Repair to JE Quarter, RW Sec-1 building at Brahmagiri in the District of Puri for the year 2025-26.

Dismentalling and removing old lime or cement plaster from wall surface including racking out joints 12mm deep and removing the debrise away from the work site including all labour T&P articles . required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

16mm thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curring with cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Dismantlling and removing door, windows and ventilators including removing the frames hings fastering and stacking the same for reuse and refixing them after necessary repair etc. complete as per specifiation and direction of the Engineer-in-Charge.

Providing and fixing marbles / Tiles in dados, skirting and riser of steps on 12mm thick cement mortor (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles inlcuding rubbing and polishing with all cost, conveynace, taxes of marble / tiles labour with T& P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Finishing walls with water proofing cement paint of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.

Distempering two coats to walls with distemper of approved shade on new work to give an even shade including scaffolding staging charges with cost conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification and dirction of the Engineer-in-charge.

Painting two coats with any approved enamel paint to new/old wood work and iron work over a coat of primer including cost of the paint, sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete as per direction of the Engineer-in-Charge.

Supplying, fitting and fixing of M.S. gates, steel windows, M.S. windows grills to windows and openings and collapsible gate with top and bottom rails in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm size with cost and conveyance of all materials, labour taxes and royalities with all T&P etc. complete in all floors including cost of screws and other required materials of approved quality as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of GCI Sheet in roof drilling hole in wind ties including fixing of ridges valleys in position with cost, conveyance, taxes of A.C. sheets but excluding cost of fittings and labour with T & P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Flyash brick masonary in cement mortar (1:6) in superstructure using flyash bricks of 9"/10" size having a crushing strength of not less than 75kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge.

12mm thick cement plaster with cement mortar (1:6) finished smooth to outside brick wall surface after racking out the joints including watering and curring with cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Please Enable Macros to View BoQ information