Supply of spares for GLF installations at C.A.Porbandar.

Amount

Supply of 200W/6.6A HIRL bi - pin halogen type lamp suitable for existing AMA make elevated type runway edge light fittings as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of Bi Pin Lamp Holder For AMA make elevated type Runway/Papi/Taxi Light Fitting (male type) as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 105 W, 6.6Amp Halogen lamp suitable for existing Inset type runway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 15 W LED lamp with driver unit suitable for existing LED type Taxiway Fitting as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of Connector Kits for 6 Sqmm Copper Conductor Cable: 5 KV Grade (ESSNA Connector)

Supply of Two Pin Secondary plug assembly for PAPI (2.5 Mtr Long)

Supply of Two Pin Secondary plug assembly for AUN, ALN and ALD Fittings (0.3 Mtr/12" long)

Supply of 200 W,6.6/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required..

Supply of 100 W,6.6/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required.

Supply of 15 W,6.6/6.6A, 5 KV , 50 Hz Isolating Transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5KV series circuit complete as per ICAO/CAR compliance and AAI specification etc complete as required..

Supply of rubber / neoprene Gasket suitable for base Plate of existing AMA make elevated type runway edge/Approach/End/Threshold fitting as per AAI specification complete as required.

Supply of outer side O Ring suitable for existing OCEM make Inset type fitting ( between fixture and base base ) as per AAI specification complete as required. (As per sample )

Supply of Air field LED signage Converter with dual input and inbuilt change over, suitable for existing signages installed at site etc as per AAI specification complete as required. (Input 2.8 A - 6.6 A series circuit Output : 35 V DC , 72 watt)

Supply of Air field LED signage Converter suitable for existing signages installed at site etc as per AAI specification complete as required. (Input 2.8 A - 6.6 A series circuit Output : 35 V DC , 72 watt)

Supply of LED Strip comprising minimum 11 nos. LEDs suitable for Airfield Guidance Signage Board all as reqd.& specified.

Supply of Base Plate with 6 sets of M-10 SS nut bolts suitable for existing AMA make elevated type Edge light/ Approach/End/Threshold fittings as per AAI specification complete as required.

Supply of Red Filter for PAPI

Supply of Base Plate for PAPI

Supply of Checking Stick Base Plate for PAPI

Supply of Aluminium Reflector for PAPI

Supply of Terminal Block(Porcelain Connector) for PAPI

Supply of GS 1000/100 high speed semiconductor protection fuse suitable for 20KW CCR

Supply of GSB 50 high speed semiconductor protection fuse suitable for 4 KW CCR

Supply of LV 3NA7 HRC Fuse link 32A suitable for 20 KW CCR (Siemens or equivalent)

Supply of LV 3NW NS4 HRC Fuse link 4 A suitable for 4 KW CCR (Siemens or equivalent)

Supply of 150 RK 160 Thyristor suitable for 20 KW CCR (as per sample)

Supply of 65 RK 160 Thyristor suitable for 4 KW CCR (as per sample)

Supply of trip indicator TI 300 (GE make or equivalent as per sample)

Supply of 240V AC Plug in type Relay Coil O/E/N 58-48-2C 1150/3300 Ohm (as per sample)

Supply of Air Brake Power Contactor suitable for NASU Make 20 KW CCR (Model no. Siemens make 3 TF47 7 or equivalent)

Supply of Contactors suitable for NASU Make 4 KW CCR ( Model No. Siemens make 3 TF34 00-0A or equivalent)

Supply of HT self bonding Electrical insulation tape roll 19 mm width x 9.15 mtr length x0.75 mm thick (3 M Scotch 23 or euivalent)

Supply of electronic driver (Model no. CE 12V-2A Wight Light or equivalent) & 3 W LED lamp suitable for LED light fitting of existing H-Indicator all as reqd.(as per sample)

Supply of Main Control CCR Cards including RMS to DC Converter Card,Power Supply + driver Card, IM Card, Over Current Trip Card, Relay Card and TTM Cards (2 nos) suitable for NASU Make 20 KW & 4 KW Conventional CCR all as required & as specified.

Supply of signage board facia sheet in 4 mm thickness, UV coated long life, alongwith desired Nomenclature and color as per ICAO.

Supply of 1x6 sqmm unarmoured 5 KV grade PVC insulated & PVC sheathed, antitermite & anti-rodent, multistranded copper conductor single core Airfield lighting cable confirming to IS 1554 (Part-II) with up to date amendments and confirming to tenders technical specifications, terms & conditions etc. complete as required.

electromach sales agencies

paras electricals

SHRI K.D.INDUSTRIES

Bafna Electric Corp

Manish Electricals