JJM Kalluvathukkal-JJM crossing of clear water gravity main and distribution line at Kalluvathukkal Junction

Amount

CROSSING OF CWGM FROM WTP TO 11.3LL OHSR

OD204195/2022-2023:Supply and installation of HDPE -500 mm dia PE 100 (PN 8) -IS -14333 pipe by horizontal directional drilling method and drawing 315mm HDPE carrier pipe through 500mm HDPE upto required length ,in all types of soil above /below water table up to 10 m depth for pumping /gravity /distribution main including preparing and setting up the plant and equipment, installing new pipe work, testing and commissioning including cost of pipe (6 m line pipe with butt joint ) all related civil /mechanical works like entry /exits pit as necessary. Dewatering ,drilling stringing, reaming, pulling back the new pipe on the designed alignment and monitoring by approved guidance system. wastage of pipes, proper disposal of drilling fluid /bentonite slurry. Proper back filling of pit and holes by approved borrow material as per specification approved method statement or as directed by engineer in charge.

OD203209/2022-2023:Interconnection of Newly laid 315mm HDPE with existing 250 mm DI K9 pipeline with required specials including cost of all labour , materials etc as per direction of department officers

OD203210/2022-2023: Constructing valve chamber of inner size 1.50 m x 1.50 m x 1.250 m in M-20 grade cement concrete for reinforced cement concrete work with 12mm and 10 mm MS rod, side wall 15mm with 8mm MS rods and cover slab 20mm thick of 3nos of size 1.80 m x 0.65 m x 0.2 m over a PCC base of size 1.80 m x 1.80 m x 0.15 m in in cm 1:3:6 using 20 mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6 mm thick including cost and conveyance of all materials etc. complete, as per the direction of deptl. officers

100.31.1.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class I.

100.98.474:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 250mm.

100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.98.168:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 500mm Outer Dia.

CROSSING OF DISTRIBUTION LINE FROM 11.3 LL OHSR AT KALLUVATHUKKAL JUNCTION

OD204196/2022-2023:Supply and installation of HDPE -500 mm dia PE 100 (PN 8) -IS -14333 pipe by horizontal directional drilling method in all types of soil above /below water table up to 10 m depth for pumping /gravity /distribution main including preparing and setting up the plant and equipment, installing new pipe work, testing and commissioning including cost of pipe (6 m line pipe with butt joint ) all related civil /mechanical works like entry /exits pit as necessary. Dewatering ,drilling stringing, reaming, pulling back the new pipe on the designed alignment and monitoring by approved guidance system. wastage of pipes, proper disposal of drilling fluid /bentonite slurry. Proper back filling of pit and holes by approved borrow material as per specification approved method statement or as directed by engineer in charge.

OD203206/2022-2023:interconnection of Newly laid 315mm HDPE with existing 250 mm DI K9 pipeline with required specials including cost of all labour , materials etc as per direction of department officers

OD203207/2022-2023: Constructing valve chamber of inner size 1.50 m x 1.50 m x 1.250 m in M-20 grade cement concrete for reinforced cement concrete work with 12mm and 10 mm MS rod, side wall 15mm with 8mm MS rods and cover slab 20mm thick of 3nos of size 1.80 m x 0.65 m x 0.2 m over a PCC base of size 1.80 m x 1.80 m x 0.15 m in in cm 1:3:6 using 20 mm broken stone, plastering inside the valve chamber and cover slab in CM 1:3, 6 mm thick including cost and conveyance of all materials etc. complete, as per the direction of deptl. officers

100.31.1.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class I.

100.98.474:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 250mm.

100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.98.168:Supply of HDPE Pipe PE 100 (IS 4984/1995), 10kg, 500mm Outer Dia.

Muhammed safvan MK

Mpower Constructions

Bidder Name

Mpower Constructions

Muhammed safvan MK

SMACO ASSOCIATES PVT LTD