Furniture Work

Providing and Supplying Furniture Residential Additional Collector Quarters. Dist-Navsari

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Providing and fixing modular kitchen drawers/trolleys 4.60 Sqmt 12513.90

made of stainless steel grade IS 304, of required sizes

and configurations for thali, dishes, cutlery, perforated

baskets, partitions and cups, complete. The SS baskets

shall be of sizes ranging from 4 inches to 18 inches, as

specified and as per functional requirements. The trolley

shall be installed on the kitchen platform and shall have

drawer front and back panels made from 19 mm thick ISI-

marked waterproof plywood, laminated on all exposed

sides with approved laminate finish. The item includes

supply and fixing of all necessary SS fittings, handles,

knobs, telescopic channels, fasteners and accessories,

complete in all respects. The work shall be executed

strictly as per approved drawings, images, specifications

and instructions of the Architect and Engineer-in-Charge,

including proper alignment, smooth operation and

2 Providing and fixing 25 mm thick block board shutters 3.80 Sqmt 4949.00

including hardwood frame of size 25 mm × 50 mm,

complete as directed. Shutters shall be finished with

mm thick laminate on the outer visible face and 0.80 mm

thick laminate on the inner face, fixed using 6" SS hinges,

8" approved handles, magnetic catch, stoppers and all

necessary hardware. The work shall include application

of Fevicol or equivalent adhesive, teak wood beading,

and all required fixtures. The shutter shall be finished

with one coat of primer and two coats of oil paint or

polishing, as directed. All plywood, block board and

hardware shall be ISI-marked and approved by the

Engineer-in-Charge, inclusive of material, labour, tools

and complete installation.

Item Description of Item Quantity Unit Rate In Amount

3 Providing, fabricating and installing custom-made 17.90 Sqmt 16665.00

bedroom wardrobe as per approved drawings and

elevation, comprising full height wardrobe up to lintel

level (2100 mm) with all openable shutters equally

spaced, constructed using 19 mm thick BWP (all-proof)

plywood for carcass, partitions and internal shelves,

mounted on teakwood framing complete. Front shutters

shall be 25 mm thick, finished with 1.0 mm thick

laminate on all visible/external faces and 0.8 mm thick

laminate on internal faces, including 30 cm long handles

as approved, and 5 mm groove detail at bottom of

shutters. Internal wardrobe shall have 19 mm plywood

shelves at equal vertical spacing of 0.40 m, with internal

shelf depth of 0.55 m. Providing one side drawer unit of

height 0.80 m with smooth sliding drawer and bottom

storage with openable shutter, including all necessary

hardware, hinges, drawer channels, fittings, alignment,

fixing, leveling and finishing complete in all respects, as

per Architect/Engineer-in-Charge instructions and

approved sample, inclusive of material, labour, tools and

4 Providing and fixing 25 mm thick polished Kota stone 47.90 Sqmt 667.61

shelf of required size, with full round edge profile and

double-side polishing, including cutting, finishing, and

fixing in position using cement slurry and approved

adhesive. All exposed edges shall be neatly cut and

smoothly finished. The work shall be executed as

directed by the Engineer-in-Charge, complete in all

respects including materials, labour, and tools.

5 Constructing Platform of 18 mm thick Polished Black 1.50 Sqmt 6235.74

Granite at top and 25 mm thick Kota stone slab one side

polished at bottom with cementing Materials / adhsives

including makeing necessary grooves in walls with

Vertical sandwich two Kotastone 25 mm support every

60 cm centre to centre or as required including all labour

material of approved quality incl. full moulded round

front edge granite strip of one side polished and jointed

with grey cement slurry including rubbing and polishing

etc. complete for all floors

Item Description of Item Quantity Unit Rate In Amount

6 Providing and supplying wall-mounted TV unit of overall 3.00 No 6868.00

size 1650 mm (L) x 300 mm (D) x 200 mm (H) at

mm above finished floor level (FFL), fabricated from ISI

standard 19 mm thick plywood (M1). The unit shall

include 2 drawers (each 450 mm wide) fitted with

telescopic roller channels , handles , and all required

stainless steel or zinc-coated hardware The central

portion shall remain open (750 mm wide) for media

All visible surfaces shall be finished with 1 mm thick

decorative laminate and wall-facing/internal surfaces

with 0.8 mm thick laminate liner . All exposed edges shall

be finished with 6 mm thick teakwood beading, polished

with matt finish melamine polish . Remaining non-visible

surfaces and internal edges shall be coated with enamel

(oil) paint in a matching shade.The complete unit shall

be fabricated, polished, and installed with necessary

anchoring, complete as per approved design, sample, and

instructions of the Architect and Engineer-in-Charge.

7 VENEER PANELLING: 14.00 Sqmt 4506.62

Providing & fixing 12mm thick BWR Grade plywood

fixed on frame work finish with 4mm thick Veneer

polish. The frame work shall be made from square

hollow aluminum anodized section size of 50x50x1.5 mm

& 25x50x1.5 mm of approved make conforming to IS

code. The framework shall be fixed as per drawing

vertically @ 600 mm c/c & horizontal 600 mm c/c

horizontally. All ply/wooden shall be treated with anti-

termite treatment .Rates shall also be inclusive of cost of

making CNC/engraving /cut outs/ openings for electrical

fixtures, tube lights /air-conditioners ,grills, diffusers etc

& providing additional sections for strengthening around

the openings/cutouts additional support for fixing of

patch fittings for doors, making grooves between wall &

board, in filled with termite treated wooden members if

required or as per drawing /instruction of EIC. and no

extra payment shall be considered for additional sections

provided. All curved surfaces, recesses, waffles shall be

part of the paneling including Openable shutter

wherever required area and finished with the same

material. Work complete including all type of material,

fittings , fixtures, Finish, loading , unloading

transportation, all leads ,accessories, groove, adhesive

,tape, headless nails, sample mockup, all floor , all levels,

all heights etc complete as per detailed drawings

,specifications & instruction of Client/EIC.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures

and words) of the estimated rate mentioned above. Amount of my /our

Item Description of Item Quantity Unit Rate In Amount

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

4 where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt. mentioned in all the

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari