Repairs and upkeep TP and FD Furniture of RMA, Signal Unit officers and Sailor Institutes, Auditorium and Shore Established inside Dock under GE NB, Visakhapatnam

Amount

Notes:- The rates quoted for repairs and replacement of following furniture components shall be inclusive of the following:- (a) Dismantling of unserviceable components carefully without disturbing the adjoining parts and replacing the same with new components as per the size and shape of such components as shown/ mentioned in the respective furniture drawings. (b) All wooden joints shall be fixed with bamboo pins, wooden screws, wedging, gluing, fevicol and wooden putty wherever required on completion of repair of the . (c) The replaced wooden items shall be finished with two coats of spray application of PU polish/ French polish to match with existing finish of furniture including necessary preparation of surfaces. (d) The replaced steel items shall be finished with two coats of spray painting using synthetic enamel paint to match with existing finish of furniture including necessary preparation of surfaces. (e) Work shall be executed at Furniture yard of GE [NB] Visakhapatnam and onsite at Users locations such as Dolphin Hill, Restricted area of Signal Units at Circar/DHC, ENCSI, NOI, Shore Establishment/ Units inside dock all as directed.

Chair dining [Trade Pattern] Model Galaxy of Godrej

S & F First class rubber wood [Grade 'A'] Rear leg made out of Size 50 x 50 x 900 mm with bottom size 45 X 45 mm and top end size 18 x 20 mm, chamfered at 25 degree at bottom & upper portion (Bow shape) outward from side view complete all as specified and as directed.

S & F First class rubber wood [Grade 'A'] front leg made of size 430 x 35 x 35 mm

S & F First class rubber wood [Grade 'A'] Seat rail of size 360 x 20 x 20 mm

S & F First class rubber wood [Grade 'A'] back rest support frames 60 x 30 x 10 mm

S & F First class rubber wood [Grade 'A'] Back rest top frame 70 x 20 x 410 mm made in curve shape

S & F Back rest lower frame of rubber wood [Grade 'A'] 35 x 20 x 330 mm made in curve shape

Provision of Seat cushion 410 x 400 mm size made with cool foam 50 mm thick 40 density including provision of cover with approved tapestry joined bottom on 10 mm BWR ply covered with cotton cloth duly screwed from base complete all as specified and as directed.

S & F L-shape metallic strip with star screw at joining seat rail /leg frame to strength stability

Sofa set 3 seater[Trade Pattern] Model Urban denim of Godrej

S & F upholstery of heavy linen mat finish tapestry approved shade and texture for 3 seater back of size 2040 x 400 x 180 mm, seat cover of size 1700 x 600 x 220 mm, Arm rest cover of size 800 x 700 x 130 mm and base leg rest of size 1650 x 600 x 120 mm

S & F moulded PU foam size 800 x 700 x 130 mm of density 45 covered with Recron fibre and lining cloth at Arm rest

S & F moulded PU foam size 1650 x 600 x 120 mm of density 45 with recron fibre and lining cloth at base leg rest

S & F moulded PU foam size 1700 x 600 x 220 mm of density 45 covered with recron fibre and lining cloth for 3 seater seat base

S & F moulded PU foam size 2040 x 400 x 180 mm of density 45 with recron fibre and lining cloth for 3 seater back rest

S & F Dymetrol stretchable fabric (100 S) in lieu of worn out covered inside base

S & F TW wooden bottom base 1500 x 75 x 25 mm

Tighten the loosen First class rubber wood [Grade 'A'] legs with long screws/washers and polish the same

Tighten the loosen base metal frame (1650 x 50 x 25 - 02 No and 520 x 50 x 25 - 02 No ) underneath the sofa with new Nut /bolt and washers after removing old rusted/broken one

Sofa single seater[Trade Pattern] Model Urban denim of Godrej

S & F upholstery of heavy linen mat finish tapestry approved shade and texture for single seater back rest cover size 930x 400 x 200 mm, base seat cover of size 600 x 500 x 150 mm, Arm rest cover of size 800 x 600 x 150 mm and base leg rest of size 600 x 550 x 150 mm

S & F moulded PU foam size 800 x 600 x 150 mm of density 45 covered with recron fibre and lining cloth at Arm rest

S & F moulded PU foam size 600 x 550 x 150 of density 45 covered with recron fibre and lining fibre at base leg rest

S & F moulded PU foam size 600 x 550 x 150 mm of density 45 covered with recron fibre and lining cloth for seat base rest

S & F moulded PU foam size 930 x 400 x 200 mm of density 45 covered with recron fibre and lining cloth for 3 seat back rest

S & F TW wooden bottom base 380 x 75 x 25 mm

S & F Dymetrol stretchable fabric (100 S) in lieu of worn out fabric covered inside base

M & L for tightening the loose First class rubber wood [Grade 'A'] legs with new Long Screws/washers and duly polished

M & L for tightening the loose base metal frame (500 x 50 x 25 - 04 Nos ) underneath the sofa with new nickel Nut / bolt and washers

Sofa two seater[Trade Pattern] Leatherite Model Carbo of Godrej

S & F Seat cushion 1000 x 1100 x 150 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

S & F Back cushion 1100 x 1100 x 120 mm size made with cool foam 42 density covered with markin cloth duly screwed from back

S & F arm rest cushion 500 x 160 x 160 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

S & F of Side surface cushion 720 x 500 x 180 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

S & F upholstery of soft leatherite cover for two seater of seat size 1100 x 1000 x 150, back size 1100 x 1100 x 120, side surface 720 x 500 x 180 and Arm cover 500 x 160 x 160 duly stitched and fixed over the cool foam

M & L for tightening loose bottom legs with existing screws/washers and duly polish

M & L for tightening the loose bottom legs with existing screws/washers and duly polished

Table reading[Trade Pattern] Model T-125 of Godrej

M & L for Spray painting the existing MS pipe legs 100 mm dia of length 700 mm with Syn enamel black colour

M & L for Spray painting the existing MS frame (long/short rails) underneath the table top with Syn enamel black colour

S & F 25 mm thick Prelaminated MDF exterior grade top of size 1800 x 900 mm with Walnut shade with all exposed edges are edge banded with 0.8 thick PVC edge curve banding

S & F 25 mm thick Prelaminated MDF exterior grade top of size 1500 x 900 mm with Walnut shade with all exposed edges are edge banded with 0.8 thick PVC edge curve banding

S & F hard rubber bush 100 mm dia for MS pipe leg

Table dining for 4 persons[Trade Pattern] Model Omega of Godrej

S & F First class rubber wood [Grade 'A'] Leg size 35x35 at bottom and size 70x70 at top of length 760 mm

