Ireps

Active

Works

"S&T work for Interlocking of 28 Nos Non-Interlocked LC gates having TVU >20000 and < 50000 over Firozpur Division". List of LC-Gates:- ASR-KEMK Section 1 LC Gate (C-13), ASR-PTK Section 3 LC Gate (C-15,C-16,C-21), LDH-FZR Section 14 LC Gates (A-21,B1-30,A-41,B1-45,B2-49,B2-51,A-66,C-67,C-70,C-72,C-73,C-78,C-81,C- 84), JUC-FZR 2 LC Gates (C-4,C-5), BTI-FZR Section 4 LC Gates (C-45,C-51,C-56,C- 57), KKP-FKA Section 4 LC Gates (C-3,C-28,C-33,C-58).

Northern Railway

Unknown (Unspecified Location)

Amount: ₹10.9 CrCloses: 12 Oct 2026

Timeline

Published18 Sept 2026
Submission Opens28 Sept 2026
Closes12 Oct 2026

Tender Value

₹10.9 Cr

EMD Value

₹21.7 L

Closing Date

12 Oct 2026, 11:30 am

Bidding Terms

Joint Venture Allowed

Yes (up to 3 members)

Consortium Allowed

Bidding System

Two Packet System

Tender Mode

Normal Tender

Pre-Bid Conference

Pre-Bid Conference On

Not Applicable

Ranking Order

Lowest to Highest

Offer Validity

90 days

Contract Category

Expenditure

Expenditure Type

Capital (RSP)

Bidding Unit

Above/Below/Par

Tendering Section

SNT PROJEC

Eligibility Criteria

14 conditions · 3 needing a document upload

Standard Financial Criteria

1
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-I, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Document required

Special Technical Criteria

1
Any Work in connection with Signaling Installation. The work shall include indoor wiring component also if tendered work involves indoor wiring alteration in the existing system. Note 1: Tenderer may be required to submit the schedule of those works, Completion/Performance Certificates of which have been submitted by him/her in support of 30/40/60 % (as the case may be) criterion of similar nature of work.
Document required

Compliance & Declarations

31 conditions · 22 needing a document upload

Commercial-Compliance

1
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional
2
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional
3
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional

Technical-Compliances

1
Upload filled & signed Annexure-D:"Declaration regarding constitution of firm".(Copy attached with Vol-I of tender document)
Document requiredConfirmation required
2
Upload filled and signed Annexure-M:"Mandatory Certificate to be submitted by tenderer alongwith the tender documents.". (Copy attached with Vol-I of tender document).
Document requiredConfirmation required
3
Upload filled & Signed Annexure-H: Work in Hand - in support of Bid Capacity (Mandatorily for tender value more than Rs.20 crore) (copy of format available in Vol-I of Tender Document).
Document requiredConfirmation required
4
Upload filled and signed Annexure-I:Detail of Contractual Payment received in previous three financial years and the current financial year.(Copy of format available in Vol-I of tender document)
Document requiredConfirmation required
5
Upload filled & signed Annexure-J:Real Time Gross Saving (RTGS)/National Electronic Fund Transfer(NEFT) Model Mandate Form (copy of format available in Vol-I of tender document)
Document optionalConfirmation required
6
Upload filled & signed Annexure-L: Completion Certificate(copy of format available in Vol-I of tender document)
Document requiredConfirmation required
7
Upload filled & signed Annexure-N: Contractual payment received in last three years - in support of Bid Capacity (Mandatorily for tender value more than Rs. 20 crore).(Copy of format available under Vol-I of tender document)
Document requiredConfirmation required
8
Upload filled & signed Annexure-Q: Mandatory undertaking Regarding Employment/ Partnership of Retired Railway Employees.(copy of format available in Vol-I of tender document).
Document requiredConfirmation required
9
Upload filled & signed Annexure K-3 & K-4: If tender submitted on behalf of Partnership Firm, relevant Annexures K-3 and K-4 as Declaration to be submitted by the tenderer alongwith tender document.
Document optionalConfirmation required
10
Upload filled & signed Annexure-D:"Declaration regarding constitution of firm".(Copy attached with Vol-I of tender document)
Document requiredConfirmation required
11
Upload filled and signed Annexure-M:"Mandatory Certificate to be submitted by tenderer alongwith the tender documents.". (Copy attached with Vol-I of tender document).
Document requiredConfirmation required
12
Upload filled & Signed Annexure-H: Work in Hand - in support of Bid Capacity (Mandatorily for tender value more than Rs.20 crore) (copy of format available in Vol-I of Tender Document).
Document requiredConfirmation required
13
Upload filled and signed Annexure-I:Detail of Contractual Payment received in previous three financial years and the current financial year.(Copy of format available in Vol-I of tender document)
Document requiredConfirmation required
14
Upload filled & signed Annexure-J:Real Time Gross Saving (RTGS)/National Electronic Fund Transfer(NEFT) Model Mandate Form (copy of format available in Vol-I of tender document)
Document optionalConfirmation required
15
Upload filled & signed Annexure-L: Completion Certificate(copy of format available in Vol-I of tender document)
Document requiredConfirmation required
16
Upload filled & signed Annexure-N: Contractual payment received in last three years - in support of Bid Capacity (Mandatorily for tender value more than Rs. 20 crore).(Copy of format available under Vol-I of tender document)
Document requiredConfirmation required
17
Upload filled & signed Annexure-Q: Mandatory undertaking Regarding Employment/ Partnership of Retired Railway Employees.(copy of format available in Vol-I of tender document).
Document requiredConfirmation required
18
Upload filled & signed Annexure K-3 & K-4: If tender submitted on behalf of Partnership Firm, relevant Annexures K-3 and K-4 as Declaration to be submitted by the tenderer alongwith tender document.
Document optionalConfirmation required
19
Upload filled & signed Annexure-D:"Declaration regarding constitution of firm".(Copy attached with Vol-I of tender document)
Document requiredConfirmation required
20
Upload filled & signed Annexure-D:"Declaration regarding constitution of firm".(Copy attached with Vol-I of tender document)
Document requiredConfirmation required
21
Upload filled and signed Annexure-M:"Mandatory Certificate to be submitted by tenderer alongwith the tender documents.". (Copy attached with Vol-I of tender document).
Document requiredConfirmation required
22
Upload filled & Signed Annexure-H: Work in Hand - in support of Bid Capacity (Mandatorily for tender value more than Rs.20 crore) (copy of format available in Vol-I of Tender Document).
Document requiredConfirmation required
23
Upload filled and signed Annexure-I:Detail of Contractual Payment received in previous three financial years and the current financial year.(Copy of format available in Vol-I of tender document)
Document requiredConfirmation required
24
Upload filled & signed Annexure-J:Real Time Gross Saving (RTGS)/National Electronic Fund Transfer(NEFT) Model Mandate Form (copy of format available in Vol-I of tender document)
Document optionalConfirmation required
25
Upload filled & signed Annexure-L: Completion Certificate(copy of format available in Vol-I of tender document)
Document requiredConfirmation required
26
Upload filled & signed Annexure-N: Contractual payment received in last three years - in support of Bid Capacity (Mandatorily for tender value more than Rs. 20 crore).(Copy of format available under Vol-I of tender document)
Document requiredConfirmation required
27
Upload filled & signed Annexure-Q: Mandatory undertaking Regarding Employment/ Partnership of Retired Railway Employees.(copy of format available in Vol-I of tender document).
Document requiredConfirmation required
28
Upload filled & signed Annexure K-3 & K-4: If tender submitted on behalf of Partnership Firm, relevant Annexures K-3 and K-4 as Declaration to be submitted by the tenderer alongwith tender document.
Document optionalConfirmation required

Work Description

"S&T work for Interlocking of 28 Nos Non-Interlocked LC gates having TVU >20000 and < 50000 over Firozpur Division". List of LC-Gates:- ASR-KEMK Section 1 LC Gate (C-13), ASR-PTK Section 3 LC Gate (C-15,C-16,C-21), LDH-FZR Section 14 LC Gates (A-21,B1-30,A-41,B1-45,B2-49,B2-51,A-66,C-67,C-70,C-72,C-73,C-78,C-81,C- 84), JUC-FZR 2 LC Gates (C-4,C-5), BTI-FZR Section 4 LC Gates (C-45,C-51,C-56,C- 57), KKP-FKA Section 4 LC Gates (C-3,C-28,C-33,C-58).

Tender Information

Tender ID

01-SnT-PROJ-UMB-2026-27~NR

Reference Number

01-SnT-PROJ-UMB-2026-27

Tender Type

Open

Form of Contract

Works - General

Period of Work

12 Months

Location

Unknown (Unspecified Location)

Source Website

Subscribe to view

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹21.7 L

Important Dates

Last Activity

18 Sept 2026

Published

18 Sept 2026

Submission Starts

28 Sept 2026

Bill of Quantities

127 items across 4 schedules

#	Description	Unit	Qty	Rate	Amount
		—	—	—	11,14,326.92
	Design and preparation of wiring diagram for Level-Xing MACLS on the basis of approved interlocking plan,typical circuit diagram and as per Railway practice and latest rules prescribed by the Railway and obtaining approval of the competent authority. Designing , preparation of locking table, selection table, circuit diagram,contact analysis chart, relay rack chart etc, preparation of operating & indication panel Domino type diagram, (circuit shall be designed by the contractor with the use of Q series relays on the basis of approved signal Interlocking plan and obtaining approval of Competent Authority). The operating & indication panel may have addition & alteration to an extent of 5% variation in number of Domino. Designing should be as per Railway specifications and as per latest rules prescribed by Rly. This also includes preparation of cable route plan,Cable core chart,Station working rule diagram,Power supply arrangement,Cable termination chart in relay room and location boxes,Location wiring plan,Cable insulation chart,Fuse analysis,Indoor circuit diagram,Track circuit jumper plan,Terminal and Contact analysis chart,Outdoor circuits and other outdoor diagrams and obtaining approval of the engineer as per following :-Supply of 6 copies of complete set of superior quality paper including one set laminated,properly bound in file with cushioned cover. Software backup of complete set in the form of CD (2 Nos.) One complete set of tracings Design through CAD. Drawings in A-3 size & plan in bigger size papers. (six sets). (Inspection: JE/SSE/P/D&D).	—	—	—	11,14,326.92

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

HTML

NIT Documents

nit.pdf

NIT

Work Item Documents

TENDERDOCUMENTS28LCFZR.pdf TENDER DOCUMENT

ATTACHMENT

TypicalDrawingsofLCGates.pdf

ATTACHMENT

TENDERDOCUMENTS28LCFZR.pdf

ATTACHMENT

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Description

Unit

Qty

Rate

Amount

—

11,14,326.92

Design and preparation of wiring diagram for Level-Xing MACLS on the basis of approved interlocking plan,typical circuit diagram and as per Railway practice and latest rules prescribed by the Railway and obtaining approval of the competent authority. Designing , preparation of locking table, selection table, circuit diagram,contact analysis chart, relay rack chart etc, preparation of operating & indication panel Domino type diagram, (circuit shall be designed by the contractor with the use of Q series relays on the basis of approved signal Interlocking plan and obtaining approval of Competent Authority). The operating & indication panel may have addition & alteration to an extent of 5% variation in number of Domino. Designing should be as per Railway specifications and as per latest rules prescribed by Rly. This also includes preparation of cable route plan,Cable core chart,Station working rule diagram,Power supply arrangement,Cable termination chart in relay room and location boxes,Location wiring plan,Cable insulation chart,Fuse analysis,Indoor circuit diagram,Track circuit jumper plan,Terminal and Contact analysis chart,Outdoor circuits and other outdoor diagrams and obtaining approval of the engineer as per following :-Supply of 6 copies of complete set of superior quality paper including one set laminated,properly bound in file with cushioned cover. Software backup of complete set in the form of CD (2 Nos.) One complete set of tracings Design through CAD. Drawings in A-3 size & plan in bigger size papers. (six sets). (Inspection: JE/SSE/P/D&D).

—

11,14,326.92