Construction of 03 nos. G plus 5 Double Occupancy Hostels at IIM Sambalpur, Odisha Under Phase-II

BILL OF QUANTITY (CIVIL ITEMS)

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

1.0 CARRIAGE OF MATERIAL

1.1 By Mechanical Transport including loading,unloading and stacking

1.1.2 Carriage of earth

1.1.4 Carriage of excavated rock

2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting

out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in

foundation over areas (exceeding 30cm in depth , 1.5 m in width or 10 sqm on plan),

including disposal of excavated earth, for all leads and lifts, disposed earth to be levelled and

neatly dressed.

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including

dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated

soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and cum 6055.72 6055.72 196.00 11,86,921.12

watering, lead up to 50 m and lift upto 1.5 m.

2.25(a) Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead

of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in cum 686.00 686.00 700.50 4,80,543.00

foundation trenches, plinth, sides of foundation etc. complete for all lift.

2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

2.26.2 Ordinary or hard rock

2.27 Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 896.00 896.00 234.75 2,10,336.00

2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

2 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

2.35.2.1 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25

litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane

E.C. 20% with 1% concentration

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from natural sources) cum 617.42 617.42 7,294.70 45,03,893.67

4.3 Centering and shuttering including strutting, propping etc. and removal of form for all heights :

4.3.1 Foundations, footings, bases of columns sqm 2164.63 2164.63 392.15 8,48,859.65

4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm

nominal size, well rammed and consolidated and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top smooth.

5.1.2 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 °

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral

stair cases above plinth level up to floor five level, including the cost of centering, shuttering, cum 124.36 124.36 9,045.75 11,24,929.47

finishing and excluding reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone

aggregate 20 mm nominal size).

5.9 Centering and shuttering including strutting, propping etc. and removal of form for all heights :

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 3594.50 3594.50 392.15 14,09,583.18

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 6463.60 6463.60 927.25 59,93,373.10

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 9323.60 9323.60 736.40 68,65,899.04

5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 7207.20 7207.20 961.30 69,28,281.36

5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 171.18 171.18 764.95 1,30,944.14

5.9.16 Edges of slabs and breaks in floors and walls. 0.00 0.00

5.9.19 Weather shade, chajjas, corbels etc. including edges. sqm 360.00 360.00 951.10 3,42,396.00

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 141331.465 141331.47 107.85 1,52,42,599.04

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. kg 331394.05 331394.05 107.85 3,57,40,848.29

5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to

3 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 2040.00 2040.00 9,504.75 1,93,89,690.00

5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 352.56 352.56 9,655.70 34,04,213.59

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 1765.26 1765.26 9,860.40 1,74,06,169.70

5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 2907.00 2907.00 10,011.35 2,91,02,994.45

5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

5.35 Add for using extra cement in the items of design mix over and above the specified cement

content therein. quintal 3424.73 3424.73 733.50 25,12,039.46

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 70.72 70.72 7,132.25 5,04,392.72

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of

half brick masonry.

6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : Mtr 634.40 634.40 59.45 37,715.08

6.34.1 Brick work with non modular fly ash bricks conforming to IS:12894,

class designation 10 average compressive strength in super structure cum 1431.34 1431.34 8,962.35 1,28,28,170.05

above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 Coarse sand)

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities

etc., including machine polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-Charge.

8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. Mtr 375.96 375.96 568.55 2,13,752.06

8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.

4 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.3 Kiln seasoned and chemically treated hollock wood Cum 12.83 12.83 83,378.05 10,69,740.38

9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm

thick in doors, windows and clerestory window shutters. (Area of opening for glass panes sqm 12.83 176.40 2,263.21

excluding portion inside rebate shall be measured).

9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

nondecorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 539.00 539.00 2392.65 1289638.35

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 639.00 639.00 2172.10 1387971.90

26.91 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer

Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of

approved design by Engineer-in -charge which are machine cut for duct/ shaft covering,

partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum

and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with sqm 666.00 3437.15 2196338.85

properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on

M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying

a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per

requirement at site with necessary stainless steel fasteners and SS screws etc., all complete

as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat

and necessary SS fasteners and SS screws shall be paid separately

9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured). sqm 540.00 540.00 462.35 249669.00

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). sqm 1000.00 1000.00 106.70 1,06,700.00

9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm

1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary

screws, etc. complete.

5 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 Kg.

to 80 Kg. and door width from 701 mm to 1000 mm), with double speed adjustment with Each 80.00 80.00 983.15 78,652.00

necessary accessories and screws etc. complete.

9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a

pair of lever handles of approved quality with necessary screws etc. complete. Each 450.00 450.00 998.35 4,49,257.50

9.89 Providing and fixing chromium plated brass night latch of approved quality including necessary

screws etc. complete. Each 450.00 450.00 952.80 4,28,760.00

9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete:

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt / suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved

9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10

mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design

duly reinforced with galvanized mild steel section

made of required shape & size as per CPWD Specification, uPVC extruded glazing beads,

interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM

gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS

1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc.

Profile of frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealant over backer rod of approved size and quality, all complete as per approved drawing

conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-

in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with /

without high performance coatings as per design requirements and conforming to IS: 3548 &

IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government

Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed >

45 m/sec as per IS 875 — Part 3

(ii) Sites with structure height more than 20m for all wind speeds

9.147.A4 Three track three panels sliding window with two glazed & one wire mesh panels with

Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

6 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen

sash (25 mm & above) x (50 mm & above) with zinc alloy (Zamak) powder coated touch locks sqm 1567.62 1567.62 10,993.55 1,72,33,708.85

with hook. (Height upto 1.2 metre).

9.149 Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC

casement window with necessary screws etc. complete. each 180.00 180.00 231.05 41,589.00

9.153 Providing and fixing steel (white power coated) crescent lock for uPVC

sliding window/ door with necessary screws etc. complete. each 900.00 900.00 198.30 1,78,470.00

STEEL WORK 0.00 0.00

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel Kg. 7525.80 7525.80 133.70 10,06,199.46

primer all complete:

10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10

mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,

comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-charge.

10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts

etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement

as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat

15x3 mm and nuts & bolts complete.

10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness

with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should

have protective guard film of 25 micronsminimum to avoid scratches during transportation and

should besupplied in single length upto 12 metre or as desired by Engineer in-charge. The sqm 1050.00 1050.00 738.65 7,75,582.50

sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM

seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost

ofpurlins, rafters and trusses and including cutting to size and shape

wherever required.

7 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of approved make, in all colours, shades except burgundy,

bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement

mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm

including grouting the joints with white cement and matching pigments etc., complete.

11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting

the joints with white cement and matching pigments etc. The tiles must be cut with the zero 0.00 0.00

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

11.41A.1 Double charge vitrified tile polished finish of size 0.00 0.00

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joint with white cement & matching pigments etc.

11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear

as well as curvilinear portions of the building all complete as per the architectural drawings

with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement

: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry 0.00

admixed with pigment of matching shade including rubbing , curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent Sqm 765.00 765.00 4,481.30 34,28,194.50

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3

fine sand) as per standard design : In 75x75mm deep chase

8 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) each 33.80 33.80 298.25 10,080.85

and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated

with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with the face side PVC film which goes Sqm 735.80 735.80 2,215.15 16,29,907.37

around and wraps the edges and is bonded to the edges and the back side metalized

polyester film so as to make the tile a completely sealed unit.

FINISHING: 0.00 0.00

13.1 12 mm cement plaster of mix :

13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster

1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

Neat cement punning

13.21 Extra for providing and mixing water proofing material in cement per bag of

plaster work in proportion recommended by the manufacturers. per beg of 50kg

13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every

additional height of 3 m or part thereof.

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved

brand and manufacturer, over the plastered wall surface to prepare the surface even and sqm 12006.80 12006.80 156.05 18,73,661.14

smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

9 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot

path, park & lawns driveway or light & traffic parking etc. of required strength, thickness &

size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern

over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of

inter locking paver blocks into the sand bedding layer through vibratory compaction by using 0.00 0.00

plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and

pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications

& direction of Engineerin- Charge

16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design &

16.78 Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers

to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor

grader on prepared surface and compacting with vibratory power roller to achieve the desired

density, complete as per specifications and directions of Engineer-in-Charge.

16.78.1 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

16.10 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity

after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating

with road roller including making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earthwith lead upto 50 metres.

16.80 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse

and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm,

aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per

specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to

be determined during trial length construction, concrete strength not to be less than 10 Mpa at cum 154.44 154.44 4,148.65 6,40,717.51

7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a

mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc.

complete as per direction of Engineer_x0002_in- charge.

16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching

plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming with wire brush etc. complete as

per specifications and directions of Engineer-incharge. cum 207.90 207.90 9,823.80 20,42,368.02

(The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/ recoverable separately).

16.46.1 Providing and filling in position rubberized bitumen hot sealing compound for sealing of Per cm Width

expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. per cm width per 2043.60 2043.60 8.65 17,677.14

Using grade 'A' sealing compound conforming to IS: 1834 m length

10 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement

concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarsesand), including making joints with or without grooves (thickness of joints

except at sharp curve shall not to more than 5mm), including making drainage opening

wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb

edging shall be measured for payment). (Precast C.C. kerb stone shall be approved

by Engineer-in-charge).

ALUMINIUM WORK:

21.10 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

21.10 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 3422.40 3422.40 530.90 18,16,952.16

25.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-

sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as

required and specified,comprising of an outer heat strengthened float glass 6mm thick, of

approved colour and shade with reflective soft coating on surface # 2 of approved colour and

shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide,

dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all sqm 680.49 680.49 3,718.70 25,30,524.78

complete for the required performances, as per the Architectural drawings, as per the

approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs

shall be assembled in the factory/ workshop of the glass processor.

21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing

weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

21.8.1 Upto 5 mm depth and 5 mm width metre 3323.52 3323.52 96.75 3,21,550.56

21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium

windows with necessary screws etc. complete.

21.15.1 Anodized (AC 15) aluminium each 616.00 616.00 89.40 55,070.40

WATER PROOFING:

22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed

portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS 2645 in recommended proportions including rounding off junction of vertical

and horizontal surface.

11 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water

proofing compound in recommended proportion including rounding off junction of vertical and

horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be

100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

22.14.1 Grading roof for water proofing treatment, cement concrete 1:2:4 with 20mm nominal size cum 248.85 248.85 8,042.30 20,01,326.36

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three

layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l

Type ll), having one side decorative lamination and other side balancing lamination, including

IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright

finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with

one side decorative lamination other side balancing lamination Grade-I (exterior grade) in

shelves with screws and fittings wherever required, edges to be sealed with PVC edge

bending tape 2.00 mm thick of approved brand (fittings to be paid separately).

Pre-laminated with decorative lamination one side and other side balancing lamination exterior

Grade - I MDF Board 18 mm thick confirming to IS:14587

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters,

including fixing with necessary screws etc. complete.

9.114.1 Double strip (horizontal type) Each 172.80 172.80 39.70 6,860.16

TOTAL OF SCHEDULE ITEM 26,46,44,667.49

NON-SCHEDULE ITEM

MR-3 Providing and applying surface Stone textured finish with 100% natural granite & ceramic

protection coating of approved shade or approved equivalent make) comprising of water-

borne, penetrating, water repellent EM- primer & super durable water based acrylic silicon

resin clear and super durable dirt and dust resistant protection coat of FSI Clear coat, which

shall be highly water repellant, Anti-algae & anti-fungal in nature to external wall surfaces. The

coating shall also cover hairline cracks with application method which includes one coat of El

primer, one coat of Stoney, all in approved colour and texture. It shall also include preparation sqm 5297.60 5297.60 2,762.31 1,46,33,613.46

of surface, appropriate primer coat etc. applied as per manufacturer's & project consultant

instructions. Scaffolding and staging shall be allowed as required. The finish shall be in

natural colour/ non pigmented, water repellant, resistant to ultra violet, alkali and condensate

formation . All hairline cracks/ crazing shall be covered & shall ensure good breathability for

the substrate. Finished work would be to the satisfaction of the Engineer in charge.

12 Digitally signed by JAYA

DSR 2023 DESCRIPTION Unit Qty-Block (A) Qty Rounded Rate DSR Amount

MR-4 Providing & fixing of aluminium louvers of approved make, of size 79x30.6x1.7 mm having

powder coated aluminium (minimum thickness of powder coating 50 micron) of approved

make conforming to IS: 733 and IS: 1285, fixing over required alumininium tubular frame of

size 63.5x38.1x1.5 mm and with glazing flat size 62x3.9x1.50 (19384) in the existing openings

of shaft with dash fasteners of required dia and size, including necessary filling up the gaps at sqm 283.80 283.80 11,717.00 33,25,284.60

junctions, Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and

the directions of Engineer-in-charge.

MR-5 Providing and fixing of clay tiles of size-225+-5x70+-5 mm on the plastered surface using tile

adhesive and filling the gap with mortar at all heights and making any pattern as per 3D sqm 3405.60 3405.60 3,966.00 1,35,06,609.60

design or approval from the client.

TOTAL OF NON-SCHEDULE ITEM 3,14,65,507.66

13 Digitally signed by JAYA

S. No DESCRIPTIOON

1) SUB-HEAD 1.0 - SANITARY INSTALLATIONS 7,98,858.65 2,65,990.00

2) SUB-HEAD 2.0 - DRAINAGE INSTALLATIONS 3,20,458.40 7,95,181.00

3) SUB-HEAD 3.0 - WATER SUPPLY INSTALLATIONS 9,27,958.50 19,85,818.20

4) SUB-HEAD 4.0 - EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS 1,20,245.25 -

5) SUB-HEAD 5.0 - HYDRO PNEUMATIC PUMPING SYSTEM 1,25,901.00

SUB TOTAL FOR 1 BLOCK 53,40,411.00

GRAND TOTAL FOR 3 BLOCKS 1,60,21,233.00

GRAND TOTAL FOR 3 BLOCKS 1,60,21,233.00

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

SUBHEAD-I: SANITARY INSTALLATIONS

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with

100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including

17.1 cutting and making good the walls andlevel white P.V.C. flushing cistern,

1.1 including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and floors wherever required :

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Providing and fixing white vitreous china extended wall mounting water

closet of size 780x370x690 mm of approved shape including providing &

1.2 17.78 fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 Each 36 14999 539969.40

litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern

fittings, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre & post

1.3 17.80 flushing with water (250 ml & 500 ml consumption), having water inlet from Each 0 7979

back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of

1.4 fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630 x 450mm with a pair of 15mm

CP brass pillar taps.

17.7 A Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting of

1.5 fittings and brackets, cutting and making good the walls whereever required :

(a) White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass

single hole basin mixer

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS :

13983 with C.I. brackets and stainless steel plug 40 mm,including painting of

fittings and brackets, cutting and making good the walls

wherever required :

17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth 250mm Each 0 6946

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

17.10.2 Kitchen sink withought drain board

17.10.2.2 610x 460mm bowl depth 200mm Each 0 3874

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1

17.16A metre long with S.S. triangular plate to Eureopean type W.C. of quality and Each 37 349.15 12918.55

make as approved by Engineer - in charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

1.10 17.31 approved quality) complete with 6 mm thick hard board ground fixed to Each 12 1,607.95 19295.40

wooden cleats with C.P. brass screws and washers complete.

17.34 Providing and fixing toilet paper holder :

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality &

make and as per the direction of Engineer-in-charge..

Providing and fixing PTMT towel rail complete with brackets fixed to

1.14 17.73 wooden cleats with CP brass screws wirh concealed fittings arrangement of

approved qality and colour.

600 mm long towel rail with total length of 645 mm, w mm and effective

height of 88 mm, weighing not less than 190 gms.

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 98 85.00 8330.00

Providing and fixing C.P. brass bib cock of approved quality conforming to

15 mm nominal bore Each 12 506.80 6081.60

Providing and fixing C.P. brass long body bib cock of approved quality

1.17 conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore Each 36 798.95 28762.20

Providing and fixing C.P. brass angle valve for basin mixer and geyser

1.18 points of approved quality conforming to IS:8931 a) 15 mm nominal bore

18.53.1 15 mm nominal bore Each 98 574.30 56281.40

Providing and fixing PTMT soap Dish Holder having length of

1.20 18.65 138mm,breadth 102mm, height of 75mm with concealed fitting Each 36 111.45 4012.20

arrangements,weighing not less than 106 gms.

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

Providing and fixing 8mm thick beveled edge glass mirror with side

polished complete including fixing over marine plywood frame work with

silicon at all levels & height including fixing of molded ,screw and silicon etc.

incl labors, tools, scaffolding at all heights as per Direction of EIC

Providibng and fixing straight type Macfit single body push fit type WC pan

connector with factory supplied spring loaded seal guard of McAlpine, UK

with integral single mould sealing fins made of flexible EVA body, including

bush/adaptor for use with C.I. Pipe as supplied with the pan connector.

Providing and Fixing Handicapped set including white vitreous china floor

mounted European type water closet including dual flush exposed cistern

(4/2 lpf) , Flat Back wash basin with one pair of mounting brackets ,

complete with fittings, seat cover, two no hinged rail 76 cms and five nos of

grab bar 60 cms including 15 mm dia autoclosing pillar cock flow less than

3.0 lpm for Handicaped Toilet complete in all respest as per direction of the

engineer-in-charge.

For physically handicap person consisting of;

a) Wall mounted WC Pan-01 no. with built in Jet of

b) Concealed Cistern Cistern-01 no.

c) Soft Close Seat Cover -01 no

d) Wall hung Wash Basin -01 no

e) Spatula Single lever

f) Wall mounted Grab bar 600 mm long - 2 nos

g) Wall mounted Hinged hand rail 750 x 100-01 no

h) Bottle Trap

i) Waste Coupling

j) Stainless soap dish

k) Tissue paper holder

Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat

hook on door complete.

18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Each 36 222 8004.60

Providing , Fixing , testing and commissioning of CP Brass concealed

divertor with provision of overhead shower with 115mm long bend pipe, in

built spout, spout/shower selector with wall flange complete with all

accessories as required and making good the walls wherever required.

TOTAL FOR SUB HEAD - I CARRIED TO SUMMARY OF PRICES 7,98,858.65 2,65,990.00

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

SUBHEAD-II: DRAINAGE INSTALLATIONS

Providing, fixing, jointing and testing in position of ISI marked UV stabilized

uPVC pipes for soil, waste as per IS : 13592 (Type-B) suitable for rubber

ring joints for vertical pipes and solvent cement joints for horizontal pipes,

including all neccessary specials and fittings (confirming to IS : 14735) i.e.

2.1 bends, tees, junctions (with or without doors), reducers, couplers, cowels,

clamps, hangers, rubber rings, clean outs (door piece), fixing at wall / ceiling

/ floor level supported by clamp & hangers, MS angle etc.(duly painted and

approved by Project Incharge) inside duct/ shaft / suspended from floor

under false ceiling for proper completion of the work. The rubber ring shall

confirm to IS : 5382.

For Soil and Waste pipe

Providing, fixing, jointing and testing in position of ISI marked UV stabilized

uPVC SWR pipe for vent as per IS : 13592 (Type-A) suitable for rubber ring

joints for vertical pipes and solvent cement joints for horizontal pipes,

including all neccessary specials and fittings (confirming to IS : 14735) i.e.

bends, tees, junctions (with or without doors), reducers, couplers, cowels,

clamps, hangers, rubber rings, clean outs (door piece), fixing at wall / ceiling

/ floor level supported by clamp & hangers, MS angle etc.(duly painted and

approved by Project Incharge) inside duct / shaft / suspended from floor

under false ceiling for proper completion of the work. The rubber ring shall

confirm to IS : 5382.

75 mm OD (Vertical ) Metre 58 515 29870.00

Providing, fixing & testing uPVC pipes, conforming to IS : 4985 class III (6.0

2.3 NSI Kg/cm ) including injection moulded fittings IS : 7834, jointing with solvent

cement, cutting and making good the floors and walls and jointing to

trap/waste pipe, complete of outer dia.

Providing and fixing in position uPVC full bore 'P' / 'S' trap with 50 mm

2.4 NSI water seal (IS : 14735) of the following sizes. Making proper connection with

solvent cement.

Providing, fixing and testing & commissioning of uPVC SWR inlet fittings

2.5 NSI with two or three saddle inlets of 40, 50 or 63 mm size, fabricated from 110 Each 69 631 43539.00

mm outer dia uPVC pipes and fixed to uPVC traps with solvent cement joint

complete in all respect.

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

Supply, installation, testing & commissioning of uPVC floor drain with

2.6 NSI supporting clamp ceiling or in sunken portion including cutting and making

good the walls and floors wherever required complete in all respects.

90mm X 63mm for FD Each 55 684 37620.00

Supply, installation, testing & commissioning of uPVC Balcony drain with

2.7 NSI supporting clamp ceiling or in sunken portion including cutting and making

good the walls and floors wherever required complete in all respects.

110mm X 63mm for BD Each 83 713 59179.00

Providing and fixing 1 mm thick Stainless steel (SS-304) Grating with frame

2.8 NSI for floor traps or drains of required pattern including cutting and making

good the floors complete.

125mm X 125mm square grating without hole (Toilet) Each 207 244 50508.00

Providing and laying Cement Concrete 1 : 2 : 4 mix (1 cement : 2 coarse

2.9 sand : 4 graded stone aggregate 20 mm nominal size) 50 mm in bed and

alround uPVC soil & waste pipes including excavation, refilling wherever

required complete in all respects as per standard design.

For Pipe 40mm OD to 75 mm OD Metre 124 200 24800.00

Providing and fixing Upvc Cleanout Plug with suitable inlet keys for

2.10 NSI opening, male threaded joint with socket to upvc soil or waste pipe as

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.2 Single Push Fit Coupler

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

12.42.3 Single tee with door

12.42.5 Plain bend 87.5 deg

12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of approved design to

unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood

2.13 12.43 plugs, screwed with M.S. screws of required length, including cutting brick

work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15

cm diameter and weighing not less than 440 grams.

TOTAL FOR SUB HEAD - II CARRIED TO SUMMARY OF PRICES 3,20,458.40 7,95,181.00

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

SUBHEAD-III: WATER SUPPLY INSTALLATIONS

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

3.2 18.8 the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge. (Concealed work

including cutting chases and making good the walls etc.,)

concealed work including cutting chases and making good the wall etc.

18.8.1 15 mm nominal outer dia pipes Metre 624 497.80 310627

3.2.1 18.8.2 20 mm nominal outer dia pipes Metre 312 537.60 167731

18.8.3 25 mm nominal outer dia pipes Metre 44 627.25 27599

18.8.4 32 mm nominal outer dia pipes Metre 42 739.30 31051

Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting

and making good the walls etc.

Internal work - Exposed on Wall

18.10.3 25 mm nominal bore Metre 12 551.70 6620

18.10.4 32 mm nominal bore Metre 24 667.00 16008

18.10.5 40 mm nominal bore Metre 36 811.90 29228

18.10.6 50 mm nominal bore Metre 22 1048.35 23064

NSI 65 mm nominal bore Metre 18 1178 21,204.00

NSI 80 mm nominal bore Metre 580 1550 8,99,000.00

Providing and fixing Stainless Steel pipe and fitting of grade 316L as per IS :

6911:2017 and conforming to EN-10312 standards complete with press type

fitting (fitting shall be paid for separately) including fixing of the pipe with

3.4 18.85A clamps at 1.00 m spacing including cutting and making good the walls

including testing of joints complete as per direction of Engineer-in-charge.

(The pipe length inserted in the fitting shall not be measured for payment)

Internal work - Exposed on wall (For Hot water from solar)

22 mm outer dia Pipe Metre 1025.25

28 mm outer dia Pipe Metre 8 1272.15 10177

35 mm outer dia Pipe Metre 16 1765.10 28242

42 mm outer dia Pipe Metre 24 2124.00 50976

54 mm outer dia Pipe Metre 10 2699.10 26991

NSI 76 mm outer dia Pipe Metre 202 3101 6,26,422.20

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

Providing stainless steel pipes conforming to JIS 3448 standard complete

with press type fittings for Hot and cold water supply, RO & domestic water

supply system capable to withstand temperature upto 1100 centigrade and

pressure upto 16 bars made from 316 grade of annealed and pickled

stainless steel sheet, with ends deburred at 900 and with length of 3 meters.

Pipe qualifying to 100% eddy current, 100% hydrostatic tested and air-under

water tested under 10kgs. Fittings also conforming to JIS standard in 316

stainless steel grade of approved make in accordance with DVGW

regulation such as tees, coupling, elbow, male adapter, connectors etc with

Black grooved O-ring of EPDM material which can withstand temperature

upto -200 to 1100 C including suitable connection as per site requirement.

Direct contact of stainless steel pipes and fittings to galvanized iron should

be avoided by inserting approved type of filler material as per project

manager ’ s/consultant requirement. Flanges, clamps with hanger at a

spacing of 2 m centre to centre min or as required etc. necessary adapters

for pipes, jointing, sundries, cutting holes in walls/floors/slabs & making good

complete. .(From shaft to internal toilet-geyser)

28 mm dia Metre 1565

Providing and fixing required Stainless Steel Fitting of press fit design of

grade 316L as per IS : 6911:2017 and conforming to EN-10312 standards

with V-profile and with O-ring sealing gasket of EPDM material of required

dia as per direction of Engineer-in-charge.

18.90A.5 For 42mm outer dia pipe Each 4 2418.50 9674

18.90A.6 For 54mm outer dia pipe Each 4 3200.95 12804

Providing and fixing required Stainless Steel Fitting of press fit design of

grade 316L as per IS : 6911:2017 and conforming to EN-10312 standards

with V-profile and with O-ring sealing gasket of EPDM material of required

dia as per direction of Engineer-in-charge.

18.93A.3 For 28 mm x 22 mm outer dia pipe Each 2 1138.10 2276

18.93A.5 For 35 mm x 22 mm outer dia pipe Each 4 1436.85 5747

18.93A.6 For 35 mm x 28 mm outer dia pipe Each 2 1451.10 2902

18.93A.7 For 42 mm x 22 mm outer dia pipe Each 2 2013.05 4026

18.93A.8 For 42 mm x 28 mm outer dia pipe Each 6 2034.35 12206

Making connection of G.I. distribution branch with G.I. main of following

3.11 18.1 sizes by providing and fixing tee, including cutting and threading the pipe

etc. complete :

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

18.13.1 25 to 40 mm nominal bore Each 20 911.90 18238

18.13.2 50 to 80 mm nominal bore Each 40 1785.35 71414

Providing and fixing of gun metal gate valve with CI wheel of approved

quality (screwed ends):

3.12 18.17.1 A 20 mm dia, nominal bore Each 12 539.95 6479

18.17.1 25 mm dia, nominal bore Each 12 622.40 7469

18.17.2 32 mm dia, nominal bore Each 12 689.60 8275

Painting G.I. pipes and fittings with synthetic enamel white paint with two

3.13 18.38 coats over a ready mixed priming coat, both of approved quality for new work

18.38.3 25mm diameter pipe Metre 12 30.25 363

18.38.4 32mm diameter pipe Metre 24 36.35 872

18.38.5 40mm diameter pipe Metre 36 42.65 1535

18.38.6 50mm diameter pipe Metre 22 51.00 1122

NSI 65 mm nominal bore Metre 18 59 1,062.00

NSI 80 mm nominal bore Metre 580 75 43,500.00

Providing and fixing insulation with thermaflex elastomeric nitrile rubber

sheets complete with plastering of 20 mm thick insulation with thermaflex

elastomeric nitrile rubber sheets for hot water & cold water pipes exposed to

sun complete with Aluminium

c) 25mm (9 mm thickness) Meter 6 368 2,208.00

d) 32mm (9 mm thickness) Meter 12 403 4,836.00

e) 40mm (9 mm thickness) Meter 28 450 12,600.00

h) 80mm (9 mm thickness) Meter 212 722 1,53,064.00

Providing and fixing C.P. brass stop cock (concealed) of standard design

3.15 and of approved make conforming to IS:8931.

18.52.1 15 mm dia nominal bore Each 8 670.45 5364

Provide and fixing PTMT ball cock of approved quality, colour and make

3.16 complete with epoxy coated aluminium rod with L.P/H.P.H.D. plastic ball

18.62.5 50 mm dia NB, 242mm long. Weighing not less than 1240 gms. Each 8 1375.95 11008

Providing & fixing in position precast RCC manhole cover and frame of reqd.

3.17 shape and approved quality.