S & F First class rubber wood [Grade 'A'] long rail of size 65x25x1100 mm

S & F First class rubber wood [Grade 'A'] short rail of size 65x25x800 mm

S & F First class rubber wood [Grade 'A'] inner bracket 20x20x120 for joining Rails and legs underneath Table top with bolt/nut as in TP drg

S & F 25 mm thick Prelaminated MDF exterior grade top of size 1250 x 900 mm of required shade with all exposed edges are edge banded with 0.8 thick PVC edge curve banding

S & F hard rubber bush for leg

Chair Writing Model Target Plus of Godrej

S & F First class rubber wood [Grade 'A'] front Leg size 40x20x430 mm (curve shaped at edges as in TP drg)

S & F First class rubber wood [Grade 'A'] rear Leg size 40x20x805 mm (curved shape at corner as in TP Drg)

S & F First class rubber wood [Grade 'A'] back rest made of size 400x40x20 mm

S & F First class rubber wood [Grade 'A'] middle stiffener size 20 dia of 350 mm length

S & F First class rubber wood [Grade 'A'] side stiffener size 20x20x 350 mm

Provision of Seat cushion 400 x 400 mm size made with cool foam 50 mm thick 32 density covered with approved tapestry cloth (Mat finish fabric meter not less than Rs 450 pm meter) joined over bottom base 10 mm BWR ply covered with cotton cloth duly screwed from base

S & F L-shape metallic strip with star screw at joining seat rail /leg frame to strength stability

Table Study-cum-workstation[Trade Pattern] Model Target plus of Godrej

S & F First class rubber wood [Grade 'A'] key board size 400 x 600 of 20 thick

S & F First class rubber wood [Grade 'A'] Table top size 1120 x 500 of 20 mm thick

S & F MS Power coated soft channel for key board channel of 18" length

S & F First class rubber wood [Grade 'A'] leg top size 40 x 40 mm of 740 mm length

S & F First class rubber wood [Grade 'A'] base rest size 370 x 250 x 20 mm

S & F First class rubber wood [Grade 'A'] base leg short stiffener size 400 x 25 x 45 mm thick

S & F First class rubber wood [Grade 'A'] base leg short stiffener size 980 x 25 x 45 mm thick

Table centre 2 tier[Trade Pattern] Model Alice of Godrej

S & F First class rubber wood [Grade 'A'] side legs size 400 x 70 x 70 mm

S & F First class rubber side stiffener size 400 x 40 x 60 mm

S & F First class rubber wood [Grade 'A'] bottom base size 180 x 750 x 25 mm

S & F 2 tier glass size 200 x 750 x 5 mm adjoining bottom base

S & F hard rubber bushes for legs with screw

Bed Hard Single[Trade Pattern] Model Adriana of Godrej

S & F bottom plinth of 25 mm thick Prelaminated PLB exterior grade BSL (white shade) of size 920 x 100 mm fixed to existing MS frame inside the bed

S & F long rail made of 18 mm thick Prelaminated PLB exterior grade BSL (Walnut cherry shade) of size 2000 x 160 mm covered with Prelaminated HDF Folio wrapped decorative trims (size 80 x 20 mm) with matching shade of existing one and fix to existing MS frame inside the bed complete all as specified and as directed.

S & F Head board made of 18 mm thick Prelaminated PLB exterior grade BSL ( Walnut cherry shade) of size 1130 x 945 mm covered with Prelaminated HDF Folio wrapped decorative trims (Size 100 X 40 mm) with shade of existing one and fix to existing MS frame inside the bed complete all as specified and as directed.

S & F Tail board made of 18 mm thick Prelaminated PLB exterior grade BSL (Walnut cherry shade) of size 1070 x 500 mm covered with Prelaminated HDF Folio wrapped decorative trims (size 100 x 40 mm) with shade of existing one and fix to existing MS frame inside the bed complete all as specified and as directed.

S & F Bed top panel 18 mm thick Prelaminated PLB exterior grade size 2000 x 920 with all exposed edges are edge banded with 0.8 thick PVC edge banding complete all as specified and as directed.

Bed Hard Double bed [Trade Pattern] Model Adriana of Godrej

S & F bottom short plinth of 25 mm thick Prelaminated PLB exterior grade BSL (white Shade) of size 1530 x 100 mm fixed to existing MS frame inside the bed

S & F bottom middle long plinth of 25 mm thick Prelaminated PLB exterior grade BSL (white Shade) of size 2020 x 100 mm fixed to existing MS frame inside the bed

S & F Square MS pipe 25 x 25 made to U shape (60 x 30) with 200 mm high duly painted with one coat of Zinc oxide and two coat of Black paint and connect the same with middle long stiffener and the ground base of bed underneath

S & F Long rail made of 18 mm thick Prelaminated PLB exterior grade BSL (walnut cherry shade) of size 2020 x 160 mm covered with HDF folio wrapped decorative trims (size 80 x 20 mm) with matching shade of existing one and fix to existing MS frame inside the bed

S & F Head Board made of 18 mm thick Prelaminated PLB exterior grade BSL (Walnut cherry shade) of size 1650 x 900 mm covered with HDF folio wrapped decorative trims (size 100 x 40 mm) to match with existing one and fix to existing MS frame inside the bed

S & F Foot Board made of 18 mm Prelaminated PLB exterior grade BSL (Walnut cherry shade) of size 1550 x 500 mm covered with HDF folio wrapped decorative trims (size 100 x 40 mm ) to match with existing one and fix to existing MS frame inside the bed

S & F Bed top panel 18 mm thick Prelaminated PLB exterior grade size 2000 x 920 with all exposed edges are edge banded with 0.8 thick PVC edge banding

Table dressing Model [Trade Pattern] Adriana of Godrej

S & F for SS fancy type drawer handle 160 mm

S & F Mirror size 1160 x 330 mm of 5 mm thick with curve shape at top as shown in the TP Drg

S & F MS square pipe 25 x 25 x 1655 duly black powder coated fixed to back ply frame of mirror

S & F Mirror back panel made of 20 mm thick Prelaminated PLB exterior grade (Walnut cherry shade) size 1220 x 440 mm with all exposed edges are edge banded with 0.8 thick PVC edge banding and fix to existing MS frame pipe

S & F base box of 25 mm thick Prelaminated PLB exterior grade (walnut cherry shade) of size 460 x 440 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F base support of 25 mm thick Prelaminated PLB exterior grade (Walnut cherry shade) of size 380 x 360 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F base leg of 25 mm thick Prelaminated PLB exterior grade (Walnut Cherry shade) of size 380 x 100 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F MS Power coated soft channel 12 " length for existing drawer

Dressing stool [Trade Pattern] Model Adriana of Godrej

S & F side panel of 20 mm thick Prelaminated PLB exterior grade (Walnut cherry shade) size 400 x 380 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F back panel of 20 mm thick Prelaminated PLB exterior grade (Walnut cherry shade) of size 380 x 280 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F top panel of 20 mm thick PLB board exterior grade (Walnut cherry shade) size 300 x 100 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F back leg frame made of HFD folio wrapped decorative tim size 400 x 60 x 30 mm (shade to match with existing one) duly fixed to existing side / back panel

S & F Cool foam of size 360 x 330 x 60 of 32 density covered with approved shade tapestry

S & F hard rubber bushes for legs/panel with screw

Table bedside [Trade Pattern] Model Adriana of Godrej

S & F side panel of 20 mm thick PLB board exterior grade (Walnut cherry shade) size 480 x 380 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F back panel of 20 mm thick PLB exterior grade (Walnut Cherry shade) of size 400 x 380 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F top panel of 20 mm thick PLB board exterior grade (Walnut cherry shade) size 450 x 440 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F rear leg frame made of HFD folio wrapped decorative tim size 480 x 70 x 30 mm (shade to match with existing one) duly fixed to existing side / top panel

S & F base support panel of 20 mm thick PLB board exterior grade (Walnut Cherry shade) size 370 x 90 mm with all exposed edges banded with 0.8 thick PVC edge banding

S & F for SS fancy type drawer handle 160 mm

S & F MS Power coated soft channel 12 " length for existing drawer

Sofa single seater [Trade Pattern] Model Midas of Godrej

S & F Seat cushion 550 x 550 x 75 mm size made with PU foam 42 density covered with markin cloth duly screwed from base

S & F Back cushion 550 x 550 x 75 mm size made with PU foam 42 density covered with markin cloth duly screwed from back

S & F soft velvet upholstery of approved shade (metre not less than 650 per metre) for seat and back complete duly stitched and fixed over the cool foam

M & L for clean existing SS frames with buffer machine to removing dirt/stains

Sofa cum bed [Trade Pattern] Model Brussel of Godrej

S & F soft velvet upholstery of approved shade (metre not less than 650 per metre) for item of size 1870 x 1210 mm complete duly stitched and fixed over the cool foam

Sofa 2 seater [Trade Pattern] Model PISA of Godrej

S & F upholstery of soft leatherite cover completely for two seater seat size 1270 x 770 x 780 mm duly stitched and fixed over existing the cool foam

Sofa single Model PISA of Godrej

S & F upholstery of soft leatherite cover completely for single seater seat size 650 x 770 x 780 mm duly stitched and fixed over existing the cool foam

Table Office Clerk Steel, FD-84[M]

Table top Size 1200 x 610 mm for Table clerk steel 18mm thick MDF (OST) Exterior grade and provide 4mm thick teakwood beading alround the top including polishing.

Table top size 1680 x 870 mm for Table office officer steel of MDF (OST) Exterior grade 18mm thick and provide 4mm thick teakwood beading alround the top including polishing.

M & L for removing u/s Drawer of tables office clk steel / typist steel and S & F new drawer made of 1 MM thick as size shown in drg (460 l X 325 W X 120 H in mm) duly painted with red oxide and 2 coat of OG /Smoke grey paint with spray machine

M & L for removing u/s Drawer and S & F new one made with 1 mm thick as per size shown in drg (500 L x 325 W x 120 H mm ) for Table office officer steel duly painted with red oxide and 2 coat of OG / smoke grey paint with spray machine

M & L for removing rusted frames from leg base of tables and S & F 25 Sq mm MS pipe 16 Gauge thick as per standard drgs duly welded and painted with Zinc oxide and 2 coat of OG paint

S & F for hard rubber shoes to bottom of steel table's legs in shape as square 25mm.

Locks 4 lever (size 45 x 40 mm) with flat type SS key in duplicate Make : Godrej/Harrison/Bharat/Link for steel tables office clk steel/ officer steel /office typist steel/table 900x600x760mm.

Replace worn-out PVC Recessed handles (150 x 50 x 20 mm) for drawers of steel tables with new one

Joining the worn out / broken joints of table frames in length of 1 cm with Gas welding to stabilise the structure of the item

STEEL ALMIRAH LARGE / MEDIUM [FD-351/350]

M& L to removing old unserviceable locks from Almirahs S & F new 6 lever lock (Size 75 x 50 mm) with duplicate Flat key (2 Nos of key) Make Godrej/Harrison/Link/Bharat of existing size fixed with screw/ spot weld to shutter of almirahs complete all as specified and as directed.

M& L to removing old unserviceable inside box cover of Almirah and S & F new Box cover of size 250 x 120 mm of 1 MM thick MS sheet fixed with screw to shutter of almirahs complete all as specified and as directed.

M& L for Removing old unserviceable 3-way Assembly from Almirahs and supply and fix new assembly including 6mm thick bars round with necessary fittings of approved quality complete all as specified and as directed.

M& L for Removing old unserviceable broken handles from Almirahs and supply and fix new Godrej pattern handle 120 mm length with necessary fittings of approved quality complete all as specified and as directed.

M& L for Removing old unserviceable broken bush between 3 way lock device from Almirahs and supply and fix new brass bush complete all as specified and as directed.

M& L for Removing the unserviceable/rusted bottom sheet from Almirah large steel and supply and fix new bottom made out of 1mm thick MS sheet made to shape and size (950 X 450 MM) as on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M& L for Removing the existing unserviceable legs from Almirah small/medium steel and supply and fixing the new legs made out of 1.5 mm thick MS sheet size 440 (L) x 100 (H) x 80 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide complete all as specified and as directed.

M& L for Removing the existing unserviceable legs from Almirah large steel and supply and fixing the new legs made out of 1.5 mm thick MS sheet size 480 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide complete all as specified and as directed.

M& L for Removing old broken hinges of Almirahs steel and S & F new MS hinges or U clips 70 / 75 mm long duly welded complete all as specified and as directed.

M& L for Removing the unserviceable shelves from Almirahs steel & supply and fix new shelves made out of 1mm thick MS sheet made to shape and size ( 440 W x 800 L ) on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed.

M& L for Removing bented doors shutter (1850 x 465 mm) of Almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed.

M& L for Removing the existing dented shelves (450 x 940 mm) from Almirah large steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

BOOK CASE STEEL [FD 90]

M & L for removing of u/ser Al / CP handles and S & F new SS handles of 100 mm long fixed with screws

M & L for removing of broken/faded glass sheet and S & F new plain glass size 230 x 740 mm of 3 mm thick duly fixed to existing MS frame

M & L for removing of u/ser channel and S & F new MS channel made to shade of 1 mm thick made to shape as guide rail to inside glass Door frame duly painted

M & L for removing of u/ser Iron clit stopper and S & F new stopper of size 20 x 10 mm made to shape duly painted

M & L for removing of u/ser lock and S & F new lock 4 lever with flat type SS key in duplicate Make : Godrej/Harrison/Bharat/Link for door compartments

M & L for removing of u/ser bottom frame sheet and S & F new MS sheet cover of 1 mm as per shape and size (120 H X 760 L in MM) thick duly welded and painted with one coat of Zinc oxide and two coat of existing shade to match with item complete all as specified and as directed.

LOCKER STEEL (Single DSC / Sailor )[SD-6210/FD-113]

M & L for removing of u/ser Al handles and S & F new CP handles of 100 mm long fixed with screws

M & L for removing of u/ser Hasp/staple and S & F new Hasp & staple 75x40 of 3 mm thick

M & L for removing of u/ser conduit pipe and S & F new conduit pipe of 20 mm dia of length 380 mm

M & L for removing of u/ser socket and S & F new socket fixed to inner sheet as shown in drg to support conduit pipe

M& L for Removing the existing unserviceable legs and S & F the new legs made out of 1.5 mm thick MS sheet size 600 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide complete all as specified and as directed..

M& L for Removing old broken hinges of Almirahs steel and S & F new MS hinges or U clips 70 / 75 mm long duly welded and complete all as specified and as directed.

M& L for Removing dented door / shutter (size 1020 x 380 mm) bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed.

Chair push back Mid Back TP Godrej Model Glamour

S & F 3 layer foam laminated fabric for seat rest 1.5 mtr wide 2 ft of required shade Ruby red / Azure blue

S & F 3 layer foam laminated fabric for back rest 2.25 mtr wide 2 ft of required shade Ruby red / Azure blue

S & F High resilience PU Seat foam size 520 x 425 x 100 mm of 48 density

S & F High resilience PU Back foam size 700 x 450 x 100 mm of 48 density

M & L Spray paint to MS base frame with existing matching colour

M & L for clean existing PU arm rest with buffer machine to removing dirt/stains

S & F Standard mechanical bolts Model FU275IIX069SXTRD

Chair Auditorium MB TP Godrej Model Audi III

S & F 3 layer foam laminated fabric for seat rest 1.25 mtr wide 2 ft of required shade Ruby red / Azure blue

S & F 3 layer foam laminated fabric for back rest 1.5 mtr wide 2 ft of required shade Ruby red / Azure blue

S & F Hi resilience PU seat foam size 450 x 490 x 75 mm of 48 density

S & F Hi resilience PU back foam size 450 x 520 mm X 75 mm of 48 density

M & L Spray paint to MS vertical legs with existing matching colour

S & F Arm rest PP as per sample

S & F Chemical bolts Model FU21221069SXCHM

Chair Halo VHB / VB PCH 9200/9201 R & Halo MB PCH 9202 R or Halo Visitor PCH 9202 R

Back rest HR PU foam moulded size 530 x 954 mm of 4 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Halo 9200 / 9201 R

Seat rest HR foam moulded size 546 x 490 mm of 4 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for 9200 / 9201 R

Back rest HR PU foam moulded size 530 x 700 mm of 4 inch thick 45 density with 12 mm hot pressed ply wood and cover made of soft leather duly stitched and fixed over for MB PCH 9202R or Visitor PCH 92121 V

Seat rest HR PU foam moulded size 546 x 490 mm of 4 inch with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for MB PCH 9202 R or visitor PCH 92121 V

Leather cover duly stitched and fixed to existing of Halo HB / MB / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

PU foam 50 mm with Soft leather cover for arm rest of PCH 9200 /9201 / 9202 R

Pedestal base made of Die-cast Aluminium buff finish for PCH 9200 / 9201 / 9202 R

KTS mechanism for 5 position locking lever for PCH 9200 / 9201 / 9202 R

Hydraulic rod heavy duty for height adjustment for PCH 9200 / 9201 / 9202 R

Twin wheel castor 50 - 60 dia heavy duty for PCH 9200 / 9201 / 9202 R

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Spray paint to understructure of Halo visitor PCH 9202 R with Silver metallic grey

Chair HB Monarch PCH 9N01 A / Supreme HB or Chair MB Monarch PCH 9N02 A / Supreme or Chair visitor Monarch PCH 9N12 R / Supreme

Back rest HR PU foam moulded size 530 x 960 mm of 3 inch thick with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over

Seat rest PU HR foam moulded size 530 x 490 mm of 3 inch thick with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over

Back HR PU foam moulded size 530 x 675 mm of 3 inch thick with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for MB PCH 9N12 R / Supreme

Seat rest HR foam moulded size 530 x 490 mm of 3 inch thick with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for MB PCH 9N12 R / Supreme

Leather cover duly stitched and fixed to existing of Monarch / Supreme HB / MB / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

Adjustable PU arm of Armrest having handle height/depth 60 mm + /- 5 mm for Monarch model

Spring button/ cap for Arm rest movement

Buffing the existing Arm rest Die-cast SS chrome handles for Supreme model with machine to clean dirt marks and tightening the loosen handles

Pedestal base made of Die-cast SS buff finish for PCH 9N01 A

KTS mechanism for 5 position locking lever for PCH 9N01 A

Hydraulic rod heavy duty for height adjustment for PCH 9N01 A

Twin wheel castor 50-60 dia heavy duty for PCH 9N01 A

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Buffing the existing understructure of Monarch / Supreme visitor with machine to clean dirt marks

Chair Kareena HB PCH 9P01A / MB PCH 9P02 A / Conference PCH 9P02-T / Visitor PCH 9P12-T

Back rest HR PU foam moulded size 480 x 760 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Kareena HB PCH 9P01A

Seat rest HR foam moulded size 510 X 480 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Kareena HB PCH 9P01 A or MB PCH 9P02 A

Back rest HR PU foam moulded size 480 x 645 mm of 3 inch thick 45 density with 12 mm hot pressed ply wood and cover made of soft leather duly stitched and fixed over for MB PCH 9202R or Visitor PCH 9P12-T or conference PCH 9P02-T

Seat rest HR foam moulded size 510 x 480 mm of 3 inch with 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for MB PCH 9202R or Visitor PCH 9P02-T or conference PCH 9P02-T

Leather cover duly stitched and fixed to existing of Kareena HB / MB / Conference / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Kareena model

Spring button/ cap for Arm rest movement

Pedestal base made of Die-cast Al Chrome buff finish for Kareena model

KTS mechanism for 4 position locking lever for Kareena model

Hydraulic rod heavy duty for height adjustment for Kareena model

Twin wheel castor 50-60 dia heavy duty for Kareena model

Buffing the existing understructure of Kareena visitor with machine to clean dirt marks

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Chair Bravo HB PCH 9U01R / MB PCH 9U02 R / Visitor PCH 9U12 R

Back rest HR PU foam moulded size 475 X 695 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of fabric upholstery (voilet shade) duly stitched and fixed over for Bravo HB PCH 9U01 R

Back rest HR PU foam moulded size 475 X 580 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of fabric upholstery (voilet shade) duly stitched and fixed over for Bravo MB 9U02 R / Visitor PCH 9U12 R

Seat rest HR PU foam moulded size 470 X 480 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Bravo HB PCH 9U01R / MB PCH 9U02 R / Visitor PCH PU12 R

Acrylic fabric upholstery cover duly stitched and fixed to existing of Bravo HB / MB / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

Fixed PU loop arm as per shape made of black co-polymer polypropylene

Pedestal base assembly made of black Polypropylene

Center tilt Syncro mechanism locking lever for bravo model

Hydraulic rod for pneumatic height adjustment for Bravo model

Twin wheel castor 50-60 dia heavy duty for bravo model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Spray paint the existing understructure of Bravo visitor with black syn enamel paint

Chair MB Model motion ( for Workstation) Godrej

Back rest HR PU foam moulded size 455 X 530 mm of 3 inch thick 48 density with 12 mm hot pressed plywood and cover made of high stretch knitted polyester fabric upholstery (voilet shade) duly stitched and fixed over for Motion MB

Seat rest HR PU foam moulded size 455 X 480 mm of 3 inch thick 48 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Motion MB

high stretched knitted polyester fabric cover duly stitched and fixed to existing of Motion MB seat or back base without disturbing the existing serviceable HR PU foam chairs

Fixed arm as per shape made of black Integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide

Pedestal base assembly made of black Polypropylene

Center tilt Syncro mechanism locking lever for Motion model

Hydraulic rod for pneumatic height adjustment for Motion model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Twin wheel castor 50 - 60 dia for motion model

Chair mesh fabric model ACE or Leoma HB / MB or visitor

Back rest size 465 x 600 mm made of Polyester mesh fabric net upholstery of high tenacity yarn fixed to existing back cover frames

Seat rest HR PU foam moulded size 510 x 490 mm of 3 inch thick 45 density fixed to existing seat frames covered with Polyester fabric

Polyester acrylic fabric cover (black / red colour) duly stitched and fixed to existing of ACE / Leoma seat base without disturbing the existing serviceable HR PU foam chairs

Neck rest PU foam covered with Polyester fabric(black colour) for ACE /Leoma Full back chair

Die cast polished Aluminium Back spine support

Adjustable PU cover arm rest made of Plastic inner height / depth 6.0 +/- 0.5 cm

Spring button/ cap for Arm rest movement

5 position tilt limiter locking lever

Hydraulic rod heavy duty for height adjustment for ACE / leoma

Twin wheel castor 50 - 60 dia for ACE / Leoma model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Spray paint the existing understructure of ACE/Leoma visitor with Silver metallic grey enamel paint

Chair Rev Model Tycoon HF-366-1 MB Make Featherlite

Back rest HR PU foam moulded size 475 X 690 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Tycoon HF 366-1 MB

Seat rest HR PU foam moulded size 475 X 480 mm of 3 inch thick 42 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Tycoon HF-366 MB

Soft leather cover duly stitched and fixed to existing of Tycoon seat or back base without disturbing the existing serviceable HR PU foam chairs

PU foam 50 mm with Soft leather cover for arm rest of tycoon model

Pedestal base assembly made of black Polypropylene

Center tilt Syncro mechanism locking lever for tycoon model

Hydraulic rod for pneumatic height adjustment for Tycoon model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Twin wheel castor 50-60 dia for bravo model

Chair Marvel PCH FU 3301 / 3302 HB / MB / Visitor Godrej

Back rest HR PU foam moulded size 477 x 764 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Kareena HB

Back rest HR PU foam moulded size 477 x 601 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of soft leather duly stitched and fixed over for Marvel MB / Visitor type

seat rest HR PU foam moulded size 470 x 480 mm of 3 inch thick 45 density with 12 mm hot pressed ply wood and cover made of soft leather duly stitched and fixed over for Marvel MB / Visitor / HB Type

Leather cover duly stitched and fixed to existing of Marvel HB / MB / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

Adjustable PU arm of Armrest having handle height/depth 65 mm + /- 5 mm for Marvel

Spring button/ cap for Arm rest movement

Pedestal base made of Die-cast Al Chrome buff finish for Marvel model

KTS mechanism for 5 position locking lever for Kareena model

Hydraulic rod heavy duty for height adjustment for marvel model

Twin wheel castor 50-60 dia for marvel model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Buffing the existing understructure of marvel visitor with machine to clean dirt marks with buffer machine

Chair fabric Regency HB / MB / Visitor with or with out arms PCH 7001 D / PCH 7002 D / PCH 7003 D / PCH 7004 D

Back rest HR PU foam moulded size 500 x 720 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of fabric upholstery (blue shade) duly stitched and fixed over for Regency HB

Back rest HR PU foam moulded size 500 X 490 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of fabric upholstery (blue shade) duly stitched and fixed over for Regency MB PCH 7002 D / Visitor PCH 7003 D / PCH 7004 D

Seat rest HR PU foam moulded size 500 X 465 mm of 3 inch thick 45 density with 12 mm hot pressed plywood and cover made of fabric upholstery(blue shade) duly stitched and fixed over for Regency HB / MB / Visitor

Acrylic fabric upholstery cover duly stitched and fixed to existing of Regency HB / MB / Visitor seat or back base without disturbing the existing serviceable HR PU foam chairs

Fixed PU loop arm as per shape made of black co-polymer polypropylene

Pedestal base assembly made of black Polypropylene

Center tilt Syncro mechanism locking lever for regency model

Hydraulic rod for pneumatic height adjustment for regency model

Twin wheel castor 50 - 60 dia for bravo model

M & L for refixing the worn out chrome Slege base with new nickel Bolts

Spray paint the existing MS ERW tube understructure of Regency visitor with black syn enamel paint

Table conference Senate 20 / 30 / 10 Pers Godrej

S & F 25 mm thick Prelaminated MDF exterior grade top single seater of size 760 X 600 mm with Beech/Sycamore/Cherry shade with all exposed edges are edge banded with 0.8 thick PVC Waterfall edge banding

S & F 25 mm thick Prelaminated MDF exterior grade top two seater of size 1370 X 600 mm with Beech/Sycamore/Cherry shade with all exposed edges are edge banded with 0.8 thick PVC Waterfall edge banding

S & F 25 mm thick Prelaminated MDF exterior grade top two seater curve corner R71.3 with Beech/Sycamore/Cherry shade with all exposed edges are edge banded with 0.8 thick PVC Waterfall edge banding

S & F 25 mm thick Prelaminated MDF exterior grade top one seater curve corner R71.3 with Beech/Sycamore/Cherry shade with all exposed edges are edge banded with 0.8 thick PVC Waterfall edge banding

S & F hard PVC bushes to bottom vertical panels to existing Table top

Chair PPCP Model Ornate or Model Pearl Make Supreme

S & F Seat rest PU foam moulded size 560 x 490 mm of 2 inch thick 40 density duly covered with soft fabric upholstery (blue / red shade) duly stitched and fixed over for Ornate model

S & F Back rest PU foam moulded size 290 x 425 mm of 2 inch thick 40 density duly covered with soft fabric upholstery (blue / red shade) duly stitched and fixed over for Ornate model

S & F Seat rest PU foam moulded round shape 300 mm of 2 inch thick 40 density duly covered with soft fabric upholstery (blue / red shade) duly stitched and fixed over for pearl model

S & F Back rest PU foam moulded size 260 x 425 mm of 2 inch thick 40 density duly covered with soft fabric upholstery (blue / red shade) duly stitched and fixed over for Pearl model

M & L for removing stain/dirt on PPCP and apply wax liquid and rub over all frames for glossy finish

Chair steel with/with arms cushioned Model CHR 8 / CHR 73 Make Godrej

Worn out 20 mm MS Sq pipe at leg/frame to weld with spot gas welding to retain stability and apply red oxidde at jointed area

M & L for apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

S & F u/s Hand rest with TW size 50x20x255 duly lacquer polished

removing u/s worn out / faded cushion seat/back and S & F new Seat/back with cushion covered fitted on 12 mm Ply and cover with black colour leatherite duly fixed with screws to existing frames of chair for model CHR 8 / CHR 73

PVC hard shoe cap, duly removing worn out one

Chair steel with out arms Model CHR 18 / CHR 14 Make Godrej

Worn out 20 mm MS Sq pipe at leg/frame to weld with spot gas welding to retain stability and apply red oxide at jointed area

M & L for apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

removing u/s worn out cane from seat/back and cane with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning for MODEL CH-18 / CHR 14

PVC hard shoe cap, duly removing worn out one

Chair steel with arms Model CHR 7 / CHR 6 Make Godrej

Worn out 20 mm MS Sq pipe at leg/frame to weld with spot gas welding to retain stability and apply red oxide at jointed area

M & L for apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

S & F u/s Hand rest with TW size 50x20x255 duly lacquer polished

removing u/s worn out cane from seat/back and cane with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning for MODEL CHR 7 / CHR 6

PVC hard shoe cap, duly removing worn out one

Table Office Desk steel Model Enterprise RH / LH with Pedestal unit Make Godrej

S & F 25 mm thick Prelaminated MDF exterior grade top Panel size 1500 x 900 mm with Colour shade LM 94 Saim teak+brown/ LM 93 Palau teak + White shade with all exposed edges are edge banded with 0.8 thick PVC curve edge banding

S & F locks 4 lever godrej model for pedestal

M & L for apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frame including pedestal steel box of enterprises model

Table computer Make Godrej Model Buddy / Companion

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 900 x 590 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 800 X 430 mm with Colour Beech / Saim Teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C1

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 1230 x 610 mm (oval shape at one end) with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 1200 x 600 mm with Colour Beech / Saim Teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C2

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 810 x 810 mm with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C4

S & F 18 mm thick Prelaminated MDF exterior grade top Panel size 1100 x 500 mm with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C8

S & F PPCP Key board tray for model Buddy Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Mouse pad size 300 x 250 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej

M & L for apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frame including front Metallic cover sheet model Buddy

S & F 18 mm thick Prelaminated MDF exterior grade Key Board panel size 780 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C1 Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Key Board panel size 675 X 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3 Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Scanner board panel size 300 X 550 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3 Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Key Board panel size 750 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C2 Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Key Board panel size 780 x 350 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C4 Godrej

S & F 18 mm thick Prelaminated MDF exterior grade Key Board panel size 600 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C8 Godrej

S & F SS 75 / 100 mm handles for drawer / shutter of model Companion C2 / C8

S & F powder coated (Ivory shade) soft MS channels of 15 inch (set of two) for Key board of model Companion C1 / C2 / C3 / C4 / C8

S & F SS channel 15 inch for Key board of model Buddy

S & F Nylon Castor wheels for understructure of model Companion C1/ C2 / C3 / C4 / C8

Chair revolving MB or HB Model Meluha Make Methodex

S & F super soft PU foam for seat moulded (black colour) with density 32 fixed of size 460 x 460 mm over 12 mm thick commercial hot pressed plywood

S & F breathable form mesh 460 w x 610 H mm +/- 5% variance for back rest of MB

S & F breathable form mesh 460 w x 700 H mm +/- 5% variance for back rest of HB

S & F Adjustable PU arm of Armrest having handle out 590 mm / Handle In 460 mm

S & F push button with spring in lieu of damaged for Arm rest handles

M & L for refixing the worn out powder coated Slege base with new nickel Bolts

Hydraulic rod for pneumatic height adjustment for Tycoon model

S & F Twin wheel castor 50/60 dia

Chair Visitor / writing TP-Methodex Model Meluha

S & F super soft PU foam for seat moulded (black colour) with density 32 fixed of size 460 x 460 mm over 12 mm thick commercial hot pressed plywood

S & F breathable form mesh 460 w x 560 H mm +/- 5% variance for back rest

S & F Adjustable PU arm of Armrest having handle out 590 mm / Handle In 460 mm

S & F push button with spring in lieu of damaged for Arm rest handles

M & L for under structure of the chair with Black enamel paint

M & L for refixing the worn out powder coated Slege base with new nickel Bolts

S & F Nylon bushed to the under structure U shape legs

Charpoy GI Ply top FD-220( R)

M & L for removing u/ser angle frame or Square frame and S& F 25 mm square MS Pipe of 1.6 mm thick of 890 mm length or Angle frame 25X25X3 mm of 890 mm length (approved brand : TATA/SAIL/JINDAL/BST/SHYAM STEEL/BHUSAN) duly welded the ends to the long rail at an equal distance as shown in the drg for resting the Ply top and connecting to 32 GI Pipe from underneath rails for better grip while placing the Ply top complete all as specified and as directed.

Apply one coat of red/zinc oxide and two coat of black paint to the short rail square pipes fitted at item above item No. 54

S & F 12 mm thick BWR Plywood Size 1980 x 900 mm of approved make Type A / AA in lieu of damaged U/S one over existing charpoy GI Ply top with edges rounded at four corners including fixing with new MS Nut, bolt 65x3 mm & washer Qty 10 No each and painting the existing Square / Angle frame beneath the Ply top complete all as specified and as directed.

Sofa single seater Leatherite Model Carbo Make Godrej

Seat cushion 500 x 550 x 150 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

Back cushion 550 x 550 x 120 mm size made with cool foam 42 density covered with markin cloth duly screwed from back

Arm rest cushion 500 x 160 x 160 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

Side surface cushion 720 x 500 x 180 mm size made with cool foam 42 density covered with markin cloth duly screwed from base

S & F upholstery of soft leatherite cover for single seater of seat size 500x 550 x 150, back size 550 x 550 x 120, side surface 720 x 500 x 180 and Arm cover 500 x 160 x 160 duly stitched and fixed over the cool foam

M & L for removing unserviceable components from following Sofa Sets and S & F new components as per Make & models mentioned against each all as specified and as directed.

2 seater sofa fully cushioned 1755 x 940 x 970 mm (model- TP Allied) (a) M & L for removing worn out upholstery fabric cover and S & F soft linen fabric upholstery cover ( cost of fabric not less than Rs 450 per meter) duly stitched and covered to all exposed surfaces of 2 seater sofa fully cushioned 1755 x 940 x 970 mm (model- TP Allied) completely without disturbing the existing foams/sofa springs/flexible belt/pocket springs etc (b) Polishing the exposed TW frames with Melamine polish

3 seater sofa fully cushioned 2030 x 940 x 970 mm (TP Allied) (a) M & L for removing worn out upholstery fabric cover and S & F soft linen fabric upholstery cover (cost of fabric not less than Rs 450 per meter) duly stitched and covered to all exposed surfaces of 3 seater sofa completely without disturbing the existing foams/sofa springs/flexible belt/pocket springs etc (b) Polishing the exposed TW frames with Melamine polish

Settee 4 seater TP (a)Base rubber foam of 4 inch thick 1800 x 600 mm - 04 No (b)Back rubber foam of 3 inch thick 1800 x 500 mm - 05 No (c) Synthetic cotton replacement -05 Kg (d)Polishing the exposed TW frames with Melamine polish (e)Leatherite tapestry for base and back rest complete costing not less than Rs 550 per mtr for 4 seater settee

Settee 3 seater TP (a) Base rubber foam of 4 inch thick 1350 x 600 mm - 03 No (b) Back rubber foam of 3 inch thick 1350 x 500 mm - 02 No (c) Synthetic cotton replacement - 03 Kg each for 04 No settee (d) Polishing the exposed TW frames with Melamine polish (e) Leatherilte Tapestry for base and back rest complete costing not less than Rs 550 per mtr for 3 seater settee

Settee 2 seater (Corner type) TP (a) Base rubber foam of 4 inch thick 900 x 600 mm - 01 No (b) Back rubber foam of 3 inch thick 900 x 500 mm - 01 No (c) Synthetic cotton replacement - 2.5 Kg for 01 No settee (d)Leatherilte tapestry for base and back rest complete costing not less than Rs 550 per mtr for 2 seater (e)Polishing the exposed TW frames with Melamine polish

Settee 1 seater (a) Base rubber foam of 4 inch thick 450 x 600 mm - 05 No (b) Back rubber foam of 3 inch thick 450 x 500 mm - 04 No (c) Synthetic cotton replacement Kg 1.5 for 12 No settee (d) Leatherilte tapestry for base and back rest complete costing not less than Rs 550 per mtr for 1 seater (e) Polishing the exposed TW frames with Melamine polish

M & L for removing following unserviceable components Furniture items and S & F new items as per Godrej Make and model numbers mentioned against each all as specified and as directed.

S & F Storewell handle with Spindle model No ST95063005 Godrej

S & F Storewell handle model No ST95063359 /new ST D24014 Godrej

S & F Storewell Lock lever with flat keys ST95063399 Godrej

S & F Lock set 2 way with round keys Model ST59464708 for locker of Almirah Godrej

S & F Lock for vertical filing cabinet Model ST95065757 Godrej

S & F Cam lock for Table Perfo Unit Model ST41980088 10 L Godrej

S & F Pedestal lock Model ST95060016 Godrej

S & F Book case lock Model ST95060554 Godrej

S & F Storewell Key hole cover for round key Model ST95063364 Godrej

S & F Storewell lock Ultra exs Model ST 41980094 Godrej

S & F Table T-9 lock Model ST95060679 Godrej

S & F Table T-8 left lock Model FU95060653 Godrej

S & F Table T-8 right lock Model ST95060637 Godrej

S & F Storewell lock lever with round keys Gordian Model ST95060162 Godrej

S & F Storewell lock lever with flat keys Model ST95060017 Godrej

S & F Storewell lock lever with flat keys Gordian Model ST95061142 Godrej

S & F Sliding Door Unit VSDU lock model ST95077072 Godrej

S & F KD Storewell recessed handle lock model ST95074892 Godrej

S & F lock for filing cabinet / OHSU door Model STCL41989813 Godrej

S & F Storewell glazed lock lever with flat keys Model ST95060512 Godrej

S & F compactor Recess handle lock Model ST41989814 / ST95070001 Godrej

S & F book case/shelf 4 or 2 door lock model STCL41989816-CL Godrej

S & F Storewell Slimline main door Cyber lock model STCL41989806 Godrej

S & F metal CAM lock for Pedestal / shutters /Personal locker Model ST59464634 / ST41980081 / ST41980091, ST41980088, STC41989809, ST95077068 and Multidrawer Model ST41980000 Godrej

S & F high quality ball type SS channel 18" for VFC, LFC Godrej

S & F 3 mm plain glass for book case fixed inside existing metal frame with new rubber gasket Godrej

S & F metallic scissor mechanism for door of book case as per Godrej design for smooth & parallel movement

S & F Plastic side end caps (Handles) for door of book case as per Godrej design

M & L for applying metal putty to damaged/uneven surfaces and after drying applying one coat of Zinc oxide and thereafter applying Synthetic enamel paint 2 coat of approved shade (Prince grey / Sliver grey/Olive honey or green / Black ) both externally and internally to complete item with spray machine for glossy finish complete as specified and as directed

Chair cafeteria Model Unwind Make Godrej

Table cafeteria 4 seater Model Time out Make Godrej

Bunk Bed Model COCOA Make Godrej

Cupboard large steel Model Slimline 2 SH Make Godrej

Filing cabinet Vertical 4 door Make Godrej/Featherlite/Wipro/Methodex

Filing cabinet Vertical 2 door Make Godrej/Featherlite/Wipro/Methodex

Filing cabinet Lateral 4 door Make Godrej/Featherlite/Wipro/Methodex

Filing cabinet Lateral 2 door Make Godrej/Featherlite/Wipro/Methodex

Back storage Model 2 door unit sliding Make Godrej/Methodex

Locker unit 4 door Model Personnel storage Make Godrej//Featherlite/Wipro/Methodex

Locker unit 2 door Model Personnel storage Make Godrej//Featherlite/Wipro/Methodex

Book case 4 door glazed Model Interio Make Godrej / Methodex

Book rack steel Double sided (open type) Model Interio Make Godrej

Book rack steel single sided Model Interio Make Godrej

Display storage units glazed 5 shelf Model interio Make Godrej

Almirah large Steel model 5 Shelf glazed Make Godrej

Storewell Plain large Model Interio Make Godrej

Storewell KD Plain large Model Interio Make Godrej

Storewell Plain minor Model interio Make Godrej

Storewell KD minor Model interio Make Godrej

Pedestal storage personal Model Nova Make Godrej

Display rack for periodicals Model interio Make Godrej

Side Table (Glazed) with MS legs Model PISA Make Godrej

Table center (Glazed) with MS legs Model PISA Make Godrej

M & L for preparing the surfaces of following furniture item with sand emery paper, filling uneven surface with wooden putty, and applying PU spray polish of Walnut cherry / Cappuccino shade all as specified and as directed.

Chair dining Model Galaxy Make Godrej

Table dining 4 persons Model Omega Make Godrej

Table study cum computer Model Target plus Make Godrej

Chair Writing Model Target Plus Make Godrej

Table centre 2 tier Model Alice Make Godrej

Table corner Model Edward Make Godrej

Table coffee centre Model Victoria Make Godrej

Wardrobe 3 door 2120 x 1208 x 585 mm Model Glorish Make Godrej

Cap stand TW design with 20 pegs / 30 pegs / 25 pegs

Reception counter model Stylo Godrej

Sofa 3 seater fully cushioned 2030 x 940 x 970 mm

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty wherever required and two coat of synthetic enamel paint of approved shade inside and out side with spray machine complete all as specified and as directed.

Almirah large steel with shelvesFD-351

Almirah medium steel with shelvesFD-350

Locker bedside steel (Single DSC)SD-6210/FD-113

Book case steelFD-90

Locker steel 12 units SK-91

Locker steel 6 unitsFD-127

Locker steel 04 units FD-127

Locker steel 08 unitsSK-92

Rack pigeon hole FD-106

Rack steel 1.7 x 1.5 x 0.60 "SK-84

Rack steel 1830 x 1905 x 760SK-85

Rack for tarpedo war heads SK-89

Rack 6 tier Adj shelf (1905 x 915 x 610 mm)FD-106

Rack 3 tier Adj shelf (990 x 915 x 610 mm)FD-106

Rack steel Adj 3075 x 900 x 500SK-90

Rack steel 6'3" x 36' x 18" with 6 shelfSK-81

Rack type ASK-187

Stool steel 510 / 600 / 760 mm highFD-81

Steel cabinet 78"x36"x19" with 18 No locker (12"x12"x17")TP-Allied

Steel card index cabinet with 4 drawer TP-Allied

Stool steel 2' high Model ST-2 Godrej TP-Godrej

Stool steel with cushion and foot rest PCH 42C12 Godrej

Locker large steel 2 unit 1800 x 1200 x 600GENB/RD/106

Double bunk cot with 2 ply top GENB/RD/103

Stand for fire extinguisher MS angle 45x45x5 of 4' highSK-2

M & L for preparation of wooden surfaces of the following Furniture items completely by scrapping the old tane shade polish, dirt stains on arms, outer surfaces of the item with emery paper or paper machine including filling the uneven surfaces with Bee-wax and then applying 2 or more coats of French polishing to get the glossy look complete all as specified and as directed.

Dias 4500 x 2100 x 150 [SK-269]

Dias 4500 x 1500 x 300 [SK-270]

Display rack periodical with 20 pigeon holes [SK-261]

Display rack periodical with 25 pigeon holes [SK-262]

Equipment rack SK-263

Hat stand onboard with 24 peg [SK-17]

Key board 36 X 26 mm with double glass door [SK-3]

Key board 80 x 60 cm with glass door [SK-4]

Key board 75 x 60 cm with 30 hooks [SK-5]

Key board 3x2 with glass door [FD-117]

Hat stand with mirror (OTM) [FD-233]

Office honour board 750 x 1200 mm [SK-6]

State Board roll names 1200 x 600 mm [SK-7]

State Board roll names 900 x 600 mm [SK-8]

Stool 610 mm high wooden [ F-5]

Stand wash hand [FD-12]

Magazine rack medium [FD-365]

Table 900 x 600 with drawer [FD-283]

Table 900 x 600 without drawer FD-284

Table 900 x 900 FD-291

TeapoyFD-232

Workshop bench 1800 x 900 x 760 mmFD-145

Workshop bench 1500 x 900 x 760 mmFD-145

Wooden box with lid of 10 vertical portion for library SK-10

Wooden box with lid of 6 vertical portion for library SK-11

Table 1520 x 860 x 760 mmFD-289

Table 3050 x 1220 x 760 mmFD-290

Book shelf open large woodenDB-3060

Book shelf open small woodenDB-3061

Board notice 5 x 3 or 5 x 4FD-99

Workshop bench 3300 x 300SK-265

Workshop bench type AFD-57

Workshop bench type B FD-57

Workshop bench type C FD-57

Workshop bench 2 m x 1 m SK-211

Workshop bench 2100 x 300 mmSK-266

Workshop bench COMCEN 8 / 6'6" x 2'6" x 2'6"GE(P)/65

Workshop bench 3 m x 1 m SK-212

agarwal and company

Mahesh Traders

M/s Green Leaf Electricals