Providing water supply scheme for new Jail at Bashing in Tehsil and District Kullu H.P.

Amount

Cutting in earth work in all kind of soil in all leads and lifts such as spade work,Pick work, jumper work, saturated/unsaturated soil blasting work in soft /hard rock,chiselling/wedging out rocks, where blasting is prohibited in all leads and lifts stacking the usefull material available from cutting work and handing over the usefull material to the department free of cost as per direction of the Engineer-in-Charge with in all leads and lifts.

Execavation in foundations trenches etc. in earth work lift upto 1.50 mtr. Stacking the excavated soil not more than 3 mtr. Clear from the edge of excavation & then returning the stacked soil in 15 cm layers, when required in to plinth side of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of allsurplus excavated earth as directed withen a lead of 20 mtrs. in pick and jumper work.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate of 40 mm nominal size) with 15 % plum and curing complete excluding cost of form work in reataining walls/ breast walls, the size of plums shall usually be 150 mm to 300 mm as per HPPWD specificationscomplete in all respects.

Providing and laying cement concrete 1:3:6 ( 1 cement:3 sand:6 graded stone aggregate 40 mm nominal size )and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1½:3 ( 1 cement :1½ sand :3 graded stone aggregate 20 mm nominal size ) and curring complete excluding cost of form work in foundation and plinth in all heights and depths with in all leads lifts and to the entire satisfaction of Engineer incharge.

Foundation and plinth with in all heights and depths includiing all leads lifts and to the entire satisfaction of Engineer incharge.

Providing and laying tor steel reinforcement for RCC work including bending binding and placeing in position complete upto floor two level with in all leads and lifts and to the entire satisfaction of Engineer Incharge including cost of binding wires.

Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65mm Dia inlet over flow and scour pipe and 80mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. ROOF SPECIFICATION Roof Type :- Self Supported Dome Type Bulk Density Kg/Cum. :- 1000Kg/m^3 Sesmic Zone :- Zone IV Roof Angle :- 8 Degree Wind Speed :- 180km / Hr Roof Structure :- Hot Dipped Galvanized TECHNICAL SPECIFICATIONS OF SHEET Wall Sheet Yield Strength :- 300MPA Wall Sheet Tensile Strength :- 340 MPA Elongation :- 18% Sheet Corrugation Space :- 75mm Depth :- 18mm Thickness :- 0.8mm Each Corrugated Sheet Make of Sheet :- TATA Bluescope Sheet Galvanize Coating :- Zinc Alume ZA 150 MOC of Sheet :- Zincalume TECHNICAL SPECIFICATION OF LINER Weight / Sqm. (GSM) :- 760 gsm Anti-Algae Stabilized :- Yes Both Side PVC Food Grade :- Yes Thickness (mm) :- 0.8mm Water Proofness :- 200 PSI Standred Colour :- Grey Base Febric :- High Teenacity Polyster Filament Yarn Temprature :- -10 to +60 Degree Celcius PH Range :- 3 to 13 Tested :- 2Kg/cm2 for any leaks

Mukul Bhopal

Narender Singh

KIMAT RAM

Chitar Singh

MAA KAMAKHYA BLESSINGS

DESH RAJ VERMA