19.19.4.1 Circular shape 560 internal dia. Each 3 2123.80 6371

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

Providing and fixing C.I. double acting air valve of approved quality with

3.18 18.59 bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if

required will be paid separately) :

Providing and fixing M.S fabricated hot dipped galvanized coating puddle

flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to

50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of

required size including cutting holes in centre of plate, inserting pipe &

3.19 NSI making welded (Arc) joint complete. Same shall be installed with TEC

welded joint in position with reinforcement bars of RCC tank wall/slab

including making cutout in shuttering during concrete casting of tank of

following diameter. (Location: overhead tanks.)

NSI 25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate Each 6 782 4,692.00

NSI 50mm dia pipe, 600mm long with size of 350x350x6 mm MS plate Each 7 1180 8,260.00

NSI 65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate Each 2 2183 4,366.00

NSI 80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate Each 4 2662 10,648.00

NSI 100mm dia pipe, 600mm long with size of 400x400x6 mm MS plate Each 2 3067 6,134.00

NSI 150mm dia pipe, 600mm long with size of 450x450x6 mm MS plate Each 3 3624 10,872.00

Providing and fixing motorised butterfly valve with Control Panel & Float

Type Magnetic Level Sensors suitable for 220-230 volts AC to operate valve

3.20 NSI when water level is low in tanks and to close when water level is high in

water tanks including necessary cables, conduits, upto junction box (upto 6

mt qty approx.) etc., complete.

TOTAL FOR SUB HEAD - III CARRIED TO SUMMARY OF PRICES 9,27,958.50 19,85,818.20

SUBHEAD-V: EXTERNAL SEWERAGE & DRAINAGE INSTALLATIONS

Excavating trenches of required width for pipe, cables etc including

excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto

1.5m including getting out the excavated soil,& then returning the soil as

required, in layers not exceeding 20 cm in depth including consolidating each

5.1 deposited layer by ramming ,watering, etc and disposing of surplus

excavated soil as directed, within lead of 50m.

All kinds of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia metre 45 352.15 15847

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light

duty) 455 x 610mm internal dimensiions total weight of cover and frame to

be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.),

with FPS bricks with class designation 7.5

Inside size 120 x 90 cm and 90 cm deep including CI cover with frame

(heavy duty) 500mm internal dia. Total weight of cover and frame to be not

less than 116 Kg. ( weight of cover to be 58 Kg. and weight of frame 58

Kg.)with FPS bricks class designation 75. (Sewerage Line)

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS:

1786 having minimum cross section as 23 mm x 25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing

or chequering besides necessary and adequate anchoring projections on tail

5.11 19.16 length on 138 mm as per standard drawing and suitable to with stand the Each 4 553.70 2215

bend test and chemical resistance test as per specification and having

manufacture's permanent identification mark to be visible even after fixing,

including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (

1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal

size) complete as per design.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

19.27 cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-

5.12 cast R.C.C. horizontal grating with frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 5957.90 23832

TOTAL FOR SUB HEAD - V CARRIED TO SUMMARY OF PRICES 1,20,245.25 -

SUBHEAD-VII: HYDRO PNEUMATIC PUMPING SYSTEM

7.1 NSI Supply, Installation, Testing and Commissioning of compact packaged type

skid mounted, self contained variable frequency drive hydro pneumatic

system complete as per the technical specification complete as required:-

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

(i) In- line vertical multistage centrifugal water pump set (for clear water) with

SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating

complete directly coupled with TEFC induction motor of class "F" insulation &

efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3

phase, 50 Hz A.C. supply. The entire system shall be mounted on a common

base frame i/c common suction and common delivery of G.I heavy class

pipe headers with flanges, interconnecting piping with all required Control

Valves, Non-return valves, pressure gauge with isolation cock etc. complete

(ii) Pressure vessel of non corrosive FRP composite construction lined with

NSF and/or FDA listed material, like high density polyethylene with fully

replaceable polyurethane. Air cell burst pressure of minimum of 3 times the

vessel operating pressure and prototype cycle tested for 80,000 cycles with

charging connections to discharge pipe line with necessary flanges, gaskets,

isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as

(iii) Microprocessor based multi pump contoller/panel with graphical display

and variable frequency drive (VFD) mounted inside a panel complete with

pressure sensor transmitter. The graphical display capable to show number

of pumps running & also communicate with other controllers following with

open protocol through RS485 port. System should be capable to

compensate for frictional losses at lower flows. All alarms should be

displayed in the controller. The panel should also have provision for manual /

automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as

(v) Necessary foundationing bolts, vibration elimination pads etc complete as

Domestic Water booster Pumps at Terrace

Set of Two Pumps( 1 Working+ 1 Standby)

Capacity 200 LPM (Indicative)

7.2 NSI Providing and fixing cast iron butterfly valves conforming

to IS:13095, PN 16/20 complete with bolts,nuts, 3mm thick

compressed asbestos gasket, and two matching flanges as per

table E complete.

Digitally signed by JAYA

S.NO DSR-2023 / NSR DESCRIPTION UNIT GIRLS Rate Amount

HOSTEL- DSR NSR DSR NSR

7.3 NSI Providing and fixing dual plate wafer type C.I. non-return

valve conforming to IS: 5312 rated to PN 16. with bolts, nuts,

3mm thick gasket and matching flanges as per table 'E'

TOTAL FOR SUB HEAD - VI CARRIED TO SUMMARY OF PRICES 1,25,901.00

Digitally signed by JAYA

FIRE FIGHTING WORK

S. No DESCRIPTIOON

FIRE FIGHTING WORKS

1) SUB-HEAD 1.0 - FIRE PUMPS 2,15,488.00 -

2) SUB-HEAD 2.0 - CONTROL PANELS 35,883.00 2,11,236.00

3) SUB-HEAD 3.0 - PIPES & ACCESSORIES 14,34,941.00 6,13,560.00

4) SUB-HEAD 4.0 - FIRE EXTINGUISHERS - 3,21,744.00

SUB TOTAL FOR 1 BLOCK 28,32,852.00

GRAND TOTAL FOR 3 BLOCKS 84,98,556.00

GRAND TOTAL FOR 3 BLOCKS 84,98,556.00

FIRE FIGHTING WORK

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

Supplying, installation, testing and commissioning of electric driven terrace pump

1 27.4 conforming to IS 12469: 2019 suitable for automatic operation and consisting of following,

complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal as required.

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts,

3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot

mounted type with Class 'F' insulation, conforming to IS-12615: 2018.

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as

Suitable cement concrete foundation duly plastered and with anti vibration pads.

TOTAL FOR SUB HEAD - I CARRIED TO SUMMARY OF PRICES 2,15,488.00 -

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

SUBHEAD-II: CONTROL PANELS

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of

cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, interconnection with suitable

size copper conductor cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering etc. complete in all respect,

suitable for main fire pump, pressurisation pump & diesel pump set complete as per

CPWD specification with following in coming and Outgoings, suitable for operation on

415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

630A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Ammeter (0-630 A) with selector swtich & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps

Set of Copper Bus Bar 500A

( Note : All outgoing feeders for pumps should have digital Ammeter with selector

switches, and LED type ON, OFF, trip indicating lamps)

200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for

95 hp pump with overload protection, current sensing type single phase preventor

complete with all acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation. 2 Set

100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta

starter with overload protection, current sensing type single phase preventor complete

with all acceessories and internal wiring required for automatic operation, selector switch

for local/remote, auto/manual/OFF operation. 2 Set

Diesel Engine Control

Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempt

starting device, timers and relays as required, push buttons,start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on

indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch,

0-30 V DC volt meter, and 0-20 A DC Ammeter

All standard relays and accessories for automatic operation of diesel engine System

Controller Designing, Supply, Installation, Testing and commissioning of system controller

to control operation of main electric fire pump, diesel pump, Pressurization pump,

Terrace pump in sequence as per specification consisting of relays, timers. Sensors,

annunciation window for fault indication, complete as per specifications.

System Controller

Designing, supply, installation, testing & commissioning of system controller to control

operation of main electric fire pump, diesel pump, pressurization pump, terrace pump in

sequence as per specification consisting of relays, timers. Sensors, annunciation window

for fault indication, complete as per specification.

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

3 NSR-1 Pressurisation Pump and Terrace Pump Control Panel Set 1 1,86,322.00 1,86,322.00

(a) 63 Amps. TP & N SFC with HRC fuses

(b) Voltmeter (0-500 Volt) with selector switch.

(c) Ammeter (0-63 Amps.) with selector switch & CTs.

(d) Set of 3 phase indication lamp

Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing

(e) type single phase preventor complete with all accessories and internal wiring required for

automatic operation.

(f) Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.

Supplying and making end termination with brass compression gland and aluminium lugs

DSR 2018 / for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable

9.1 of 1.1 kV grade as required. It should be complete as per specifications & directions of

Engineer-in-charge.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering

pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode

5.11 including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as Meter 35 583.00 20,405.00

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.

Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor

armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date

5 NSR ammendment of following size in the existing RCC/HUME/ METAL /GI /CI

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.

5.1 NSR-3 4 core, 25 sq.mm. Aluminium Armoured Meter 15 303.00 4,545.00

5.2 NSR-4 3.5 core, 50 sq.mm. Aluminium Armoured Meter 25 419.00 10,475.00

5.3 NSR-5 3 core, 10 sq.mm. Aluminium Armoured Meter 20 207.00 4,140.00

Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers

Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat

shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 :

2006. It should be complete as per specifications & directions of Engineer-in-charge.

TOTAL FOR SUB HEAD - II CARRIED TO SUMMARY OF PRICES 35,883.00 2,11,236.00

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

SUBHEAD-III: PIPES & ACCESSORIES

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to

IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of required shade complete as

required. (Plant Room piping/Vertical Riser/Downcomer/Floor)

Supplying and fixing single headed internal hydrant valve with instantaneous

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked

conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as

27.9.2 Single headed Stainless steel Set 14 6,632.00 92,848.00

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

9 27.11 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

Providing, installation, testing and commissioning of non-return valve of following sizes

10 27.14 confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated

11 27.15 out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and

12 27.16 female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as

27.16.2 Stainless Steel (Grade 304) Set 28 4,667.00 1,30,676.00

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office

red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm

dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal

14 27.18 diameter size nozzle conforming to IS 903 suitable for instantaneous connection to

interconnect hose pipe coupling as required :

27.18.2 Stainless Steel (Grade 304) Set 14 3,402.00 47,628.00

Supplying and fixing of fire brigade connection of cast iron body with gun metal male

15 27.19 instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required :

27.19.2 4 way - 150 mm dia M.S. Pipe. Set 14,820.00

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in

height with air release valve on top and flanged connection to riser, drain arrangement

with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and

paintingwith synthetic enamel paint of approved shade as required.

31 27.22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as Each 2 1,670.00 3,340.00

DSR 2018 / Providing and fixing in position the industrial type pressure gauges with gun metal /

16.8 brass valves complete as required

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

Providing and fixing standard fireman's axe with heavy insulated rubber handle

conforming to IS: 926 complete.

Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of

accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry

podwer type portable fire extinguishers & accessories. The door shall have a front glass

with lock and key arrangement & shall be painted with one coat of primer & two coat of

34 NSR-10 finished stove enamelled post office red colour paint & "FIRE HOSE" written on front. Each 14 34,577.00 4,84,078.00

(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )

Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration

eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11

Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.

NSR-14 80 mm dia Nos. 17,168.00

NSR-15 65 mm dia Nos. 15,108.00

Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated

ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting &

gland of superior quality having minimum working pressure of 16 kg/sqcm.

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

S.NO. DSR-2025 / DESCRIPTION UNIT Rate Amount

NSR Girls hostel- DSR NSR DSR NSR

TOTAL FOR SUB HEAD - III CARRIED TO SUMMARY OF PRICES 14,34,941.00 6,13,560.00

SUBHEAD-IV: FIRE EXTINGUISHERS

Providing, storing, handling, shifting, installation, testing and commissioning of halon free

portable fire Extinguishers as described below:

Concealed work, including cutting chases and making good the walls etc.

Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of

welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure

37.1 NSR-19 indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, Nos. 20 10,651.00 2,13,020.00

discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re

enamel paint and fixed to wall with brackets complete with internal charge.

Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded

M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating

37.2 NSR-20 guase internal discharge tube 30 cms long high pressure discharge hose, discharge Nos. 14 5,989.00 83,846.00

nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel

paint and fixed to wall with brackets complete with inernal charge.

Water CO2 type of 9 lit.Fire Extinguisher with Gun metal cap and nozzlecomplete in all

respects including wall suspension bracket and conforming to IS: 15683.

Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical

Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted

NSR-22 with pressure indicating gauge, internal tube, squeeze lever type valve fully charged Nos. 1 16,671.00 16,671.00

complete in all respects including wall suspension bracket / trolley mounted and

37.4 confoming to IS:910 .

Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire

extinguisher ISI marked under IS:15683 complete with imported Novec 1230

38 NSR-24 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Nos. 1 8,027.00 8,027.00

Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and

Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium

sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV Square

stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with Inch

proper clamps, hangers, cleats, anchor fasteners etc.

TOTAL FOR SUB HEAD - IV CARRIED TO SUMMARY OF PRICES - 3,21,744.00

Digitally signed by JAYA

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 PRAKASH GURU

ELECTRICAL SUMMARY

SR. NO. DESCRIPTION AREA (SQM)

SOR/ BSR/DSR ITEMS SOR/DSR) REMARK

D INTERNAL ELECTRIFICATION DSR NSR

S.H.-I INTERNAL ELECTRIFICATION 75,64,753.00 -

S.H.-II DISTRIBUTION BOARD 8,21,318.00 10,64,050.00

S.H.-III LIGHT FIXTURES & FANS 12,11,330.00 5,30,091.00

EATHING & LIGHTNING

CABLE, CABLE TRAY &

S.H.-VII UPS SYSTEM 1,09,793.00 -

S.H.-VIII TV & TELEPHONE SYSTEM - 5,953.00

FIRE ALARM SYSTEM

S.H.-IX (ADDRESSABLE TYPE) & PA 8,18,106.00 1,42,945.00

S. H. X LIFT SYSTEM - 43,10,000.00

DATA, WI-FI (PASSIVE

S. H. XIII IP BASED CCTV SYSTEM 5,63,618.00 28,475.00

GRAND TOTAL FOR 1 BLOCK

GRAND TOTAL FOR 1 BLOCK

GRAND TOTAL FOR 3 BLOCK

GRAND TOTAL FOR 3 BLOCK

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S.H.-I INTERNAL ELECTRIFICATION

1.0 DSR-2025 - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

1.10 FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable etc. as required.

2.0 DSR-2025 - Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper

1.11 conductor single core cable in surface / recessed medium class PVC conduit, 2way

modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

3.0 DSR-2025- Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell

1.54 point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed steel conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc.

4.0 DSR-2025- Supplying and fixing suitable size GI box with modular plate and cover in front on

1.31 surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet

and 5/6 A modular switch, connections etc. as required. 135 135 Each 545 73 575

5.0 DSR-2025 - Supplying and fixing suitable size GI box with modular plate and cover in front on

1.56 surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket

outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs

to be used in non residential buildings). 85 85 Each 757 64 345

6.0 DSR-2025 - Supplying and fixing suitable size GI box with modular plate and cover in front on

1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular

socket outlet and 15/16 A modular switch, connections etc. as required 98 98 Each 659 64 582

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

7.0 DSR-2025 - Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and

2.18 earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for the socket out let

and complete with connections, testing and commissioning etc. as required

8.0 DSR-2025 - Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper

1.12 conductor single core cable in surface/ recessed medium class PVC conduit along

with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable

for loop earthing as required. 2450 2450 Metre 373 9 13 850

9.0 DSR-2025 - Wiring for light/ power plug plug with 4 X 4 sq. mm FR PVC insulated copper

1.13 conductor single core cable in surface / recessed medium class PVC conduit along

with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop

earthing as required. 1825 1825 Metre 857 15 64 025

10.0 DSR-2025 - Wiring for circuit/ submain wiring along with earth wire with the following sizes of

1.14 FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

10.2 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire 0 0 Metre 311

10.3 1.14.3 2x6 sq mm + 1x6 sq mm earth wire 240 240 Metre 482 1 15 680

10.4 1.14.4 2x10 sq mm + 1x10 sq mm earth wire 50 50 Metre 621 31 050

10.5 1.14.5 2x16 sq mm + 1x16 sq mm earth wire 25 25 Metre 832 20 800

10.7 1.14.7 4x6 sq mm + 2x6 sq mm earth wire 350 350 Metre 813 2 84 550

11.0 DSR-2025- Wiring for circuit/ submain wiring along with earth wire with the following sizes of

1.7 FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed

steel conduit as required

CIRCUIT / SUBMAIN WIRING

11.1 1.7.7 4x2.5 sq mm + 2x2.5 sq mm earth wire 50 50 Meter 621 31 050

11.2 1.7.8 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 55 55 Meter 744 40 920

11.4 1.7.10 4x10 sq mm + 2x6 sq mm earth wire. 25 25 Meter 1 253 31 325

11.5 1.7.11 4x16 sq mm + 2x6 sq mm earth wire. 25 25 Meter 1 760 44 000

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

12.0 DSR-2025 - Supplying and fixing following modular switch/ socket on the existing modular plate &

1.24 switch box including connections but excluding modular plate etc. as required.

12.1 1.24.6 Telephone Socket Outlet 5 5 Each 168 840

12.2 1.24.7 TV anteena Socket Outlet 5 5 Each 168 840

13.0 DSR-2025 - Supplying and fixing following size/ modules, GI box along with modular base and

1.27 cover plate for modular switches in recess etc as required.

14.0 DSR-2025 - Supplying and fixing two module stepped type electronic fan regulator on the existing

1.25 modular plate switch box including connections but excluding modular plate etc. as

required. 85 85 Each 402 34 170

15.0 DSR-2025 - Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated

1.18 annealed copper conductor, unarmored telephone cable in the existing surface/

recessed steel/ PVC conduit as required.

16.0 DSR-2025 - Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

1.19 conductor PE insulated, shielded with fine tinned copper braid and protected with

PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 150 150 Metre 54 8 100

17.0 DSR-2025 - Supplying and fixing of following sizes of PVC conduit along with the accessories in

1.21 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

18.0 DSR-2025 - Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as

1.38 required. 5 5 Each 112 560

19.0 DSR-2025 - Supplying and fixing modular blanking plate on the existing modular plate & switch

1.26 box excluding modular plate as required. 80 80 Each 47 3 760

20.0 DSR-2025- Supplying and fixing of following sizes of STEEL conduit alonwith the accessories in

1.20 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Total Internal Electrification Carried over to Summary 75 64 753

S.H.-II DISTRIBUTION BOARD

1.0 DSR-2025 - Supplying and fixing following way single pole & neutral, sheet steel, MCB

2.3 distribution board, 240 volts, on surface/ recess, complete with tinned copper bus

bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

1.1 2.3.2 8 way Double Door 1 1 Each 2 773 2 773

2.0 DSR-2025 - Supplying and fixing following way, horizontal type three pole and neutral, sheet

2.4 steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator).

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

3.0 DSR-2025 - Supplying and fixing following ways, surface/ recess mounting, vertical type, 415

2.5 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar,

din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :

Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

3.1 2.5.3 12 way ( 4 + 36 ), Double door, Vertical type 12 12 Each 13 512 1 62 144

4.0 DSR-2025 - Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required

4.2 2.10.5 Tripole pole and neutral 2 2 Each 1 301 2 602

5.0 DSR-2025 - Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB

2.13 DB complete with connections, testing and commissioning etc. as required.

6.0 DSR-2025 - Supplying and fixing following rating, double pole, (single phase and neutral), 240 V,

2.14 residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the

existing MCB DB complete with connections, testing and commissioning etc. as

7.0 DSR-2025 - Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,

2.15 residual current circuit breaker (RCCB), having a sensitivity current upto 300

milliamperes in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

B DISTRIBUTION PANEL (L.T. PANEL)

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing &

commissioning of cubicle type totally enclosed free standing type moisture, dust and

vermin proof Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick

CRCA sheet complete with following equipments including internal wiring with

suitable size wires / cable, interconnection, painting complete as per specification &

drawing. All the incomming and outgoing MCCB shall have 26 KA Ics. All the MCCB

up to 250 Amp shall have thermal release with adustable overload and short circuit

protection and above shall have microprocessor release with adjustable overload,

short circuit & earthfault protection.

8.0 NSR MAIN LT PANEL (DOUBLE OCCUPANCY GIRL'S HOSTEL) - GROUND FLOOR

1 No 400 Amp FP Moulded Case Circuit Breaker

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 No.400A, FP Multi fuction Energy Meter with CT's meter with RS 485 port.

500 Amp TPN aluminium bus bar.

02 No 200 Amp FP Moulded Case Circuit Breaker

01 No 160 Amp FP Moulded Case Circuit Breaker

03 No 100 Amp FP Moulded Case Circuit Breaker

02 No 63 Amp FP Moulded Case Circuit Breaker

05 Nos 63 Amp TPN Miniature Circuit Breaker

04 Nos 40 Amp TPN Miniature Circuit Breaker

05 Nos 25 Amp TPN Miniature Circuit Breaker

02 Nos 40 Amp DP Miniature Circuit Breaker

02 Nos 25 Amp DP Miniature Circuit Breaker

1 Lot of control / power wiring.

Main LT panel (Double Occupancy Girl's Hostel) described as above 1 1 Set 3 61 195 3 61 195

9.0 NON DSR EMERGENCY PANEL (DOUBLE OCCUPANCY GIRL'S HOSTEL) - GROUND

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

1 No 63 Amp FP Moulded Case Circuit Breaker

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 No.200A, FP Multi fuction Energy Meter with CT's meter with RS 485 port.

100 Amp TPN aluminium bus bar.

02 Nos 40 Amp DP Miniature Circuit Breaker

08 Nos 25 Amp DP Miniature Circuit Breaker

01 Nos 40 Amp FP Miniature Circuit Breaker

1 Lot of control / power wiring.

Emergency panel (Double Occupancy Girl's Hostel) described as above 1 1 Set 1 41 684 1 41 684

10.0 NSR LIFT PANEL (DOUBLE OCCUPANCY GIRL'S HOSTEL) - TERRECE FLOOR

1 No. 100 Amp FP Moulded Case Circuit Breaker.

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 No. 100A, FP Multi function energy meter with CT's with RS 485 port.

150 Amp TPN aluminium bus bar.

03 Nos 63A FP RCBO.

03 Nos 25A DP Miniature Circuit Breaker.

1 Lot of control / power wiring.

Lift Panel (Double Occupancy Girl's Hostel) described as above 1 1 Set 1 18 436 1 18 436

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

11.0 NSR UPS PANEL (DOUBLE OCCUPANCY GIRL'S HOSTEL) - GROUND FLOOR

1 No 40 Amp DP Miniature Circuit Breaker

1 Set of ON / OFF indicating lamps with Single Pole MCB.

1 No.40A,DP Multi fuction Energy Meter with CT's meter with RS 485 port.

100 Amp FP copper busbar.

06 No. 25 Amp DP Miniature Circuit Breaker

01 Nos 40 Amp DP Miniature Circuit Breaker.

1 Lot of control / power wiring.

UPS Panel (Double Occupancy Girl's Hostel) described as above 1 1 Set 34 922 34 922

12.0 NON DSR MDB - 1,2, 3, 4 & 5 (DOUBLE OCCUPANCY GIRL'S HOSTELL) - 1ST, 2ND, 3RD,

4TH & 5TH FLOOR

1 No 100 Amp FP Moulded Case Circuit Breaker

1 Set of phase indicating lamps with Single Pole MCB.

1 Set of ON / OFF indicating lamps with Single Pole MCB.

150 Amp TPN aluminium bus bar.

03 Nos 63 Amp FP Miniature Circuit Breaker

03 Nos 40 Amp FP Miniature Circuit Breaker

01 Nos 25 Amp FP Miniature Circuit Breaker

01 Nos 25 Amp DP Miniature Circuit Breaker

1 Lot of control / power wiring.

MDB - 1, 2,4,5,7 & 8 (Boy's & Girl's Hostel) described as above 5 5 Set 56 873 2 84 365

13.00 NSR MCCB BOXES

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

Supply, installation, testing & commissioning of MCCB in Sheet Steel enclosure

made out of 2 mm thick CRCA sheet suitable for 3 phase 4 wire 50Hz AC system

complete with four pole Moulded Case Circuit Breaker suitable for incoming &

outgoing termination including power coating etc. complete as per specification & as

Total Distribution Board Carried over to Summary 8 21 318 10 64 050

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S.H.-III LIGHT FIXTURES & FANS

1.0 DSR-2025 - Supplying and fixing brass batten/ angle holder including connection etc. as required.

2.0 DSR-2025 - Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact

1.41 fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc.

directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS/HFFR PVC

insulated, copper conductor, single core cable and earthing etc. as required. 42 42 Each 259 10 878

3.0 DSR-2025 - Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct

9.1 Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades,

30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,

steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as

below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)

less than 10%, remote (preferably mobile app based) for speed control and all

remaining accessories including safety pin, nut bolts, washers, temperature rise=75

0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz,

single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required

3.1 9.1.1 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 98 98 Each 2 730 2 67 540

4.0 DSR-2025 - Installation, Testing and Commissioning of exhaust fan in the existing opening,

1.50.1 including making good the damage, connection, testing, commissioning etc. as

required. 25 25 Each 556 13 900

5.0 DSR-2025 - Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all

6.0 NSR Supply and installation of following sweep/ sizes metallic blade, heavy duty, single

phase, 230 V A.C. Exhaust Fan in existing opening including making good the

damage, connection, testing and commissioning etc as required.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

7.0 NSR Supply and installation of 400 mm, 230 v A.C.wall/cabin fan including fixing the

bracket, making connection, testing, commissioning etc as required. 28 28 Nos 1 843 51 604

8.0 NSR Supply, Installation, Connecting, Testing and Commissioing of Fire Exit Sign as

omniex model ( illuminated) made from etched Acrylic Sheet of 8 mm thickness, with

LED string illumination including all fittings / fixtures and electrical accessories,

power supply with Battery Charger & Battery backup etc. complete as required.

9.0 NSR Supply, Installation, Testing & Commissioning of 10-12W ( ± 2.2W) linear Mirror

light 2 ft LED integrated batten made of ultra slim aluminium extrusion with housing

part in white finish & PC diffuser part in opal finish.White finish ABS end caps with

decorative circular coloured polycarbonate cap snap fitted on the end cap to

enhance the aesthetic of the fixture. High efficiency long life LED with lumen efficacy

of 100 lm/W (±10%) with viewing angle of 120º.Powered by an integral isolated low

THD electronic LED driver. Lumen Output of 1200 lumens (±10%) .CRI >80, Color

temperature 3000K, THD <20% and PF>0.9,IP20 . Life class of 25,000 hrs @ L70,

Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V,

Frequency :50-60 HZ; Internal Surge Protection:3 KV.

10.0 DSR-2025- Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down

8.2 lighter (Round/ square/ Rectangular) SMD type of following body material with

PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of

2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time

(LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of

initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As

per ANSI Bin), SDCM (Standard Deviation Colour Matching) Powder coated die cast

/Extruded aluminium

Body including trim

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

11.0 DSR-2025- Supplying, Installation, Testing and commissioning of Passive Infrared(PIR)

7.2 technology based occupancy sensor with day light dimming(lighting level shall be

regulated as per availability of natural day light in an area along with occupancy

detection.) having high performance, regulating programmable type, suitable for

connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter

coverage area along with necessary fixing arrangements i/c programming at site etc.

complete as required 54 54 Each 9 760 5 27 040

12.0 NSR Supply, Installation, Testing & Commissioning of Surface/Ceiling mounted 60 watt

LED Down Light with minimum efficacy 110 lm/w complete with integrated electronic

driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC

insulated copper conductor etc. as required. 10 10 Each 7 500 75 000

13.0 DSR-2025- Supplying, Installation, Testing & Commissioning of LED surface mounted Batten

8.9 light of following body material and construction as per IS : 10322 with driver

(Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage

AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal

surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥

0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver

& electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen

maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard DeviationColour Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be of relevant BIS

standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing. complete in all respect i/c external connections with 1.5 sq mm

FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥ 105 <120

lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures

as per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-inCharge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C).

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

14.0 NSR Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy

100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection

and complete u.,ith integrated electronic driver etc directly on wall/ceiling including

connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as

15.0 NSR Supplying and fixing wall mounted light bracket/ fixture made with polycarbonate

suitable for single 9/10 watt LED lamp directly on wall including connections etc as

required. ( But without lamp ) 140 140 Each 1 224 1 71 360

16.0 DSR-2025- Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of following

8.7 body material and construction as per IS : 10322 with driver as per the requirement

with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz,

Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short

& Open circuit protection ,THD < 10% , P. F. ≥ 0.95, IP20, CRI >80, UGR (Unified

Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver

& electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen

maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Color Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be of relevant BIS

standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing. complete in all respect i/c external connections with 1.5 sq mm

FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥ 120 <135

lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-

in-Charge as per requirement. (Thermal management: heat sink of aluminium

housing such that LED junction temperature shall not rise above 90 ° C) Powder

coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

17.0 NSR Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy

duty fan including fixing the bracket, making connection, testing, commissioning etc

as required. 0 0 Each 1 950

18.0 NSR Supply, Installation, Testing & Commissioning of Aviation obstruction light with

Light Emitting Diods (LEDs) similar to Bajaj make cat no. BGAV 302 LED or its

equivalent as per approved list of make complete with all accessories as required.

Total Light Fixtures & Fan Carried over to Summary 12 11 330 5 30 091

S.H.-IV EATHING & LIGHTNING PROTECTION

1.0 DSR-2025 - Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and

5.2 providing masonary enclosure with cover plate having locking arrangement and

watering pipe etc with charcoal/coke and salt as required. 2 2 Set 7 658 15 316

2.0 DSR-2025 - Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

5.4 accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as 6 6 Set 8 351 50 106

3.0 DSR-2025 - Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

5.6 accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as

required. 2 2 Set 15 004 30 008

4.0 DSR-2025 - Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

5.14 connections etc. as required. 75 75 Metre 1 246 93 450

5.0 DSR-2025 - Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for

5.20 connections etc. as required. 0 0 Metre 2 245

6.0 DSR-2025 - Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections

5.15 etc. as required 250 250 Metre 287 71 750

7.0 DSR-2025 - Providing and fixing 50 mm X 5 mm G.I. strip on surface or in recess for connections

2X5.15 etc. as required 50 50 Metre 574 28 700

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

8.0 DSR-2025 - Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing

5.18 along with existing surface/ recessed conduit/ submain wiring/ cable as required. 250 250 Metre 50 12 500

9.0 DSR-2025 - Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing

5.16 etc. as required. 150 150 Metre 84 12 600

10.0 DSR-2025 - Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,

6.1 G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate

including holes etc. complete as required. 15 15 Each 609 9 135

11.0 DSR-2025 - Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

6.7 lightning conductor complete as required. (For horizontal run) 250 250 Metre 238 59 500

12.0 DSR-2025 - Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

6.8 lightning conductor complete as required. (For Vertical run) 375 375 Metre 100 37 500

13.0 DSR-2025 - Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm

6.10 long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as

required. 15 15 Each 140 2 100

14.0 DSR-2025 - Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground

6.11 as required. 350 350 Metre 221 77 350

16.0 NSR Supply, Installation, Testing & Commissioning of Earthing Junction Box size -

400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank

process & powder coating, earthing link (25mm x 6mm copper strip) front door with

glass as complete as required. 1 1 Set 3 250 3 250

Total Earthing & Lightning Protection Carried over to Summary 5 00 015 3 250

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S.H.-V CABLE, CABLE TRAY & TERMINATION

2.0 NSR Supply of following sizes of 1.1KV grade copper conductor XLPE insulated PVC

sheathed (Heavy duty) armoured cable conforming to relevant IS. (Cable shall be

purchased only after approval of cable schedule by architect / consultant).

2.1 NSR 4 core, 16 sq. mm. Cu. Armoured Cable 45 45 Meter 2 044 91 980

2.2 NSR 4 core, 10 sq. mm. Cu. Armoured Cable 20.8845 20.8845 Meter 1 382 28 862

2.3 NSR 4 core, 6 sq. mm. Cu. Armoured Cable 0 0 Meter 870

3.0 NSR Supply of following sizes of 1.1KV grade aluminium conductor XLPE insulated PVC

sheathed (Heavy duty) armoured cable conforming to relevant IS. (Cable shall be

purchased only after approval of cable schedule by architect / consultant).

3.3 NSR 3.5C x 50 Sq.mm. 0 0 Meter 463

3.4 NSR 3.5C x 70 Sq.mm 0 0 Meter 635

3.5 NSR 3.5C x 95 Sq.mm. 0 0 Meter 782

3.6 NSR 3.5C x 120 Sq.mm. 0 0 Meter 980

4.0 DSR-2025 - Supply & making end termination with brass compression gland & aluminium lugs

11.1 for following size of FRLS insulated and FRLS sheathed aluminium conductor cable

of 1.1KV grade as required.

4.1 11.1.32 4 X 6 sq. mm (25mm) For copper armoured cable 4 4 Set 325 1 300

4.1 11.1.32 4 X 10 sq. mm (25mm) For copper armoured cable 6 6 Set 325 1 950

4.2 11.1.33 4 X 16 sq. mm (28mm) For copper armoured cable 8 8 Set 366 2 928

4.3 11.1.20 3.5 X 25 sq. mm (28mm) For aluminium armoured cable 2 2 Set 371 742

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

4.4 11.1.21 3.5 X 35 sq.mm (32 mm) For aluminium armoured cable 12 12 Set 437 5 244

4.5 11.1.22 3.5 X 50 sq.mm (35 mm) For aluminium armoured cable 0 0 Set 484

4.6 11.1.23 3½ X 70 sq. mm (38mm) For aluminium armoured cable 0 0 Set 542

4.7 11.1.24 3½ X 95 sq. mm (45mm) For aluminium armoured cable 0 0 Set 684

4.8 11.1.25 3½ X 120 sq. mm (45mm) For aluminium armoured cable 0 0 Set 710

4.9 11.1.26 3.5 X 150 sq.mm (50 mm) For aluminium armoured cable 0 0 Set 798

4.10 11.1.27 3½ X 185 sq. mm (57mm) For aluminium armoured cable 2 2 Set 798 1 596

5.0 DSR-2025 - Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power

10.8 cable of 1.1 KV grade of following size on cable tray as required.

5.1 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) 355.8845 355.885 Meter 53 18 862

5.2 10.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 0 0 Meter 109

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

6.0 DSR-2025 - Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power

10.7 cable of 1.1 KV grade of following size on wall surface as required.

6.1 10.7.1 Upto 35 sq. mm (CIamped with 1 mm thick saddte) 45 45 Meter 64 2 880

6.2 10.7.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 0 0 Meter 151

6.3 Above 95 sq. mm and upto 185 sq. mm (Clamped with 25/40 x 3 mm MS flat

8.0 DSR-2025 - Supplying and installing following size of perforated Hot Dipped Galvanised Iron

4.6 cable tray (Galvanisation thickness not less than 50 microns) with perforation not

more than 17.5%, in convenient sections, joined with connectors, suspended from

the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

8.1 4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. 35 35 Meter 754 26 390

8.2 4.6.2 150 mm wide x 50 mm depth x 1.6 mm thickness. 10 10 Meter 803 8 030

8.3 4.6.4 300 mm wide x 50 mm depth x 1.6 mm thickness. 12 12 Meter 1 062 12 744

8.4 4.6.6 450 mm wide x 50 mm depth x 2.0 mm thickness. 10 10 Meter 1 439 14 390

8.5 4.6.7 600 mm wide x 50 mm depth x 2.0 mm thickness. 45 45 Meter 1 925 86 625

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

9.0 DSR-2025 - Supplying and installing following size of perforated Hot Dipped Galvanised Iron

4.7 cable tray "bends" (galvanisation not less than 50 microns) with perforation not more

than 17.5%, in convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

9.1 4.7.1 100 mm wide x 50 mm depth x 1.6 mm thickness. 4 4 Meter 1 252 5 008

9.2 4.7.2 150 mm wide x 50 mm depth x 1.6 mm thickness. 2 2 Meter 1 368 2 736

9.3 4.7.4 300 mm wide x 50 mm depth x 1.6 mm thickness. 3 3 Meter 1 977 5 931

9.4 4.7.6 450 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 2 844 5 688

9.5 4.7.7 600 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 3 985 7 970

9.6 4.7.12 750 mm wide x 62.5 mm depth x 2.0 mm thickness. 0 0 Meter 5 122

10.0 DSR-2025 - Supplying and installing following size of perforated Hot Dipped Galvanised Iron

4.8 cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

than 17.5%, in convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

10.1 4.8.1 100 mm wide x 50 mm depth x 1.6 mm thickness. 4 4 Meter 1 427 5 708

10.2 4.8.2 150 mm wide x 50 mm depth x 1.6 mm thickness. 2 2 Meter 1 486 2 972

10.3 4.8.4 300 mm wide x 50 mm depth x 1.6 mm thickness. 3 3 Meter 2 294 6 882

10.4 4.8.6 450 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 3 324 6 648

10.5 4.8.7 600 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 4 687 9 374

11.0 DSR-2025 - Supplying and installing following size of perforated Hot Dipped Galvanised Iron

4.9 cable tray "Cross member"(galvanisation not less than 50 microns) with perforation

not more than 17.5%, in convenient sections, joined with connectors, suspended

from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

11.1 4.9.1 100 mm wide x 50 mm depth x 1.6 mm thickness. 4 4 Meter 1 427 5 708

11.2 4.9.2 150 mm wide x 50 mm depth x 1.6 mm thickness. 2 2 Meter 1 486 2 972

11.3 4.9.4 300 mm wide x 50 mm depth x 1.6 mm thickness. 3 3 Meter 2 513 7 539

11.4 4.9.6 450 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 3 770 7 540

11.5 4.9.7 600 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 4 702 9 404

11.0 DSR-2025 - Supplying and installing following size of perforated Hot Dipped Galvanised Iron

4.10 cable tray "Cross member"(galvanisation not less than 50 microns) with perforation

not more than 17.5%, in convenient sections, joined with connectors, suspended

from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

11.1 4.10.1 100 mm wide x 50 mm depth x 1.6 mm thickness. 4 4 Meter 1 771 7 084

11.2 4.10.2 150 mm wide x 50 mm depth x 1.6 mm thickness. 2 2 Meter 2 049 4 098

11.3 4.10.4 300 mm wide x 50 mm depth x 1.6 mm thickness. 3 3 Meter 2 991 8 973

11.4 4.10.6 450 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 3 929 7 858

11.5 4.10.7 600 mm wide x 50 mm depth x 2.0 mm thickness. 2 2 Meter 5 418 10 836

13.0 DSR 2023 - Constructing brick masonry chamber for underground C.I. inspection chamber and

19.30 bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with

(CIVIL) frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame

to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C.

top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete as per standard design :

13.1 19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets.

13.1.1 19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 1 Each 8 151 8 151

13.2 19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

13.2.1 19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 1 Each 9 594 9 594

13.3 DSR 2023 - Extra for depth beyond 45 cm of brick masonry chamber

13.3.1.1 19.31.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 1 Meter 6 681 6 681

13.3.2.1 19.31.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 1 Meter 7 790 7 790

14.0 DSR-2025 - Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars

15.14 jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete.

HDPE PIPE FOR LV SERVICES

15 DSR-2025 - Supplying and laying of following size DWC HDPE pipe ISI marked along with all

15.15 accessories like socket, bend, couplers etc. conforming to IS 14930, Part II

complete with fitting and cutting, jointing etc. in the existing trench, complete as

15.1 DSR-2025, 200 mm dia (OD-200 mm & ID-175 mm nominal)

15.2 DSR-2025, 160 mm dia (OD-160 mm & ID-135 mm nominal)

15.3 DSR-2025, 90 mm dia (OD-90 mm & ID-76 mm nominal)

Total Cable, Cable tray & Termination Carried over to Summary 9 09 060 2 85 052

S.H.-VII UPS SYSTEM

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

1.0 DSR-2025 - Supplying, installation, Testing & Commissioning of following capacity at full load

26.1 (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable

for Single Phase input, Single Phase output AC Supply. The UPS shall include a

Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH

capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup

time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass

switch along with provision for manual bypass, suitable isolation transformer for

additional protection against neutral faults etc. The UPS systems shall be

Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor

(IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation)

Technology. The quality of design, manufacturing and inspection process should

confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating

efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total

harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be <

5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme

power factor kit to be include to limit the input pf to 0.99 and output power factor

shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall

be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be

suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output

AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload

capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40

0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter

distance, Protection for Under voltage, over voltage, abnormal output voltage,

battery over charging, output over current, short circuit, battery deep discharge , 10

KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall

comply with low voltage electromagnetic compatibility (EMC) achieved as per EN

6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent

(VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with

IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open

protocol for BMS integration as per approved by Engineering in charge. Required

battery racks, DC breaker of suitable rating and interconnecting copper conductor

cable of suitable size and connectors and all required accessories are inclusive in

Suitable The UPS shouldbetween

of Cables have QR code which

battery should

bank and UPScontain drawing,

and battery test report

fuse protection.

Total UPS System Carried over to Summary 1 09 793

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S.H.-VIII TV & TELEPHONE SYSTEM

1.0 Supply and fixing of telephone distribution board (tag blocks) in hinged type MS box

duly powder coated complete with bakelite sheet, Krone connector etc including

termination of incoming and outgoing telephone wire etc. complete as required.

1.1 NSR 10 pair telephone distribution board. 1 1 Nos. 559 559

2.0 NSR Supply and wiring of telephone cable 0.61mm dia annealed tinned copper conductor

PVC insulated and PVC sheathed unarmoured telephone cable in existing conduit in

concealed/ surface system / existing cable tray complete as required.

2.1 10 pair telephone unarmoured cable. 50 50 Meter 60 3 000

3.0 NSR Supply, erection, testing and commissioning of following sizes of splitter of

aluminium die cast body in suitable size of G.I. Box.

Total Cable, Cable tray & Termination Carried over to Summary 5 953

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S.H.-IX FIRE ALARM SYSTEM (ADDRESSABLE TYPE) & PA SYSTEM-

(A) FIRE ALARM

1.0 DSR-2025- Supplying, installation, testing and commissioning of micro processor based

28.2.1 intelligent addressable main fire alarm panel, central processing unit with the

following loop modules and capable of supporting not less than 240 devices

(including detectors) and minimum 120 detectors per loop and loop length up to 2

km, network communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history log in the non

volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up

with 24 volt sealed maintenance free batteries with automatic charger. The panel

shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the schedule

of work under SH: PA System) and shall be complete with all accessories . The

panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over

IP complete as per specifications.

1.1 DSR-2025- Two Loop Panel.

2.0 DSR-2025- Supplying, installation, testing & commissioning of intelligent analog addressable

28.2.4 photothermal detector complete with mounting base complete as required. 10 10 Nos. 3 004 30 040

3.0 DSR-2025- Supplying, installation, testing & commissioning of intelligent addressable thermal

28.2.9 detector with rate of rise cum fixed tempreature thermistor complete with base as

required. 2 2 Each 2 866 5 732

5.0 DSR-2025- Supplying, installation, testing & commissioning of addressable manual call point

28.2.14 complete as required. 28 28 Each 4 063 1 13 764

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

6.0 DSR-2025- Supplying, installation, testing & commissioning of addressable horn cum strobe

28.2.15 complete as required. 28 28 Each 3 682 1 03 096

7.0 DSR-2025- Supplying, installation, testing & commissioning of addressable fire control module

28.2.10 complete as required. 28 28 Each 3 156 88 368

8.0 DSR-2025- Supplying, installation, testing & commissioning of response indicator on

28.2.5 surface/recessed MS Box having two LED, metallic cover complete with all

connections etc as required. 2 2 Each 306 612

9.00 DSR-2025- Supplying, installation, testing & commissioning of fire fighter phone jack complete

10.00 DSR-2025- Supplying, installation, testing & commissioning of fire fighter telephone handset

28.2.17 complete as required. 2 2 Each 6 016 12 032

12.00 NSR Supplying & laying of 2x1.5 sqmm fire survival unarmoured cable, 600/1000V rated

with annealed copper conductor having glass mica fire barrier tape covered by an

extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and

LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as

required. 744 744 Meter 135 1 00 440

13.00 DSR-2025- Supplying and drawing following sizes of FRLS PVC insulated copper conductor,

1.17 single core cable in the existing surface/recessed steel/ PVC conduit as required.

14.00 DSR-2025- Supplying and fixing of following sizes of STEEL conduit alonwith the accessories in

1.20 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

15.0 NSR Supply, Installation, Testing and Commissioning of Addressable Output Module with

inbuilt isolators. Shall be UL / EN54 certified. 2 2 Nos. 3 695 7 390

PUBLIC ADDRESS SYSTEM

17.0 NSR SITC of IP based Networkable touch screen paging station for selection of zones,

supervision of system status, setting of scheduled broadcasts with the following

. Built-in monitoring loudspeaker

. Detachable goose-neck microphone

. LCD touchscreen display

Total Addressible Fire Alarm & PA system Carried over to Summary 8 18 106 1 42 945

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S. H. X LIFT SYSTEM

1.0 NSR PASSANGER LIFT (13 PASSENGER) (MRL)

NSR Supply, installation, testing, commissioning,and final testing of 13 Passenger (884

KG) automatic lift complete in the shaft well and pit already constructed as per

CPWD specification including automatic rescue device (ARD), All standard

equipments, accessories and control equipments as per manufacturer's design and

as per CPWD specification (Part III LIFTS) on turnkey basis, Conforming to

NBC/statutory norms and fulfilling following requirements.

(i) Type : Passenger lift.

(ii) Load : As per specified elsewhere 13 Passenger (884 KG) (for each person

standard weight 68 Kg.)

(iii) Speed : 1.50 Meter / second.

(iv) Control : ACV3F, 32 bit Microprocessor integrated serial communication control

system with RMS (Remote monitoring systema0 / BMS (Building Monitoring system)

supporting software.

(v) Motor / Machine : Permanent magnetic synchronous gearless motor.

(vi) Operation : Simplex collective selective with / without lift attendant.

(vii) Total rise : About 3 meters (Approx) two stops only.

(viii) Landings :- All floors on same side.

(ix) G+5 floor (6 Stops/6 Landings)

(x) Signals : Digital car position indicator, car travel direction indicator inside car & at all

landings, Voice annunciator with suitable music shall provide in the lift car.

(xi) Shaft size : As per manufacturer's design and as per CPWD specification (Part III

Lifts), shaft to be constructed separately.

(xii) Guide rail : As per manufacturer's specification.

(xiii) Lift & Car size : As per manufacturer's design and as per CPWD specification (Part-

(xiv) Car entrance : As per manufacturer's design and as per CPWD specification (Part-III

(xv) Landing entrance :- As per manufacturer's design and as per CPWD specification

(Part-III Lifts)

(xvi) Car Door : S.S. (Stainless steel) hairline finish centre / Telescopic opening door with

(xvii) Landing door : S.S. (Stainless steel) hairline finish centre / Telescopic opening door

with vision panel.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

(xviii) Door operation : Automatic electric power operated door, full height infra red curtain

with multiple cross / cross light beams.

(xix) Car interior : S.S. (Stainless steel) panel with hair line finish on all sides.

(xx) Car floor : Anti skid PVC flooring on heavy duty MS (Mild Steel) platform.

(xxi) Car ceiling & lighting : S.S. (Stainless steel) finishes with aesthetic appearance with

LED ceiling lights.

(xxii) Car ventilation : Pressure fan / Blower fan (Car fan with automatic appearance with

LED ceiling lights.

(xxiii) Emergency lighting in car : Battery operated emergency lighting in the lift car.

(xxiv) Intercom system : Battery operated Intercom system in lift car, machine room and

ground floor / control room.

(xxv) Emergency alarm : Battery operated alarm bell system in lift car & control room /

(xxvi) Position of machine room : Directly above the hoist-way.

(xxvii) Electric power supply : AC 415V, 3 phase, 50 Hz & AC 230V, 1 Phase 50 Hz

terminated in machine room.

(xxviii) Fire man switch : Fire man switch at machine room / Terminal landing.

(xxix) All car panel buttons and all floor switches must be with brail language as per lift act.

(xxx) Audio visual indication in the lift car showing overloading shall be provided such that

doors kept open till excess load is removed.

(xxxi) Spring buffer / Hydraulic buffers shall be provided.

(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided.

(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift

pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machines etc.

(xxxiv) In the hoist way facia plate shall be provided.

(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with

fixtures, exhaust fan, plug points and 3 phase 440 V power supply shall be made

available by the department in lift shaft, machine room or at desired level.

(xxxvi) Car top safety barricade shall be provided.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

(xxxvii) ARD (Automatic rescue device) : Solid state inbuilt automatic rescue device (ARD)

for automatically rescues passengers trapped in the lift car in between floors in the

event of power failure. Automatic operation and immediate action in the event of

mains failure capable to move the lift to the nearest landing, opens the automatic

door of the lift car and floor. Sealed maintenance free battery backup with automatic

charging unit and auto changeover device on mains failure.

Total Lift system Carried over to Summary 43 10 000

S. H. XII DATA, WI-FI (PASSIVE COMPONENTS)

1.0 DSR-2025- Supplying, Installation, Testing and commissioning of CAT6A Copper Information

39.15 Outlet (IO) with face plate of color as per site requirement, should have ETL/UL

verification program certificate for compliance with ANSI/TIA-568.2-D. All copper

Cable and Components should be from same OEM to maintain compatibility and

interoperability etc. complete as required 175 175 Nos. 302 52 850

2.0 DSR-2025- Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid

39.18 copper cable in existing conduit/ on surface, U/FTP, LSZH, NonPlenum, Horizontal

(solid) Cable suitable for high speed data networking application supporting upto

10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with

color coded insulation for easy indentification should have FLAME PROPERTIES i.e.

Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards

compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew

should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should

have been tested and verified by UL/ ETL etc.complete as required.

2.2 39.18.2 2 Run of cable 0 0 Meter 124

2.3 39.18.2 3 Run of cable 0 0 Meter 124

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

3.0 DSR-2025- Supplying Installation Testing and Commissioning of 24 port Cat 6 Patch Panel

39.11 loaded. Must be of 1U height with clear label holders and white label with the panel

24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for

compliance with ANSI/TIA-568.2-D etc. complete as required. 12 12 Each 5 278 63 336

4.0 DSR-2025- Supplying, installation, Testing and commissioning of following capacity 24 port

39.3 Layer 2 indoor Network Switch having features and specifications etc.as mentioned

here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base

-T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of

min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table.

Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC

Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo

Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups

1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3,

UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol

VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS ,

TACACS+ Authentication, Ǫ oS: 802.1P, 8 queues per port, Ǫ oS : WRR,

Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number,

time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP

server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP,

OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit

Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC,

RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of

Telecommunication, Government of India etc. complete as required.

4.1 39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each

copper port supporting 802.3at PoE+ min. 3 3 Each 1 25 393 3 76 179

4.2 39.3.2 24 port Layer 2 Non-PoE Network Switch 6 6 Each 86 163 5 16 978

5.0 DSR-2025- Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord

39.13 should have ETL/UL verification program certificate for compliance with ANSI/TIA-

568.2-D etc. complete as required.

5.1 39.13.1 Copper Patch Cords of length 1m (3ft) 175 175 Each 173 30 275

5.2 39.13.2 Copper Patch Cords of length 3m (10ft 175 175 Each 405 70 875

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

7.0 DSR-2025- Supplying, Installation, Testing and commissioning of CAT6A Copper Information

39.15 Outlet (IO) with face plate of color as per site requirement, should have ETL/UL

verification program certificate for compliance with ANSI/TIA-568.2-D. All copper

Cable and Components should be from same OEM to maintain compatibility and

interoperability etc. complete as required. 175 175 Each 302 52 850

9.0 DSR-2025- Supplying and drawing following core Fiber Optic Cable having corrugated steel

39.19 armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic

jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC

G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated

Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature

should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C,

Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22db /

km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D &

Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding

Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm correspondingly. The Dispersion value <

3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cutoff wavelength < 1260

nm i/c splicing & marking etc complete as required.

9.1 39.19.1 Single Mode 6 Core Optical fiber cable 110 110 Meter 64 7 040

9.2 39.19.2 Single Mode 12 Core Optical fiber cable 0 0 Meter 89

10.0 DSR-2025- Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted

39.21 cable saddles for jumper management, suitable to manage both splices and

terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted

bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for

900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight

buffered fiber per adapter, Removable front and rear covers for better access to

interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit

consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

11.0 DSR-2025- Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to

39.21 LC Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber

corning single mode G652D, Cable Type 2mm with Mechanical specification Apex

Offset < 50 µ m, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R

<25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C,

Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex

etc complete as required.

12.0 DSR-2025- Supplying, Installation, Testing and commissioning of indoor Wireless Access Point

39.7 for Low Density use having features and specifications etc. as mentioned here under

- Dual-band Wi-Fi6 (802.11ax) 574Mbps (2.4GHz) + 1200Mbps (5GHz), WI-FI 6

Certified, 1 x RJ45 console port, 1G LAN POE Port, factory reset,

WPA/WPA2/WPA3 ™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast

disable, MAC address access control, Internal RADIUS server, SNMP,

Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS

with AP, Wireless Client, Web (HTTP), Secure Socket Layer (SSL), Traffic control,

Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-

PSK/WPA2- PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/

IP ACL for networks, Certifications: MTCTE, CE, FCC. Should also work as

Standalone and must be Compatible with S/W & H/W Controller with addtional

features like - Real-Time Monitoring and Alerts, Rich Advanced Features,

Centralized Device Management, Role-Based Administration, Real-Time Monitoring,

VLAN and Access Control, Auto RF Management and Bandwidth Optimization,

Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted

Telecom Portal of Department of Telecommunication, Government of India etc. 20 20 Each 22 739 4 54 780

complete as required.

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

13.0 DSR-2025- Supplying, Installation, Testing and commissioning of Outdoor Wireless Access

39.9 Point having features and specifications etc. as mentioned here under - WIFI 6

Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset, 4 x internal

antennas, the transmission coverage of shall be minimum 80 meters in radius, AP

should have transmission power minimum of 22 dBm, The AP shall provide a

minimum of 29 dBm EIRP for both 2.4 GHz and 5 GHz frequencies. Feild

deployment shall be with EIRP as per regulatory guidelines, AP shall have dual-band

Omni-directional Antenna, either internal or external. Feild deployment shall be with

EIRP as per the WPC guideline, WPA/WPA2/WPA3 ™ Personal/Enterprise, WEP

64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS

server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point,

WDS, WDS with AP, Wireless Client, Web (HTTP), Secure Socket Layer (SSL),

Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced

security – WPAPSK/WPA2-PSK/WPA3-PSK and RADIUS client, and Cipher

negotiation, and MAC/ IP ACL for networks, IP68 water/dustproof standard, 6KV

Surge Protection; 4KV ESD Protection (contact), 6KV (air), Operating ambient

temperature (-5~50 ° C), Grounding point support, IEC 60601-1-2 EMC Medical

Electrical Equipment Testing and Certification, EN50121-1 & EN50121-4 for

Wireless Application. Certifications: MTCTE, CE, FCC. Works as Standalone,

Compatible with S/W & H/W Controller with addtional features like - Real-Time

Monitoring and Alerts, Rich Advanced Features, Centralized Device Management,

RoleBased Administration, Real-Time Monitoring, VLAN and Access Control, Auto

RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal

Authentication.OEM/Product must be on Trusted Telecom Portal of Department of

Telecommunication, Government of India etc

14.0 DSR-2025 - Supplying and fixing of following sizes of PVC conduit along with the accessories in

1.21 surface/recess including painting in case of surface conduit, or cutting the wall and

making good the same in case of recessed conduit as required.

Total Data, WiFi including Active components Carried over to Summary 34 51 572

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

S. H. XIII IP BASED CCTV SYSTEM

1.0 DSR-2025- Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera

40.3 having following specifications and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display

Camera title, Date & Time in live & recorded video

2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at

night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or

better) True Day & Night High Performance Mechanical IR cut filter with auto switch,

Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50

meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s

electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light

Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu,

4) Wide Dynamic Range:- WDR (120dB or more)

5) Digital Noise Reduction:- DNR (3D) On/Of

6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream:

4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness

adjustable through client software or web browser, Edge Analytics: Tripwire,

Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted

execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering,

HTTPS, trusted upgrade

9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card

slot upto 512 GB. It should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to

11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP

conflict detection; memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS,

SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic.

and Speakers as per site requirement.

16) Power Input: The camera should support simultaneous dual power input — 12

VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the

event of a failure in one power source.

17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE

18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body

19) Operating Condition:- Ambient Temperature:- (- )05 ° C to 50 ° C, humidity 95%

(max) (non-condensing)

20) IR life: 40000 hours or higher

21) Video Bit rate: 32 KBPS - 8 MBPS or bette

22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

22.3.2 4MP @ 25/30fps@1440P (2560x1440) Dome Camera with 2.7 to 4 mm ~12 to

13.5mm or better Varifocal Motorized lens. 21 21 Nos. 23 754 4 98 834

2.0 NSR Supply, Installation, Testing and Commissioning of UL Listed , ONVIF profile S & G ,

1/1.8" progressive CMOS, IP Bullet Camera , Full, HD 2 MP, fixed Lens, 30 FPS

@2MP , Triple Stream with Edge Based Analytics : perimeter intrusion detection ,line

crossing detection , stationary object,face detection, cross counting. True Day/Night

with IR Cut Filter with auto switch , Shutter Speed 1/5s ~ 1/10,000 s, IR Illuminator

30 Meter Min Effective Range, 100DB Wide Dynamic Range, Alarm 1/1, H.265,

H264 Compression, PoE, Vandal Proof IK10 etc. 1 1 Each 28 475 28 475

3.0 DSR-2025- Supplying Installation Testing and Commissioning of following Channel Network

40.11 Video Recorder (NVR) with camera licenses to record for all channels having

specifications and features etc as mentioned below :

1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera

Licenses to record per NVR and to provide a live view, storage and simultaneously

Multi-channel playback of all IP camera or more and must be ONVIF with minimum

support of 384 Mbps incoming Bandwidth.

2) NVR should support video compressions : H.265 or better, H.264, MJPEG

3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with

G.711U/A, G.711u, PCM, G726 audio compressions.

4) Intelligent auto power on when power resumes after power outage.

5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and

RAID support of RAID 0/1/5/6/10.

6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x

RS232, 1x eSATA Port

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0)

8) Video Output Ports: 2x HDMI and 2 VGA

9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of

external sensors and output devices like hooter/ Siren etc.

10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5

designated mobile number for power failure, HDD failure, vandalism, tempring,

network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone)

for alerts and viewing.

12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP,

IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, AutoRegistration,

ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote

monitoring without any public IP need.

13) Standards: CE, FCC, RoHS, BIS Certified

14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing)

16) The VMS application shall support all the features & functionalities of the offered

17) VMS should consist Licenses for all channels to record Cameras with General,

motion detection, intelligent, alarm and POS recording modes. VMS should be

provided with Camera Licenses , with no dependency of VMS licenses by binding

with the MAC address of the cameras to achieve the functionality

18) The NVR OEM shall be responsible for providing a mobile application

compatible with both Android and iOS devices, enabling remote monitoring and

playback of cameras/NVR footage

19) The OEM must provide its own DDNS server hosted in India, eliminating the

need for a public IP address for remote monitoring over the Internet.

20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode

21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP;

1080p; 720p; D1; CIF; QCIF

22) When alarm recording is enabled and an event occurs, you can click the alarm

icon on monitoring page to view the alert details. The snapshot function is supported

on monitoring and playback page

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

23) The Network Video Recorder (NVR) shall be configured to send email whenever

a system message is created or an alarm event occurs. The email server shall be a

valid SMTP server. Each recipient email address shall be configured to receive any

combination of critical, warning, or informational messages or alarm notifications.

When an alarm occurs, the email message includes the NVR name, time of alarm

and a list of camera that is configured to record upon alarm

24) It should have Web and GUI interface

25) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face

detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8

Channel Smart Motion Detection

26) Face Recognition Database Capacity: It should support total Blacklist and

Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of

12 face images/sec and facility to add Name, gender, birthday, address, credential

type, credential No., countries & regions and state to each face image.

27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group,

glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender

28) ANPR Capability: It should support ANPR Camera with License plate, plate

color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration

location etc vehicle attributes

29) Alarm Notifications based on: Motion detection, video tampering, video loss,

scene changing, PIR alarm, Camera external alarm, Face detection, face

recognition, perimeter protection (intrusion and tripwire), ANPR, people counting,

stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict

and abnormal behavior of fan, cybersecurity exception

30) Alarm Notification should be linked with Recording, snapshots, Camera external

alarm output, buzzer, logs, presets and email.

31) General AI Based Search: Search Pictures by channel, time, event type, target

classification (Fall Detection, People Approach Detection, People No. Exception

Detection, People Staying Detection, Violence Detection.

32) Smart playback function: Should support smart search for the selected area in

the video and smart playback to improve the playback efficienc

33) VCA (Video Content Analytic): Should support multiple video contented analytics

based on camera analytics

34) Analytics by NVR: Perimeter protection and face recognation

40.11.1 32 Channel Network Video Recorder (NVR) having display split :- Main screen:

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

IP based CCTV System Carried over to Summary 5 63 618 28 475

Digitally signed by JAYA

ELECTRICAL WORKS

S.No. DESCRIPTION OF ITEM QUANTITY TOTAL UNIT

NSR DSR NSR DSR NSR

Digitally signed by JAYA

Estimate For HVAC Work

Proposed -Phase –II Infrastructure Development works of the Permanent Campus of Indian

Institute of Management Sambalpur, Odisha

DETAILED ESTIMATE FOR DOUBLE OCCUPANCY GIRLS HOSTEL - HVAC WORK

S.NO DSR-2025 / DESCRIPTION UNIT AMOUNT (INR)

1) Sub Head 'A' - Machinery INR 5348188 1417274

2) Sub Head 'B' - Refrigerant & Drain Piping INR 621964 151310

3) Sub Head 'C' - Ducting & Grilles INR 298595 231851

4) Sub Head 'D' - HVAC Electric Work INR 0 1455772

Total Estimated Cost INR 6268747 3256207

ADD EXTRA GST ON DSR 0 0

TOTAL INCLUDING LABOUR CESS 6268747 3256207

SUB TOTAL (DSR+NSR) FOR ONE BLOCK 95,24,954

GRAND TOTAL (DSR+NSR) FOR 3 NOS. OF BLOCK 2,85,74,862

GRAND TOTAL (DSR+NSR) FOR 3 NOS. OF BLOCK 2,85,74,862

Design Centre Consulting Engineers Pvt. Ltd., Vaishali, NCR Delhi, Ph-0120-4333451, 4333452 1 JAYA

Digitally signed by

Proposed -Phase –II Infrastructure Development works of the Permanent Campus

of Indian Institute of Management Sambalpur, Odisha

DETAILED ESTIMATE FOR ONE BLOCK OF DOUBLE OCCUPANCY GIRLS HOSTEL - HVAC WORK

S.NO DSR-2025 / DESCRIPTION UNIT RATE (INR) AMOUNT (INR)

NSR QYT. DSR NSR DSR NSR

Sub Head 'A'- Machinery

1) Variable Refrigerant Volume / Flow Air-conditioning System

Supply, Instalaltion, testing and commissioning of Variable Refrigerant

Flow /Volume (VRF/VRV) (with the latest technology/version) with All-

Inverter driven Compressor, modular type airconditioning system

with stepless modulation for both heating & cooling modes, complete

with indoor and outdoor units, individual remote controller and

centralized controller, interconnected refrigerant piping with insulation,

Y joints, full charge of refrigerant gas including additional top up and

oil, control cabling etc. as per detail given in specifications and having

following items. The prices to be given in Indian rupees including

all taxes and duties and delievered at site. Refrigerant to be used

shall be - R 410 A only.

It shall be complete as per specifications,with connectivity to

automation for A/M status, RUN status & Remote start/stop

command.(Bacnet/IP) with multi connection kits for each outdoor unit

& First charge of refrigerant gas for the VRF/VRV Units & required

MS frame work or required foundation & anti vibration pads for

mounting the outdoor units. installation, testing & commissioning of air

cooled VRV/VRF system shall include pipe pressure testing &

flushing with nitrogen, charging of gas/oil etc. & will include all

lifting/shifting etc.

1.1) Air Cooled VRV / VRF Outdoor Unit

Digitally signed by JAYA

Supply, Installation, Testing & Commissioning of Modular type

Variable Refrigerant Flow/Variable Refrigerant Volume air cooled

Outdoor units suitable for cooling/heating having 100% hermetically

sealed inverter type twin Rotary/Scroll Compressor(s), minimum two

compressors (with individual seperate PCB) for above 14HP modules,

microprocessor based Controller, top discharge type condensing

unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with

suitable foundation etc. complete as required. To have better

efficiency condensor fan shall be capable to operate at different

speed with respect to load. The unit shall deliver the rated capacity

and in confirmation as per IS 18728:2024 and CPWD Specifications

and work even at 50°C ambient temperature without tripping.

The system shall be able to deliver 100% of the rated capacity upto

39 Degree Celcius. The unit shall be suitable to work on 400V +/-

10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit

shall be filled with first charge of the refrigerant and ready for use as

required. The condenser should be coated with a hydrophilic film to

prevent water accumulation on the surface of the heat exchanger,

enhance water dispersion, and reduce the risk of degradation, thereby

improving overall performance and durability. The Indian Seasonal

Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy

Conservation and Sustainable Building Code (ECSBC) 2024 as below

and complete as per CPWD specification, connections, inter

connections etc. as required. (For capacity <40 kWr ISEER 7.4,

Capacity >40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super

ECSBC Building)

1.1.1) DSR-2025 14 HP Cool / Heat Pump Unit Nos. 1 303226 303226 0

1.1.2) DSR-2025 30 HP (12 HP+18 HP) Cool / Heat Pump Unit Nos. 3 662994 1988982 0

1.1.3) DSR-2025 32 HP (14 HP+18 HP) Cool / Heat Pump Unit Nos. 1 693088 693088 0

2) Indoor Units

Digitally signed by JAYA

Supply, Instalaltion, testing and commissioning of Indoor units

equipped with pre-filter, fan section with suitable static fan to

distribute the air as per approved shop drawings, multispeed motor,

coil section with DX coil, outer cabinet / cassette panel, drain

pan, insulation, pipe connections etc. of various capacities as per

specifications and drawings.

2.1 DSR-31.8 VRV Hi Wall Unit - Supply, Installation, Testing and Commissioning

of following minimum capacity High wall type Indoor unit equipped

with and comfort washable synthetic media pre-filter, fan section with

low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc.,

suitable for operation on 230 V ± 10%, 50 Hz, single phase AC

supply, complete as required. The Indoor units must shut down upon

receiving a singal from the BMS System/Fire Singnals. The system

shall be capable to adjust air flow as per room requirement

automatically. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

(Make will be same as of Outdoor)

2.1.1 31.8.1 0.6 TR VRV Hi-wall Unit Nos. 0 16790 0 0

2.1.2 31.8.2 0.8 TR VRV Hi-wall Unit Nos. 0 17276 0 0

2.1.3 31.8.3 1.0 TR VRV Hi-wall Unit Nos. 0 17816 0 0

Sub Head 'A'- Machinery

2.2) DSR-31.13 Y-joints For Indoor Unit

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints.

Joints shall be of same Original Equipment Manufacturer (OEM)

make as of ODUs and IDUs

Digitally signed by JAYA

2.2.2 DSR-31.13.2 Outdoor Multi Joint 4 8098 32392 0

Sub Head 'A'- Machinery

2.3) Self Diagnostic Type Individual Remote Controllers (Corded

NSR Supply, Installation, Testing & Commissioning of Corded Wall SET 72 4721 339912

Mounted Type Self Diagnostic Type Digital Programmable Individual

Remote Controllers of latest generation for setting required

temperature for various Indoor Unit.

2.4) Self Diagnostic Type Individual Remote Controllers (Cordless

NSR Supply, Installation, Testing & Commissioning of Cordless Type Self SET 9 3230 29070

Diagnostic Type Digital Programmable Individual Remote Controllers

of latest generation for setting required temperature for various Indoor

2.5) Main Intelligent Programmable Central Controller (Corded Type)

NSR Supply, installation, testing and commissioning of Main centralized SET 6 118514 711084

controller / manager digital type of latest generation for VRV/VRF

system for controlling all the indoor & outdoor units installed in

building with adapters (for connecting additional indoor units, cost for

the same is deemed to be included in this item) with On / Off, touch

screen and Temparature Controls, fan speed, scheduling, air flow

direction setting, operation history etc. The controller should be

compatible with automation system (Bacnet/IP) with all accessories. It

should be complete as per manufacturing standards & as per

directions of Engineer-in-charge.

Sub Head 'A'- Machinery

3) Accoustically Insulated Box Type Inline Fans

Digitally signed by JAYA

Supplying, installing, testing and commissioning of INLINE FANS

suitable for installing in any position in vertical or horizontal ducts. The

casing shall be double skin, internally acoustically lined and

constructed of galvanised steel. with efficient motor, fire retardent

double layer canvass connection etc complete in all respect & of

following capacities. The casing shall be selected for lower noise

level. Fan motor shall have inbuilt speed controller.

3.1) NSR 600 CFM (15mm static pressure, single phase) Nos. 11 13976 153736

4) Plastic Propeller Fans

Supplying, installing, testing and commissioning of direct driven

PROPELLER FANS. Each fan shall be complete with permanent split

capacitor or shaded pole motor, mounting plate with light weight type

PVC impellers with aerofoil contours for high efficiency & low noise &

gravity louvers for weather protection as required. Fan selection

arrangement and Electrical characteristics shall be as follows :

4.1) NSR Up to 125 CFM, 6 Inch Dia, 3 mm St. Pr., Single Phase No. 3 1980 5940

4.2) NSR Above 125 CFM and Up to 250 CFM, 8 Inch Dia, 3 mm St. Pr., Single Nos. 1 2640 2640

4.3) NSR Above 250 CFM and Up to 500 CFM, 10 Inch Dia, 3 mm St. Pr., Nos. 11 3300 36300

5) GI Propeller Fans

Supplying, installing, testing and commissioning of direct driven

PROPELLER FANS. Each fan shall be complete with permanent split

capacitor or shaded pole motor, mounting plate with light weight type

GI impellers with aerofoil contours for high efficiency & low noise &

gravity louvers for weather protection as required. Fan capacity shall

be as follows :

5.1) NSR 750 CFM, 300 mm Dia, 3 mm St. Pr., 900 RPM, Single Phase No. 0 4620 0

Sub Head 'A'- Machinery

Digitally signed by JAYA

6) Axial Flow Fan

Supply, installation, testing and commissioning of ceiling mounted

Tube Axial flow fans with adjustable pitch blade, MS / GI long casing

(2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm

dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller

complete with TEFC Sq. Cage Induction motor IE-3 suitable for

415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with

support, mountings, vibration isolators, fire retardant flexible canvass

connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet

& Outlet as required) etc. & of following capacity. The complete fan

along with motor shall be high efficient one with fire rated (class H)

suitable for withstanding 250 ° C temperature rated for 2 hours. Fan

outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan

motor KW given below are for guideline & actual Dia / KW shall be as

per manufacturer selection based on maximum 16 m/sec outlet

Axial Fan shall be AMCA certified for Air and Sound performance in

accordance to AMCA 210 and AMCA 300. Complete Fan shall be

tested and approved by CE / UL / EN in accordance with "Power

Ventilators for Smoke Control Systems" for 250 ° C for 2 hours.

Manufacturer shall furnish AMCA Test Certificate for air & sound

performance along with UL / EN fire test certificate (Latest) for each

fan sourced from that particular factory. The noise level of axial fan

shall be less than 80 dBa at a distance of 3.0 mt from the fan. The fan

shall be low RPM (less than or equal to 1000 RPM) and capacities

shall be as follows. Wattage of motor shall be as per actual selection

meeting other technical parameters

6.1) NSR 7000 CFM (25mm static pressure, Axial Fan, 960 / 1450 RPM, 2.2 Kw Nos. 2 69296 138592

Fan Motor or as required, 600 MM Fan Dia)

7) 32.2 Hi-wall Split Unit (5 Star Rated) For Various Areas as per basis of

design, UPS, Fire Control Room, CCTV Room, Hub Room etc.

Digitally signed by JAYA

Supplying , Installation, Testing and Commissioning of Air

Cooled Hi Wall split type Air conditioners complete with

Indoor unit(IDU), Out door unit (ODU), surface / concealed

copper Refrigerant piping with insulation (closed cell

elastomeric nitrile rubber tubular pipe section) upto 3 Mtr

(IDU to ODU), copper power cable upto 3.5 Mtr (IDU to

ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant,

wireless Remote control, suitable for working between 180-

260V with low & high voltage cutoff and 50 hz ,1 phase AC

supply capable of performing cooling, dehumidification, air

circulation of following capacity with Scroll / rotary

compressor. The system shall be able to deliver 100% of

the rated capacity upto 42 0C. Min 5 year Original Equipment

Manufacturer (OEM) warranty both compressor

and Printed Circuit Board (PCB). Must comply : Electrical

cable IS 694 or IS 9968 temperature sensing control IS

/International Electrotechnical Commission (IEC) 60730,

hermetic compressor IS 10617, heat exchanger IS 11329,

capacitor IS 2993 and motor IS 12615. Complete as per

CPWD specification and IS : 1391 Part II 2023. The system

shall be able to operate up to 50 0C (out door ambient

7.1) .75 TR, Inverter Type - Cooling only with 5 Star BEE Rating NO 0 39095 0 0

7.2) 1.0 TR, Inverter Type - Cooling only with 5 Star BEE Rating NO 0 40580 0 0

7.3) 1.5 TR, Inverter Type - Cooling only with 5 Star BEE Rating NO 2 43539 87078 0

7.4) 2.0 TR, Inverter Type - Cooling only with 5 Star BEE Rating NO 2 57396 114792 0

Total of Sub Head 'A'- Machinery Carried to Summary of Prices. 5348188.0 1417274.0

Sub Head 'B' - HVAC Plumbing

1) Condensate Drain Piping With Nitrile Rubber Insulation

Digitally signed by JAYA

Supply, installation, testing and commissioning of UPVC condensate

drain water piping of density 10 Kg/m ³ complete with fittings like

elbows, tees, reducers, bends, flanges, supports & duly insulated

with "O" class Closed Cell Elastomeric Nitrile Rubber of specified

pipe section of specified thickness etc. as required and of following

1.1) NSR 25 mm dia pipe, 13 mm Insulation RMT 260 310 80600

1.2) NSR 32 mm dia pipe , 13 mm Insulation RMT 50 339 16950

1.3) NSR 40 mm dia pipe , 13 mm Insulation RMT 140 384 53760

1.4) NSR 50 mm dia pipe , 13 mm Insulation RMT 0 516 0

2) DSR -31.14 Insulated Refrigerant Piping for VRV / VRF System

Supplying, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal

sizes of soft/hard drawn copper refrigerant piping for

VRV/VRF system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular

insulation/with Class-O closed cell elastometric nitrile

rubber tubular sleeves sections of 19 mm thick insulation

as given below for Suction and Liquid lines, all accessories

as per specifications etc. as required

2.1) DSR -31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm RMT 260 256 66560

thick insulation

2.2) DSR -31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm RMT 260 346 89960

thick insulation

2.3) DSR -31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 RMT 280 487 136360

mm thick insulation

2.4) DSR -31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 RMT 80 615 49200

mm thick insulation

2.5) DSR -31.14.5 19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 RMT 140 739 103460

mm thick insulation

Digitally signed by JAYA

2.6) DSR -31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 RMT 70 904 63280

mm thick insulation

2.7) DSR -31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 RMT 0 1068 0

mm thick insulation

2.8) DSR -31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with RMT 60 1157 69420

19 mm thick insulation

2.9) DSR -31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 RMT 0 1222 0

mm thick insulation

2.10) DSR -31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 RMT 34 1286 43724

mm thick insulation

2.11) DSR -31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 RMT 0 1322 0

mm thick insulation

2.12) DSR -31.14.12 41.3 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 RMT 0 1368 0

mm thick insulation

Total of Sub Head 'B'-HVAC Plumbing carried to Summary of 621964.0 151310.0

Sub Head 'C' - Ducting & Grilles

1) 30.12.1 Rectangular GI Ducting (Factory Made - L Shape)

Supply, installation, balancing and commissioning of factory

fabricated GSS sheet metal rectangular/round ducting complete with

neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

1.1) 30.12.1.1 24 G, Thickness 0.63 mm sheet (Up To 750 mm) Sqmt. 170 1191 202470

1.3) 30.12.1.3 20 G, Thickness 1.0 mm sheet (1501 to 2250 mm) Sqmt. 0 1488 0

Digitally signed by JAYA

1.4) 30.12.1.4 18 G, Thickness 0.80 mm sheet (Above 2250 mm) Sqmt. 0 2013 0

2) 30.12.2 Site Fabricated GI Ducting

Supply, installation, balancing and commissioning of site fabricated

GSS sheet metal rectangular/round ducting complete with neoprene

rubber gaskets, elbows, splitter dampers, vanes, hangers, supports

etc. as per approved drawings and specifications of following sheet

thickness complete as required.

2.1) 30.12.2.1 24 G, Thickness 0.63 mm sheet (Up To 750 mm) Sqmt. 30 1213 36390

2.2) 30.12.2.1 22 G, Thickness 0.80 mm sheet (751 to 1500 mm) Sqmt. 0 1415 0

2.3) 30.12.2.1 20 G, Thickness 1.0 mm sheet (1501 to 2250 mm) Sqmt. 0 1851 0

2.4) 30.12.2.1 18 G, Thickness 0.80 mm sheet (Above 2250 mm) Sqmt. 0 2063 0

4) Duct Accoustic Lining

30.21 Supplying and fixing of acoustic lining of supply air Sqmt. 0 890 0

duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm

GI section of 1.25 mm thick, at 600 mm centre to centre covered with

Reinforced Plastic tissue paper

and 0.5 mm thick perforated aluminium sheet fixed to

inside surface of ducts with cadmium plated nuts,

bolts, stick pins, CPRX compound in confirmation to

SMACNA/IS and as per specifications complete etc.

5) 30.23 Duct Insulation

Supplying and fixing of following thickness duly laminated aluminum

foil of mat finish closed cell Elastomeric EPDM Rubber insulation on

existing duct, Density 40-60 kg /cum , Class A as per ASTM E 84 ,

Class V-0 as per UL 94 and Mu value > 7000, tape & adhesive

(pidilite SR -998) etc or Nitrile Rubber with ASTM E84 complies. The

joints shall be sealed with 50 mm wide and 3 mm thick self adhesive

EPDM rubber tape insulation complete as per specifications and as

Digitally signed by JAYA

Sub Head 'C' - Ducting & Grilles

7) Grilles, Diffusers, VCD

Supply, installtion and testing of Powder coated Aluminium

extruded grills / diffusers as per specifications given in tender

and of following sizes.

7.1) 30.15 Supplying & fixing of powder coated extruded aluminium Supply Air Sqmt. 0 9623 0

Grills with aluminium volume control dampers as per specifications.

7.2) 30.16 Supplying & fixing of powder coated extruded aluminium Return Air Sqmt. 5 6285 31425

Grills with louvers without volume control dampers complete as

7.3) 30.17 Supplying, fixing testing commissioning of supply air diffusers of Sqmt. 0 12841 0

powder coated aluminium with aluminium volume control dampers

with anti smudge ring & removable core.

7.4) 30.18 Supplying, fixing testing commissioning of Return air diffusers of Sqmt. 0 8595 0

powder coated aluminium without volume control dampers with anti

smudge ring & removable core.

7.5) NSR Supplying, fixing testing commissioning of Fresh / Exhaust air louvers Sqmt. 2 9783 19566

with bird screen & damper

7.6) NSR Supplying, fixing testing commissioning of Volume control GI Sqmt. 5 4612 23060

Dampers to be provided in Supply / Exhaust air registers / terminals.

Sub Head 'C' - Ducting & Grilles

8) 30.13 GSS Duct Damper

Digitally signed by JAYA

Supply, installation and testing of multiblade box type Galvanized SMT 1 7580 7580

Sheet Steel construction damper for ducts to be provided with

suitable links and quadrants for control of volume of air.

9) NSR Under Deck Insulation of Exposed Roof

Supplying and fixing of thermal insulation on exposed roof

(underdeck) with EPDM Rubber foam with completely closed cell

structure as per specifications - Density 40-60 kg /cum , Class A as

per ASTM E 84 , Class V-0 as per UL 94 and Mu value > 7000 or

Nitrile Rubber with ASTM E84 complies, tape & adhesive (pidilite SR

-998) as required & finally fixed with the help of rawl plug & dash

fasteners in ceiling.

Total of Sub Head 'C'-Ducting & Grilles carried to Summary of 298595.0 231851.0

Sub Head 'D' - HVAC Electric Work

1) NSR Electrical Sub Panel

Supply, installation, testing and commissioning of cubical floor / wall

mounted type switch board as detailed below & switch gears suitable

for AC-23 duty with digital energy meter on incoming feeders of all

Sub-Panels covered under this Item, including making interconnection

etc as required. BMS compitable dual source energy meter with

maximum demand shall be taken in main incomer of HVAC Panels.

1.1) NSR Isolator Switch With Metal Enclosure For ODU (IP-65) No. 5 8580 42900

40 A 4 pole RCBO for VRV Outdoor Units with sheet metal enclosure,

rain protection etc. as required to suit the site condition.

1.2) NSR Isolator Switch With Metal Enclosure For ODU (IP-65) No. 4 9899 39596

Digitally signed by JAYA

63 A 4 pole RCBO for VRV Outdoor Units with sheet metal enclosure,

rain protection etc. as required to suit the site condition.

1.3) NSR AHU & Axial Fan Motor Up to 3.7 KW No. 2 24947 49894

40 A TPN MCB with 16 A DOL starter, overload relay, start /

stop push buttons, phase indication lights with protection fuse, on / off

/ trip indication lights with protection fuse, single phase preventer &

auto / manual mode selector switch. Set - 01

Controls & interlocking accessories as required. Lot

'D' - HVAC Electric Work

2) NSR Single Phase MCB for VRV Indoor Units / Inline Fan / Propeller

Supply, Installation, Testing & Commissioning of suitable size PVC / Set 107 1254 134178

G.I. Box with 6A / 10A / 16A SP MCB, loop in loop out connector and

box cover etc as required at site.

3) NSR Starter for Propeller / Inline fan (Single Phase)

Supply, Installation, Testing & Commissioning of modular type single Set 26 1214 31564

phase motor starter up to 6 A / 10 A / 16 A (Rating shall be as per

motor) including suitable size G.I. Box with modular, modular cover

plate, conduiting and wiring from starter to fan etc as required at site.

4) NSR Power & Control Cabling

Supply, laying, testing and commissioning of power and control

cabling as per specification given in the tender. Power cabling of

XLPE insulated Aluminium / Copper conductor armoured cables

of 1.1 KV Grade including cable end termination with brass

compression glands & aluminium lugs etc as per specification.

Note:- Copper cable upto 16 Sq. mm & above shall be Aluminium

4.1) NSR For Motor Up to 3.73 Kw

Digitally signed by JAYA

1 x 3C x 4 Sq. mm Copper RMT 30 388 11640

4.2) NSR For Motor of 5.5 Kw

1 x 3C x 6 Sq. mm Copper RMT 0 541 0

4.3) NSR For Motor of 7.5 / 9.3 / 11 Kw

2 x 3C x 6 Sq. mm (Rate for Single Run) Copper RMT 0 541 0

4.4) NSR For VRV ODU Unit (From AC Panel to Isolators near ODU)

4.4.1) NSR 1 x 4C x 10 Sq. mm Copper RMT 150 874 131100

4.4.2) NSR 1 x 4C x 16 Sq. mm Copper RMT 100 1252 125200

4.4.3) NSR 1 x 4C x 25 Sq. mm Aluminium RMT 50 402 20100

4.5) NSR For VRV Outdoor / HW ODU (From Isolators to Unit)

4.5.1) NSR 1 x 4C x 4.0 Sq. mm Copper Flexible Cable RMT 125 293 36625

4.5.2) NSR 1 x 4C x 6.0 Sq. mm Copper Flexible Cable RMT 50 428 21400

4.5.3) NSR 1 x 4C x 10.0 Sq. mm Copper Flexible Cable RMT 30 732 21960

Sub Head 'D' - HVAC Electric Work

4.6) NSR For VRV Indoor Unit Inline Fan / Propeller Fan (From MCB to