Shifting or Rerouting of Existing 66KV Naghedi - Satrasta H frame (DOG) SC OH Line between Loc No: 14 to 15 under deposit work by Jamnagar Municipal corporation under (option-I) for Selling of F.P. No.67 in T.P.S. No.-2 (JMC) , F.P. No. 67, near amusement park at Jamnagar and Pole Strengthening work of Location No.14 Naghedi-Sat - Rasta line under AM Division Jamnagar under Jamnagar Circle

TENDER NO.: TCJ/26-27/78

Name of work :- Shifting / Rerouting of Existing 66KV Naghedi - Satrasta 'H' frame (DOG) S/C OH

Line between Loc No: 14 to 15 under deposit work by Jamnagar Municipale corporation under

(option-I) for Selling of F.P. No.- 67 in T.P.S. No.-2 (JMC) , F.P. No. 67, near amusement park at

Jamnagar." and Pole Strenghening work of Location No.14 Naghedi-Sat - Rasta line under AM

Division Jamnagar under Jamnagar Circle

SN Description Unit Rate Amount

1 Excavation for foundation up to 1.50 m Depth

including sorting out and stacking of useful materials &

Refilling the sides of the trenches and disposing off Cmt 117.00 159.00

surplus excavated stuff up to any lead -Dense or Hard

2 Manual Excavation for foundation from 1.50 m to

3.0m depth including sorting out and stacking of useful

materials & Refilling the sides of the trenches and

disposing of the excavated stuff up to any lead - For all

type of strata i.e. Loose Soil, Dense Soil, Hard Murrum,

Soft Rock, Hard Rock

3 Rolling, consolidation and levelling of soil including

filling in depression which occur during the process, with Cmt 230.00 23.00

appropriate roler as directed by Engineer in charge.

4 Demolition of brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (ii) In

5 Demolition of R.C.C. work including stacking of

serviceable materials and disposal of unserviceable Cmt 5.00 1097.00

materials with all lead and lift.

6 Providing White stone Bella masonry (incl.quion

blocks, jamb blocks, closer etc;) approved size in

foundation and up to plinth in C.M. (1:6) including

racking out joints up to 12mm depth, scaffolding, curing,

filling up the gaps between the joints complete as

directed by E.G.. Up to PLINTH.

7 Providing and laying cement concrete 1:4:8 (1 Cement

: 4 Coarse sand : 8 black crushed stone aggregate

40mm nominal size ) and curing complete- Foundation

8 Providing 20mm thick cement plaster in single coat on

or half brick walls for interior plastering upto floor two

level Smt 7.00 232.00

and finished even and smooth in (i) Cement mortar 1:3

9 Providing & laying control cement concrete M-20 as per

mix design exposed work with curing etc. complete

excluding the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse -For Footing base

of col.,foundation & mass concrete

10 Providing & laying control cement concrete M-20 as per

mix design exposed work with curing etc. complete

including the cost of ply wood form work & adjustable Cmt 6.00 6935.00

tubular steel supports / Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse - For Vertical Wall

11 Providing & laying control cement concrete M-25 as

per mix design exposed work with curing etc. complete

excluding the cost of ply wood form work & adjustable Cmt 1.00 15153.00

tubular steel supports / Props. but excluding the cost of

reinforcement.G.F+FF & Staircasse - For Footing.

12 Providing & laying control cement concrete M-25 as

per mix design exposed work with curing etc.

completeexcluding the cost of ply wood form work &

adjustable tubular steel supports / Props. and the cost

of reinforcement.G.F+FF & Staircasse -For Vertical

13 Supply, Installation and fixing in position of Fuji

silvetrech or its equivalent make Precast RCC Cable

trench having minimum in to in size of 1300 mm wide

at top and 1150mm at bottom and 1000 mm depth

thickness of wall 90 mm at top and 145mm at bottom

and top lid. RCC cable trench & cover provided as per

drawing, manufactured with self compacted concrete,

rate included, jointing with GP2 or it's equivelent griuting

mortar, drilling hole when as required for cable passing

with core cuttuer with top PSC cover, RCC cable trench,

Fixing as per instruction of engineer in charge.

Precast trench large size out to out dim. (1480 x 1305)

(FT-Flumes) for Cable trench. Size (width and depth) of

sections as above. The product should be meeting BIS

requirements. The product shall be duly steam cured in

the plant to have requisite compressive strength. The

product shall be made by using advanced precast

technology using high performance self-compacting

concrete of M50 grade and Fe 500 D grade TMT steel

reinforcement bar. The product shall have tie shape

groove of 12-18 mm width and 16 mm depth on both

sides of each precast unit product for jointing two

precast units. The product shall be designed to take

T wheel loading on top and 25 T uniformly distributed

loading on its side wall. The product should have flange

coupling jointing arrangements, one each at bottom and

both the side walls, at appropriate location for shear

connection between two products. Provision of weep

hole or drainage hole (similar to drainage hole of earth

retaining wall) should be made in the product for

avoiding buoyancy and releasing the surcharge and

lateral earth pressure in case of intensively heavy rain

fall. The product shall have in built insert at optimized

locations for mechanical installation activities including

supply and transportation at site. The precast product

shall be manufactured in controlled environment

adhering to stringent pre-defined, atmospheric

Providing Thermo Mechanically treated bars (TMT

bars) confirmed to IS 1786 FE 500/500D for RCC work

including bending, binding and placing in position etc.

completed for RCC work.

Providing and fabricating and erecting GI angle posts,

racks & trays, covers for cable trench using structural

steel angels, sheets and flats etc. of approved steel

manufacturer as per drawing & design including cutting,

15 welding & fixing hold fast in wall with C.C. & one coat Kg 1255.00 106.00

of red oxide primer & two coats of oil paint of approved

shade & make etc. completed as directed by EIC.(All

materials required for the work to be brought by the

Providing and fixing approved make perforated C type

cable tray. Made from Pre-galvanized steel sheet. size

450 x 50X 1.5mm with clamping arrangment etc. The

cable tray should be bended as per is 2062/1079. with

max 17.5% perforated with coupler plate / fish plate and

GI hardware like nut-bolt and washer etc. erected on

existing support as per specification and as per

instruction and as per directed by EIC.

Providing form work of ply wood shuttering so as to

give a smooth exposed finish including centering

(adjustable tubular steel supports). Shuttering strutting

17 and propping etc. for any height of propping and Smt 20.00 281.00

centering below supporting floor to ceiling , and removal

of the same for reinforced concrete and plain concrete.

for Footings , foundations and pedestal

Providing and applying of anticorrosive treatment to

exposed thoroughly cleaned structural reinforcement

and steel section by applying GEOLITE or equivalent

chemical powder from 8mm to 40mm thickness by hand

using trowel or a mortar spray machine. Removal of

loose concrete, races of shoots, grease oil etc. from

beams column, chajjas, projection, lintel etc using

impact high frequency hammer/chiesels, using

compressed air without damaging the existing concrete.

The application shall be done by wire brush or spray /

sand blasting after cleaning existing reinforcement with

wire/rotary to make the surface free from loose

materials, dirt etc incusive of all labor material,

equipment etc complete as per instruction of EIC.

Extra rate for using polyester fiber (12mm) with

equivalent cross section with specific gravity 1.35 to

a secondary reinforcement) in concrete of any grade at

rate of 125 gms per 50 kg of Cement consumption.

Providing & Fixing of Dowel bar of Min. 12mm Dia rate

including Drilling of hole, proper cleaning fixing of Dowel

bar with epoxy chemicle, labour, scaffolding, machiner

tools & tekals etc. as per Directed by EIC

RsTotal Rs Total Cost of Civil Works in Rs.

Welfare Cess 1.00%

IN WORDS RUPEES THIRTY TWO LACS THIRTEEN THOUSAND SIX HUNDRED EIGHTY RUPEES AND TWELVE

Welfare Cess will be paid as per rules and reimbursed on production of proof of such payments made by the

contractor to the appropriate department.

NOTE: (1) Please note that change in commercial terms & conditions in (a) clause –A3” Instruction

to Bidders” and (b) Caluse-3 and clause 6 of (section-c) General conditions of contract i.e.

(Compensation for the delay) and (Action on default by contractor) (C) Clause-37 of section-D

general condition of contract i.e. (Rights of Owner), Clause-43 (Relationship with employee) and

clause-44 (Conflict of Interest among Bidder/Agents)

GETCO: Circle Office, Jamnagar.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by

GETCO on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We

am/are willing to carry out the work at _________________% (in words ______________percentage)

above/below the estimated cost. Accordingly the total amount of my/our tender works out to

above/below the estimated cost. Accordingly the total amount of my/our tender works out to

SIGNATURE OF CONTRACTOR.

(With rubber stamp/seal of the company)