Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.5 LAccepted-Finance | ₹2.5 L | 1 | Accepted-Finance L1 |
| 2 | 2₹2.5 L+₹4,108.80 (1.67%)Rejected-Finance | ₹2.5 L+₹4,108.80 (1.67%) | 2 | Rejected-Finance L2 |
| 3 | 3₹2.5 L+₹8,747.60 (3.57%)Rejected-Finance | ₹2.5 L+₹8,747.60 (3.57%) | 3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | thakur lalit L3 | M/S Krishan Electrical L2 | Metro Suppliers and Construction Company L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing of Mono Submersible pumping set of KSB make Model KRTK 80251 comprising to latest relvent BIS: code. The pump should be fitted with bronze impeller of suitable alloys as per BIS:8034-1976 latest suitable for clear cold water having greased packed bearing shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric including motor( Water proof type) suitable for operation on 440 volts three phase 50 CPS Total Head:-30.00 mtr Discharge:- 1.40 LPS 1 Set of 1.50 HP | 1 | P/Set | 36,000 ₹36,000 | 35,500 ₹35,500 | 35,000 ₹35,000 Lowest |
| 2.00 | Providing and fixing Single phase panel board of BS/L&T make with Amp meter, volt meter, over load relay, kit kat, indicator set MCCB etc. complete in all respect and to the entire satisfaction of Engineer-In-Charge | 1 | Each | 13,200 ₹13,200 | 13,200 ₹13,200 | 13,000 ₹13,000 Lowest |
| 3.00 | Providing and fixing submersible cable 2.5mm² submersible cable of L&T/Havells make | 50 | Rmt | 330 ₹16,500 | 310 ₹15,500 Lowest | 320 ₹16,000 |
| 4.00 | Providing and fixing rope with 6mm² dia situable to wear the weight of submersible motor pumps set and GI pipe etc. including in all leads and lifts. | 30 | Rmt | 110 ₹3,300 | 120 ₹3,600 | 105 ₹3,150 Lowest |
| 5.00 | Excavation in foundations, trenches etc., in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each depositrd layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect as per entire satisfaction of Engineer in Charge. | 62.33 | Cum | 490 ₹30,541.7 | 485 ₹30,230.05 | 480 ₹29,918.4 Lowest |
| 6.00P/L GMS Tubes in trenches i/c testing complete in all respect (Earth work in trenches to be measured & paid for separately) | ||||||
| 6.01 | GI pipe 25mm dia(L.C.) | 280 | Rmt | 520 ₹1,45,600 | 510 ₹1,42,800 | 500 ₹1,40,000 Lowest |
| 7.00 | P/F horizontal nipple connected for submersible pump and PVC riser pipes in all leads and lifts. | 1 | Each | 860 ₹860 | 820 ₹820 | 800 ₹800 Lowest |
| 8.00 | Providing, manufaturing and fixing of Mono Block stand of MS angle 40x40x5mm thick including carraige all lead and lift and to the entire satisfection of Engineer-In-Charge | 21.43 | Kg | 190 ₹4,071.7 | 185 ₹3,964.55 | 180 ₹3,857.4 Lowest |
| 9.00 | Providing and fixing of Ball valve 25mm dia of superior quality as per satisfection of Engineer In charge | 1 | Each | 1,120 ₹1,120 | 1,120 ₹1,120 | 1,100 ₹1,100 Lowest |
Tender Value
₹1.6 L
EMD Value
₹3,270
Closing Date
16 Jun 2026, 11:00 amClosed
Eecutive Engineer
Jal Shakti Division Bilaspur
Restoration of rain damages of LWSS New Bilaspur Town in Tehsil Sadar district Bilaspur(H.P) (SH P/F Mono submersible pump with all allied accessories at Spring source near BDO Block Lakhanpur under PDNA))
2026_HPIPH_135835_5
BLP-BLP-0736-NIT No. 2672-2771 Dated 04/06/2026
Open Tender
Civil Works
Item Wise
30 days
Sub Division Bilaspur Section NBT
Please refer Tender documents.
4 documents required · 4 mandatory
₹350
₹3,270
2 Jul 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of Mono Submersible pumping set of KSB make Model KRTK 80251 comprising to latest relvent BIS: code. The pump should be fitted with bronze impeller of suitable alloys as per BIS:8034-1976 latest suitable for clear cold water having greased packed bearing shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric including motor( Water proof type) suitable for operation on 440 volts three phase 50 CPS Total Head:-30.00 mtr Discharge:- 1.40 LPS 1 Set of 1.50 HP | 1 | P/Set | - | - |
| 2 | Providing and fixing Single phase panel board of BS/L&T make with Amp meter, volt meter, over load relay, kit kat, indicator set MCCB etc. complete in all respect and to the entire satisfaction of Engineer-In-Charge | 1 | Each | - | - |
| 3 | Providing and fixing submersible cable 2.5mm² submersible cable of L&T/Havells make | 50 | Rmt | - | - |
| 4 | Providing and fixing rope with 6mm² dia situable to wear the weight of submersible motor pumps set and GI pipe etc. including in all leads and lifts. | 30 | Rmt | - | - |
| 5 | Excavation in foundations, trenches etc., in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each depositrd layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect as per entire satisfaction of Engineer in Charge. | 62.33 | Cum | - | - |
| 6P/L GMS Tubes in trenches i/c testing complete in all respect (Earth work in trenches to be measured & paid for separately) | |||||
| 6.01 | GI pipe 25mm dia(L.C.) | 280 | Rmt | - | - |
| 7 | P/F horizontal nipple connected for submersible pump and PVC riser pipes in all leads and lifts. | 1 | Each | - | - |
| 8 | Providing, manufaturing and fixing of Mono Block stand of MS angle 40x40x5mm thick including carraige all lead and lift and to the entire satisfection of Engineer-In-Charge | 21.43 | Kg | - | - |
| 9 | Providing and fixing of Ball valve 25mm dia of superior quality as per satisfection of Engineer In charge | 1 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
PWD6.pdf
Tender Documents • 0.40 MB
PWD8.pdf
Tender Documents • 1.32 MB
Termsandconditions.pdf
Tender Documents • 0.17 MB
BOQ_201134.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .