kolkata-700006
Repairing, servicing with replacement of necessary spare parts of VNC pump set No-1 and other allied electro-mechanical works at Serampore LS-3 and Titagarh Main Pumping Station under KMDA.
2025_KMDA_820585_1
12/EE(E/M)/ GAP-I/ EM /KMDA/T-12(E) of 2024-25 Dt. 19.02.2025
Open Tender
Electrical Work/ Equipment
Item Rate
15 days
Titagarh
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹8,823
Office of the Executive Engineer, GAP-I, EM, KMDA
25 Aug 2026
3 Mar 2025
12 Mar 2025
3 Mar 2025
10 Mar 2025
3 Mar 2025
6 Mar 2025
Amount
Maintenance and overhauling of V.T. / inclined pumps as permanufacturers instruction manual with all tools, tackles etc. This job includes labour charges, consumables like O - ring, sundry cleaningmaterial etc. This job includes dismantling of all sub assemblies such as gear box,cooling pipes,bearing housing,stuffing box,discharge tee,muff coupling,shafts,column pipes,bowl assembly ,bell mouth,strainer,line shaft enclosing tube etc. Reconditioning of all parts,inspection of all parts & replace these parts as per instructions(Spare cost excluded) straighting of shafts & refitting of all parts & sub assemblies with proper alignment including motor removing & re-fixing ,test & trial for 24 hrs. etc complete
a)Capacity above 5 cusec and upto 25 cusec pump
Supply & delivery of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity (make:L&T/ABB/SCHNEIDER): 50 HP ( with Relay of Max Range in Amp 28-42)
Supply ,delivery & fixing of below mentioned bearing.
i)SKF22216E
ii)SKF 6216
Supply ,delivery ,fitting & fixing of impeller shaft(EN-19) 1000 mm x 100 mm
Supply,delivery & fitting of the following equipments.
i)Impeller
ii)Impeller ring
iii) shaft sleeve
iv) Locking bolt for impeller
v)Grub screw for locking bolt
vi) Impeller key
vii)Bush for L.B.H
viii)Thrust Bearing
Supplying, fitting, fixing bolts with nuts, washer:10 to 16 mm dia:
Supply and fixing the C.I Palmer Block of shaft size 62.5 mm dia.(SKF make)
Cleaning of floating materials / garbage / any other foul materials from incoming sewer of drainage pumping station / adjoining penstock gate / open Nikashi / Lock Gate at Canal etc. by mathor labour after removing concrete slab / manhole cover etc. without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc. by using iron pans, buckets including all labour, tools & plants including expulsion of impure / inflammable / asphyxiating gases from the drains etc. and removing the spoils in dry condition and disposing the same by truck beyond the area of Municipal Corporation / municipality / Notified Area Authority / Industrial Township Authority etc. for such disposal including the cost of loading, unloading, transportation and making arrangement of necessary land for disposal, spreading and leveling as necessary etc. and cleaning the road side in all respects, complete as per direction of the Engineer- in-Charge. (Land for disposal to be arranged by the contractor).(Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside) (Length-8m,Breadth-7,Depth-1m)(L-8m * B-7m * D-1m=56 cubic mtr)
M.S. Structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS:226, IS:808 & SP (6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1969 & IS:1995 using electrodes of approved make and brand conforming to IS:814-2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charge such as electricity charges, labour insurance charges etc.
Supply and fixing of smart bright street light (36 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make : Philips, 36 watt
Supply and fixing of smart bright essential street light (70 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sq mm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc Make : Philips, 68 watt
Supply and fixing of philips Smartbrite Xtra 2ft run length LED Batten Tube light, 12 watt incl Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length
Supply and delivery of Cotton Impregnated with lubricant Hydraulic Gland Packing (Style-376), Thickness- 13 to 25mm, Make- Champion
Supply and delivery of Cotton Impregnated with lubricant- Hydraulic Gland Packing (Style-376), Thickness- 12.5mm, Coil Length-3 M, Make- Champion
S T Enterprisr (BID ID -6206704)
NGM INTERNATIONAL (BID ID -6193003)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .