REPAIRS TO ROAD, POTHOLES, PAVER BLOCKS, ROAD MARKING AND ROAD FURNITURE UNDER AGE BR I AT NAVAL BASE KOCHI

Amount

M&L for preparation of black top surfaces of old bitumen road and premixed macadam surfaces by brushing with wire brush for removing caked mud etc, sweeping with brooms, and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly priming/tack coat with bituminous primer with cold emulsion @ 5Kg/10 Sqm using paving bitumen all as specified and as directed Note :- Tack coat for Item No. 2 &10 shall be measured under above item.

M&L for Bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with paving bitumen any penetration using mechanical paver with 7% bitumen replaced by shreded waste plastic conforming to LDPE,HDPE,PET,Polyurathene and all other requirement as per IRC SP98-2013 complete all as specified and as directed.

M & L for repairs to pot holes any depth n.exc 1.00 Sqm each including sweeping free dust, mud or water scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) and applying tack coat with cold emulsion @ 5Kg per 10 Sqm, putting in premixed bituminous macadam, well remmed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cu m of stone chippings . 6.3mm size and again well rammed(including supply of premixed macadam,binder and chippings) depth of potholes exc 30mm but n.exc 50mm complete all as specified and directed

S&F for road reflective studs cat's eye model 290 series made of ABS plastic of size 90mm x 107mm x 17mm dynamically designed to with stand very highy impact strength and fitted with 2Nos highly reflective reflector complete all as specified fixed as per manufacturer's instructions and as directed .

M & L for preparing the surface, providing and laying hot applied thermoplastic compound 2.50 mm thick including reflectrorizing glass beads @ 250gm/sqm ,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35-1997 by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass bead dispenser, propane tank heater and profile shoe driven by experienced operator on road surface complete , all as specified and as directed. Note :- The finished surface shall be level,uniform and free from streaks and holes.

M & L for painting lines,dashes,arrows,letters etc on roads pavements and the like not exceeding 10 cm wide with road marking paint any colour as approved by GE etc complete all as specified and and as directed

Dismantling unserviceable precast cement Concretetiles of any description and thickness,from any position, removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M&L for prviding and levelling in layers stone chippings of size 12.5mm to 4.75mm, as in cushion for paver block ,laid to level and compacted to required gradient all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and as directed.

M&L for premix bitumineous macadam laid ,rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less),using paving bitumen any pentration complete all as specified and as directed.

M/s Reena Constructions

Albert Rebello and Company

ARANCO INFRASTRUCTURE