Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC EKTA ENCLAVE PHASE 1 SEWLA KALAN CHANDERBANI ROAD DEHRADUN U K PIN 248171 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248171 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹27.3 L+₹2.3 L (9.38%)Rejected-Finance 21 NEAR LAL KOTHI CHANDER NAGAR SAHARANPUR UP 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹27.6 L+₹2.7 L (10.7%)Rejected-Finance DEHRADUN | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹28.9 L+₹3.9 L (15.8%)Rejected-Finance 95 A GOVIND NAGAR RACE COURSE OPP GURUDWARA DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹33.0 L+₹8.0 L (32.2%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
COMPREHENSIVE MAINT FOR OTM ACCN INCLUDING OTHER CONNECTED ITEMS UNDER GE CLEMENT TOWN, DEHRADUN
2023_MES_630503_1
GE /CLT / of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class D Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE Clement Town
₹80,000
Yes
13 Jan 2024
30 Nov 2023
4 Jan 2024
30 Nov 2023
28 Dec 2023
14 Dec 2023
Amount
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in any position n.exc 15cm thick (above or below GL) complete all as specified and directed.
M&L 40mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for cement concrete 1:3:6 type C2 , 75mm thick using 40mm graded stone aggregate over rammed earth as in hard standing /plinth protection finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engineer-in-charge.
Demolition of reinforced Concrete of any description ( with including provision of cutting of reinforcement to fecilitate demolition) in any position not otherwise specifically provided for all as specified
M & L for providing reinforced cement concrete nominal mix 1:1.5:3 B-1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.
M & L for providing reinforced cement concrete nominal mix 1:1.5:3 B-1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
S & F Framed work Fe-290(Gde E?165) as in doors orgates, grating of drain covers angle for security post,truss or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S & F Framed work Fe-290(Gde E?165) as in ornamental design for doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F Plain, black mild steel sheeting thickness 3mm welded,cut to shape with laser cut design as per Engineer in charge as in doors complete all as specified and direted
Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with screw
Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c
Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board, 12mm thick, of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre-to-centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish, with and including provision of necessary frame work as in false ceiling,two coat of distemper over a coat of alkali based primer and a coat of putty making even and smooth surface complete all as specified and directed.
Plaster of Paris (POP) (Gypsum Anhydrous) cornices in any design as approved, of 125mm x 75mm size, fixed with screws to walls and ceiling at junction of wall and ceiling, complete all as specified and directed.
S & F 12mm thick wave free toughened clear glass as in doors and partitions with stainless steel spider fitting, fish mouth channel in bottom and top as required with and including provision of all other neccessary fixture,sun control film and accesaries, complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non skid Endura coloured tiles 8-10mm thick (square/rectangular) grade-4, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.
M&L 100mm thick PCC (1:2:4) type B-2 (Using 40mm graded stone aggregate) as in hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.
Dismantling Old paver Blocks any size.
M&L for Machine pressed precast concrete glossy finish interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness M-40 grade with grey cement and pigment complete all as specified and directed by Engineer-in-charge.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engineer-in-charge.
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed...
Returing, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, in any type of soil complete all as specified and directed.
Removing excavated material ( surplus soil) to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specifed and directed.
M & L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and directed.
M&L PCC 1:2:4 type B0(Using 12.5 mm graded aggregate) as in Coping similar work complete all as specified and as directed.
M & L TMT bars 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
M & L TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed complete all as specified and directed..
M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface, square or rectangular of concrete complete all as specified and directed complete all as specified and directed..
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty on walls complete all as specified and directed
M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.
M&L applying 2 coats of Exterior emulsion Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm on wall of new plaster surface including cornices, plasters etc all as specified and directed.
S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site. complete all as specified and directed.
S&F in repair 15mm dia gun metal gate valve with iron wheel headed, screwed both ends to iron pipe complete all as specified and directed.
S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed.
Taking up or down 20mm dia bore steel/CPVC tubing and connections including cleaning for re-fixing or removal from site
Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.
Taking up or down 25 mm dia bore steel tubing and connections including cleaning for refixing or removal from site
Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.
S&F CPVC 25mm outer dia gate valve complete all as specified.
S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.
M & L for preparation of road surfaces and applying thermoplastic reflective paint for marking of minimum 2mm thick single coat as in center line and edge line zebra crossing, stop lines etc, road marking of 150/100mm width using "HOT Mark" thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium diaxide, calcium carbonate, inter filler etc, thermoplastic requirement for glass beads shall be as per the table No 8004 of most specification conforming to BS-6086 OF MOST specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacturer's instructions and as directed.
Excavating in post holes (or similar holes) any type of soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as directed.
S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S&F Concertina coil, galvanised 600mm dia, streched over barbed wire and angle post, 60 spirals/12m and 3 Nos of clips per spiral as per manufacture'sinstructions complete all as spec and directed
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n.exc 10cm long and diameter of neck 11 to 15mm.
Supply only galvanized iron chain link fencing of any size as or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type of standards,rails,straining bolts,etc including taking down old fencing provision of binding wire all as directed.
M & L 16 to 18mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including rounding of edges , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
M&L for preapration of old concrete surface or unplastered surafces on wall and applying two coats of oil bound distemper on wall surfaces over a coat of putty complete all as specified and directed by Engr-in-Charge.
M&L for preapration of old concrete surface or unplastered surafces with complete removal of existing treatment of kerb stone and the like and applying two coats of synthetic enamel paint of any tint over one coat of primer base paint complete all as specified and directed.
M&L for preparing old steel and iron surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L for preparing old wooden or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L for preapration of old plastered or unplastered surafces with complete removal of existing treatment of walls, concrete tiles,and the like and applying one coat of cement base paint complete all as specified and directed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
JBN CONSTRUCTION
Malik Associates
M/S Manmohan Singh Anand
Gupta Enterprises
ANEJA AND COMPANY
M/s RP AGRAWAL
M/s RK ENTERPRISES
SWASTIKA BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .