Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L₹25.6 LAccepted-AOC | L | Accepted-AOC Lowest Bidder | |
| 2 | L2₹26.7 LRejected-AOC FLAT NO 203 GH 5 SECTOR 27 PANCHKULA 134116 HRY | PANCHKULA | HARYANA | 134116 | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹27.3 LRejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
13 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160003
IMPROVEMENT TO VARIOUS BUILDINGS AT AF STN HIGHGROUNDS
2023_MES_610642_2
CWE/AF CHD/CHD/T-07/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per NIT
8 documents required · 8 mandatory
₹500
AGE(I)(AF) Highgrounds
₹86,000
18 Dec 2023
13 Oct 2023
20 Nov 2023
13 Oct 2023
13 Nov 2023
30 Oct 2023
Amount
Dismantling brick tiles or concrete tiles single layer on roof and removal complete all as specified and directed.
M&LCutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and directed.
M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in roof padding to required slope with and incl mixing water proofing compound as per manufacturer's instructions (water proofing liquid shall be paid seperately) complete all as specified and directed.
Taking down existing mud plaster/ tarfelt including roof treatment , bedding on brick or stone surface, roof parapet wall etc including racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed.
Material and labour for providing and laying 3mm thick APP modified polyester reinforced water proofing membrane with minimum weight of 3.60 kg/sqm over bituminous primer as per manufacturer's instructions. The APP membrane shall be laid using torch application with minimum 10 cm side overlap and 15 cm end overlap. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet complete all as specified and directed.
Material and labour, cleaning the new or old pastered or concrete surfaces and applying water proofing treatment on vertical surfaces of roof ( Parapets etc) consisting as under including taking down old unserviceable membrane:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of minimum 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions. (c) Finally finished with a coat of bitumastic aluminium paint over the membrane complete all as specified and directed.
Material & labour, 40 mm thick brick tiles laid on roof with and including 15 mm thick screed bed in CM (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.
All as per item ser No 07 here-in- before but except tiles. Note : Old serviceable tiles retrieved against item No 1 here-in-before shall be reused. The cost of cleaning and washing of brick tiles for re use shall deemed to be included in the unit rate quoted by the tenderer.
M&L for PCC 1:2:4 type B1 using 12.5mm graded stone aggregate as in roof kerb or mud stops mixed with liquid water proofing compound as per manufacturer’s instructions with and including all necessary form work complete all as specified and as directed.
Supply only water liquid proofing compound ISI marked complete all as specified and as directed. Make: Pidiproof WL (Dr Fixit) or equivalent make as specified here-in-after as approved by GE.
Dismantling water tanks of capacity exceeding 250litres but not exceeding 500litres complete all as specified and as directed.
S/FRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and as directed.
S/F in repair Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified and as directed.
S/F in repair 20mm Gun metal,globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc. complete all as specified and as directed
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc. complete all as specified and as directed.
S & F 15mm bore tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, c complete all as specified and as directed.
Re-fixing only steel water tubing of 15 mm bore, with new fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and as directed.
Re-fixing only steel water tubing of 20 mm bore, with new fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and as directed. Note : Old serviceable GI pipes taken down against item Nos 15 & 16 here-in-before shall be reused after cleaning .
S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S& F in repair sink made of stainless steel 1 mm thick for kitchen with plugs washers and waste pipe including bedding in cement mortar or fixing with cantilever brackets and connecting union to pipe over all size 495mm x 420mm, bowl size 410mm x 330 x 160 mm complete all as specified and as directed.
Taking down eaves gutter and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes pressure rating 6kgf/sqcm with single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified and as directed.
S&F in repairs 100mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
Dismantling floor, health or wall tilling including cement mortar bedding (but not backing and rubbish off the primises complete all as specified and as directed.
M&L for 25 mm thick, PCC (1:2:4), type B-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified and as directed.
M&L for non skid ceramic (Premium) coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles complete all as specified and as directed.
M & L for glazed ceramic (digital glossy finish) coloured (Premium) tiles 350x450x8 mm thick, joint free on vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4 complete all as specified and as directed.
M & L for Vitrified ceramic light shade coloured (Premium) tiles, 10 mm thick (square/ rectangular) area of each tiles n. exceeding 0.36 Sq.m laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed in cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. Make : Vitro of Somany or equivalent of make speciified here-in-after.
M & L for Vitrified ceramic light shade coloured (Premium) tiles, 10 mm thick (square/ rectangular) area of each tile n. exceeding 0.36 Sq.m as in skirting, set and jointed in neat cement slurry, over and including 10 mm thick rendering in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles complete all as specified and as directed. Make : Vitro of Somany or equivalent of make speciified here-in-after.
Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed.
M & L for Granite 20 mm thick, table rubbed and polished, fine grained of approved colour/texture in cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust mixed with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4 complete all as specified and as directed.
M&L Machine cut kota stone slab flooring 20-23mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles complete all specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in riser of steps, skirting, dado and pillar laid over cement screed and jointed withover and including 10 mm thick screed bed in cement mortar (1:4) including pointing in white cement mixed with pigment to match the shade of tiles complete all specified and directed.
Demolition of brick masonry in any position built in any mortar complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and fair complete all as specified and as directed. Note: The rate quoted by contractor is deemed to be included for necessary scaffolding as required upto 12m height.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. Note: The rate quoted by contractor is deemed to be included for necessary scaffolding as required
M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as chajjas, balcony,mumty and staircase flight ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor is deemed to be included for necessary scaffolding aas required upto 12.00 Mtr height building.
Reparing to concrete chajja, facias, columns, beams & loft of staicases etc and like by providing PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate including neceesaary formwork or provision of rendering 15 mm thick (avg thickness) in cement mortar (1:3) with chicken wire mesh after applying a coat of cement of slurry @3kg/sqm of surface finished even and fair, surface area not exceeding 600 mm wide in patches including taking down swollen/damaged plaster or concrete upto 12 mtr height complete all as specified and directed by Engr-In-Charge. Note: The rate quoted by contractor is deemed to be included for necessary scaffolding and form work.
Material and labour preparation of new plastered surfaces and apply two coats of water based distmper over 1mm thick wall care putty to smoothening the surface using sand paper complete all as specified and directed.
M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litrs and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of approved shade (Company Depot Tinted) with silicon additives @ 1.43 ltrs/10 Sqm over and including priming coat of exterior primer of the same manufacturer applied @ 0.90 ltrs/10 sqm complete all as specified and directed.
M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.
M&L for complete srcapping old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying two coats of white wash complete all as specified and directed.
M&L for complete scrapping of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty and applying two coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces of walls by wire brushes and applying 1mm thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of water based distemper complete all as specified and directed.
M&L for prepartation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for prepartation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repairs Vitreous China squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm bore cast iron 'P' or 'S' trap and cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. including making good to floor complete all as specified and directed.
S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm bore waste fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 Ltr capacity, low level, white, with inlet,ball valve, float and handle including brackets, low level fluslhing cistern and making connections to pipes complete all as specified and as directed.
S&F in repair Brass chromium plated shower rose 125mm size, with Arm swivel joints, including fixing to steel pipe or union complete all as specified and directed
S&F in repairs towel rail 600 mm long between flanges, 20 mm dia, ‘D’ type, brass chromium plated fixed to walls with screws and plastic cleats complete all as specified and as directed.
Taking down Chowkhats or frame with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed portion in CM 1:4 & finished with similar specification as exists complete all as specified and as directed.
Taking down Chowkhats or frame with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed portion in CM 1:4 & finished with similar specification as exists complete all as specified and as directed.
Supply and fix pressed steel frames of size 125 x 60 mm for door made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock, strick plate etc complete all as specified and as directed.
Supply and fix pressed steel frames of size 105 x 60 mm for door made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock, strick plate complete all as specified and as directed.
Supply and fixed Factory made PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specifications and all as per drawing complete all as specified and as directed.
Supply and fix 40mm thick Flush shutter solid core construction with block board core and plywood face panel commercial type on both sides complete all as specified and as directed.
Supply and fix 35mm thick glazed and skeleton shutters, of 2nd class hardwood, open rebated and prepared to receive glass, gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size fo members of shutter as specified in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30mm thick (Style) consiting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'c' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete all as specified and as directed.
Supply and fix in repair Stop cock cast copper alloy chromium plated fancy type screwed down high presure for iron pipe15mm bore and fixed complete all as specified and as directed.
S&F 2nd class hard wood boarding 25 mm thick planned both sides fixed with nails in shelves, partition and shelves of built in cup board, almirah, book cases , pelmets and similar works complete all as specified and as directed.
M&L precast re-inforced cement concrete type B-0 1:2:4 mix ( 12.5 mm graded aggregate) in door and window frames any size, suingle or double rebated including arrangement for fixing hinges and fixtures complete all as specified and as directed.
Supply and fixing in repairs, drapery rod of stainless steel of 25mm dia, ribbed/fancy type, , any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with stainless steel finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.
Supply and fix door seal 50mm wide and 1 m in length built in aluminium black plate with nylon brush fixed with screws complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix extruded aluminium alloy handles, fabricated type, anodised Of size 150mm complete all as specified and as directed.
Supply and fix floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, fixing in floor (Overall length of cover plate 140mm) complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frame with stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frame with stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fix 3 mm thickness sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed.
Supply and fix 3 mm thickness figured glass, pin head type and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp, insulation etc )or insulation board/slabs/blanket, any thickness including frame and cover fillets complete all as specified and as directed.
M & L false ceiling using 600x600x16 mm thick mineral fibre ceiling tiles seamless of type classic RH-99 fine texture on anodized aluminium snap grid frame work for false ceiling with and including 6 mm dia GI hangers fixed to roof by means of ceiling cleats made out of aluminium flat 40x3 mm size 60mm long and expansion hold fastener (Minimum) 12.50mm long complete all as specified and as directed.
Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) and removal to a distance exceeding 100 metre,complete all as specified and as directed.
Demolition of plain cement concrete of any description and in position or as roof padding and covering concrete with APP membrane/ rendering on parapet wall /roof treatment and in any position not otherwise specifically provided for and removal of debris out of MoD land complete all as specified and as directed
Demolition of cement concrete in ground floors & pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.
M & L for Cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) 75mm thick as in plinth protection, finishing top surface even and fair without using extra cement complete all as specified and as directed.
S&F in repairs bib cock/tap long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed. (Make: Cat No. 8608 of PRAYAG or equivalent make as specfied here- in- after)
S&F in repairs Pillar tap cast copper alloy CP, screwed down high pressure for iron pipe 15 mm bore complete all as specified and as directed.
S&F in repair PVC waste pipe flexible for Sink/ WHB of size 32mm bore complete all as specified and directed .
Taking down shutters of any description n exc 1 sqm each complete all as specified and as directed
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed
Supply and fix Flush shutters 25mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F Continuous (piano) hinges 30mm flaps when open, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
Supply and fix Aluminium handles of size 100mm, cast type, anodised complete all as specified and as directed.
Supply and fix Aluminium, anodised, barrel tower bolts 100mm long of extruded section and fixed complete all as specified and as directed.
Supply and fix Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde-E-165 complete all as specified and as directed.
Supply and fix Hasp and staple of size 100mm, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fix 30mm thick glazed and skeleton shutters, of 2nd class hardwood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkats all as specified and direceted .
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded with and including a shop coat of red oxide primer complete all as specified and as directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded with and including a shop coat of red oxide primer complete all as specified and as directed.
S&F steel ventilators with top hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded with and including a shop coat of red oxide primer complete all as specified and as directed.
M&L for Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
All as per item No 103 here-in-before but except primer.
M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Dismantling plain or corrugated AC Sheets of any thickness on the roof covering complete all as specified and as directed.
S&F Prepainted galvalume aluminium zinc coating GI basedcorrugated steel sheet 0.50 mm thick of an colour to be approved by the Engr-in-Charge having tensile strength of 550 Mpa fixed with self taping screws as in roof covering / cladding to wall complete all as specified and as directed.
S&F rolled mild steel in roof trussess (framed), purlins or ( Beam, TEE, angle) channel or flat sections, including distance pieces, cleats etc. Confirming to Fe 410-W(grade E-250) complete all as specified and as directed.
Dismantling Cast iron or reinforced drain pipes 75/100 mm bore jointed in cement mortar with and including taking out of trenches if required complete all as specified and as directed.
S&F cast iron sand cast soil waste and vent pipes 100 mm bore in any length with or without ears fixed with cement joints laid in floors or in trenches complete all as specified and as directed.
S&F cast iron sand cast soil waste and vent pipes 75 mm bore in any length with or without ears fixed with cement joints laid in floors or in trenches complete all as specified and as directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for laying underground pipes etc complete all as specified and as directed.
Returning, filling in , including spreading , levelling, watering and well ramming in layers not exc 25 cm each in loose / soft soil complete all as specified and as directed.
Removing excavated material n exc. 50 mm and deposited where drirected at a level not exc 1.5 m above the starting point complete all as specified and as directed.
S&F cast iron sand cast soil waste and vent pipes 100 mm bore in any length with or without ears fixed with cement joints fixed to wall complete all as specified and as directed.
S&F cast iron soil waste and vent pipes 75mm bore dia in any length with or without ears with cement joint fixed to wall complete all as specified and as directed.
S&F bends of any radius, diminishing pieces or tappers 100 mm bore with oval acess door complete all as specified and as directed.
S&F bends of any radius, diminishing pieces or tappers 75 mm bore with oval acess door complete all as specified and as directed.
S&F bends of any radius, diminishing pieces or tappers 100 mm bore with duck foot or heal rest complete all as specified and as directed.
S&F bends of any radius, diminishing pieces or tappers 75 mm bore with duck foot or heal rest complete all as specified and as directed.
S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 6 mm dia round iron stay including bolts and nuts and securing end of stays to wall or roof for 100 mm bore of pipe complete all as specified and as directed.
S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 6 mm dia round iron stay including bolts and nuts and securing end of stays to wall or roof for 75 mm bore of pipe complete all as specified and as directed.
S&F in repair cast iron cowl 75 mm bore complete all as specified and as directed.
INTERNAL ELECRIFICATION WORKS
Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings, bell, security lights etc., removing materials from site and making good the disturbed surfaces of walls,ceilings etc.
M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding med grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceiling and incuding provision of 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making good the disturbed surfaces as per existing for for one light/fan point controlled by one switch complete all as per specified and directed.
All as per item No 126 above but for one socket outlet point 5 Amps on same board complete all as specified and as directed.
All as per item No 126 above but for one socket outlet point 5 Amps on independent board complete all as specified and as directed.
All as per item No126 above but with 2.5 sqmm cable for 3 pin 15 amps switch socket outlet (Power point) complete all as specified and as directed.
All as per item No 126 above but for one light point controlled by two 2 - way switches complete all as specified and as directed.
All as per item No 126 above but for one bell point controlled by one bell push complete all as specified and as directed.
Supply and fix switch piano 6 Amps flush type single pole one way 230 volt , AC supply complete all as specified and as directed.
Supply and fix switch piano 16 Amps flush type single pole one way 230 volt , AC supply complete all as specified and as directed.
Supply and fix socket outlet 3 pin 6 amps 230 volt AC flush type complete all as specified and as directed.
Supply and fix socket outlet 2 in 1, 3 pin 6/16 amps 230 volt. flush type complete all as specified and as directed.
Supply and fix bell push 5 Amps flush type single pole one way 230 volt , AC supply complete all as specified and as directed.
Supply and fixing in replacement door bell electric , ding dong type, single phase 230 volts, complete all as specified and as directed.
Supply and fix ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, 220 V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing fan regulator electronic step type (socket type), 250 volts, AC supply suitable for ceilling fan of any type/make/sweep complete all as specified and as directed.
Supply and fix lamp holder PVC /polycarbonate type with back plate complete all as specified and as directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed..
Supply and fix exhaust fan steel body complete with louvers shutter, voltage 230V, 50 Hz, single phase, Min. 1200 RPM, Copper winding of sweep 300m connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, incl making hole in wall and make good as existing incl dismantling and taking down old unsv complete all as specified and directed. Note: Old unsv exhaust fan shall be deposited in MES Store Yard.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
Supply and fix RCBOs for earth leakage, overload and short circuit protection double pole 30 mA current rating 25/32 Amps 230 volts, 50Hz , breaking capacity complete all as specified and as directed.
Supply and fix MCB TPN/FP 415 volts, 50Hz , breaking capacity 10KA, B curve 40A to 100 A, ISI marked complete all as specified and as directed.
Supply and fix MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked complete all as specified and as directed.
Supply and fix MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 32 A, ISI marked complete all as specified and as directed.
Supply and fix sheet metal enclosures distribution board TPN 4, ways double door , IP 43 protection, 415 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface complete all as specified and as directed.
Supply and fix sheet metal enclosures distribution board SPN 8 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable for MCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface complete all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by GI pipe 15mm bore (light grade) and 20mm bore (light grade) GI watering pipe, etc all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers, 20 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate. Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.
Material and labour for sub main wiring with two single core PVC insulated , unsheathed stranded copper conductor cable FRLSH 6 sqmm drawing in concealed conduit not less than 25 mm dia with acessories and making good the disturbed surface incl one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm, green colour for earth continuity conductor incl taking down of unsv sub main wiring complete all as specified and as directed. Note : 2 runs of power cable +1 run of earth continuty wire and 1 run of conduit shall be measured as 1 unit/meter.
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 25.0 sq mm 4.0 core incl thimbles/lugs and connection complete all as per specified and directed. Note: Earth work and HDPE pipe shall be measured and paid separately under relevent items.
M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.
M&L locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protection prependicular to the direction of cable adjacent to each other complete all as specified and directed.
Supply and fix switch piano 16 Amps flush type single pole 2 way 230 volt , AC supply complete all as specified and as directed.
Supply & fixing or laying in replacement HDPE (DWC) pipe of outer dia not less 50 mm fixing on poles, walls, under floors, road, drain crossing, laying on surface etc as reqd at site with and including accessories as per site requirement complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over one coat of primer complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit of Rs. 59,759.00 for old Materials as per Schedule of Credit.
B N FRIENDS AND CO
N.N.CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .