REPAIR/REPLACEMENT TO INTERNAL WIRING AND ALLIED WORKS AT JCOs/OR MD ACCN , 28 CAMP UNDER AGE E/M AT YOL CANTT.

Amount

Part-ITaking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including light fiitings any type,switches, sockets, holders, (batten or pendent type), ceiling rose, switch board , bell/buzzer,bell push, tube light fitting ,regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes and all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified.

Point wiring with 1.5 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including casing-n-caping medium grade, ISI marked of suitable size with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed pressed steel/ cast iron of suitable sizes terminal boxes made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for one light point or one fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed.

All as per serial item No '03' above, but for one light point controlled by two way switches, all as specified and directed.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the independent board, all as specified and directed.

All as per Srl item No. '03' hereinbefore but for 3 pin 15 amps socket out let on independent with 2.5 Sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.

Switch piano flush type, single pole, one way, 5/6 Amps, all as specified.

Switch piano flush type, single pole, two way, 5/6 Amps, all as specified.

Switch , bell push, flush type, 5 Amps, all as specified.

Buzzer ding dong AC 230V, single pole, all as specified.

Switch socket outlet Two -in -One 3 pin 5 amps flush type, 230 volts AC multipurpose all as specified.

Switch socket combination 5 Pin, 5 Amp & 15 Amp flush type controlled by one switch, all as specified.

Ceiling fan regulator step type, electronic type varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans, all as specified.(Makes as mentioned in Appendix 'C').

Ceiling rose, three phase, PVC/Polycarbonate, insulated body, all as specified.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings , all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, triple pole and neutral, 4 way, 415 volts with 200 Amp rated bus bar, double door with detachable gland plate, all as specified.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified.

MCB SP 6 to 32 Amp, 240 Volts, 10 KA all as specified.

MCB SPN 6 to 32 Amp, 240 Volts, 10 KA all as specified.

MCB TPN 63 Amp, 415 Volts, 50 Hz, 10 KA all as specified.

Replacement of Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 6 Sqmm and drawn into and including surface PVC casing & capping of suitable size with all fittings/ accessories, junction boxes 1 to 4 way 25mm dia and connected to common earth dolly, complete and as directed.Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 6 Sqmm, shall be measured as one RM).

Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 09 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete. Make:- Havells Cat Part No.LUMILINEBS9WLED865SPCWH or equivalent in makes mentioned in Appx 'C'.

Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 18 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete. Make:- Havells Cat Part No.LUMILINEBS18WLED865SPCWH or equivalent in makes mentioned in Appx 'C'.

Supply & Fixing lamp LED New adore 2.8Watt B22 complete. Make:- Havells Cat Part No.HLDEUEEML8R2X8 or equivalent in makes mentioned in Appx 'C'.

Switch socket combination 5 Pin, 5 Amp & 15 Amp flush type controlled by one switch, fixed in repair all as specified.

Switch socket combination outlet Two -in -One 3 pin 5 amps flush type, 250 volts AC multipurpose, fixed in repair all as specified.

Ceiling rose, three phase, PVC/Polycarbonate, insulated body, fixed in repair all as specified.

Switch piano flush type, single pole, one way, 5/6 Amps, fixed in repair , all as specified.

Socket outlet Two -in -One 3 pin 5 amps flush type, 250 volts AC multipurpose, fixed in repair all as specified.

Switch , bell push, flush type, 5 Amps, fixed in repair, all as specified.

Buzzer ding dong AC 230V, single pole, fixed in repair all as specified.

Ceiling fan regulator step type, electronic type varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans, fixed in repiar, all as specified.(Makes as mentioned in Appendix 'C').

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings fixed in repair, all as specified.

Taking down ceiling fans 1200/1400 mm sweep of any make/ Model for overhauling/servicing , and then properly cleaning and greasing of bearings after opening of the fan including re-hanging and reconnecting of fan with new flexible cord of suitable size from ceiling rose to connector , complete all as directed by Engineer-in-Charge. (Note: - Spare parts will be measured and paid separately).

Supply and fixing 2.5 Mfd capacitors for ceiling fan after removing unserviceable Make: USHA/ ASIAN/ BAJAJ /HAVELLs

Supply and replacement of ball bearing No. 6201/6201/6203, of ceiling fans of any size all as per site requirement including greasing. Make SKF/NBC.

Taking down exhaust fans of any make/model/sweep for overhauling/servicing and cleaning of dust properly and then lubricating movable parts with suitable lubricanting oiling and greasing of both end bearings after opening of the fan including re-fixing and connecting up all as directed by Engineer-in-Charge.(Note: - Spare parts will be measured and paid separately).

Supply and fixing 2.5 Mfd capacitors for exhaust fan after removing unserviceable Make: USHA/ ASIAN/ BAJAJ /HAVELLS

Supply and replacement of ball bearing, of exhaust fan of any size all as per site requirement including greasing. Make SKF/NBC.

Supply and replacement of motor suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of blade suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of plastic body suitable for exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of louvers suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of motor suitable for plastic body exhaust fan of size 300mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of blade suitable for plastic body exhaust fan of size 300mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of plastic body suitable for exhaust fan of size 300mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of louvers suitable for plastic body exhaust fan of size 300mm sweep and making necessary connection complete all as specified and as directed.

Material and labour for rewinding of ceiling fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaing agent, applying slot inslation and rewinding with super enameled insulated copper wire of same gauge / same number of turns as existing and connecting the coil suitable to operate on 230VC, single phase, AC supply including all winding, insulating material and impregnation of insulating varnish as specified of any make, type, model and applying air drying the winding throughly including transportation from site of rewinding 1200 mm sweep , complete all as specified .

Material and labor for rewinding of exhaust fans 250/300 mm sweep burnt including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaing agent, applying slot inslation and rewinding with super enameled insulated copper wire of same gauge / same number of turns as existing and connecting the coil suitable to operate on 230VC, single phase, AC supply including all winding, insulating material and impregnation of insulating varnish as specified of any make, type, model and applying air drying the winding throughly, including transportation from AGE E/M store yard to site of rewinding.

Thermostat switch for geyser, 230 Volts, 30 degree to 90 degree centigrade temprature range to be set at 70 degree to 50 degree centigrade, instant / water heater fixed in repair complete all as specified. Make: Indofose/Renutrol/Expo

Heating element any type 1.50 KW suitable for water heater (Geyser) of any type including making coneection , fixed in repair, complete all as specified.Make of Heating Element : Theta/ Hotzone/ Umpire

Indicator lamp rectangular/ round type (red/ Green) fixed in repair complete all as specified.

M&L for cleaning/scrapping of old paint/dust and painting of geysers of 25/35 ltr capacity at site/stores with two coat of super enameled painting by spray complete, all as specified and as directed by Engineer-in-Charge.

PVC insulated copper (Flexible) conductor PVC sheathed three core 2.50 sq mm, fixed in repair, complete all as specified.

S&F in replacement of defective steel inner tank of 25 Litre capacity geyser tank made out of steel sheet 2 mm thick complete, all as specified and as directed by Engineer-in-Charge.

S&F in replacement of defective steel inner tank of 35 Litre capacity geyser tank made out of steel sheet 2mm thick, complete, all as specified and as directed by Engineer-in-Charge.

Supply and fix plug top for geyser (3 pin of cap 15/16 Amp), fixed in repair, complete all as specified.

Painting of ceiling fans after due preparation of surface 1200/1400mm size complete at site with super enamel synthetic white paint by spray gun including filling cavities with filler, one coat after cleaning all dust etc and writing MES No with black paint. As as directed by Engineer-in-Charge.

Painting of exhaust fans after due preparation of surface 225/300/450mm size complete at site with super enamel synthetic white paint by spray gun including filling cavities with filler, one coat after cleaning all dust etc and writing MES No with black paint. As as directed by Engineer-in-Charge.

Taking down AC Meters, checking and repairing at site by repair/ replacing of contects, terminals and indicators, glass covers, plate screws , electronic circuits etc and re-fixing in same poistion, complete all as specified.

Earth continuty Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified.

PVC Connection, heavy duty, for hot and cold water, with brass nuts 10mm dia, 600mm long suitable for geyser, complete all as specified.

Cast iron, Air release valve 15mm bore, for geyser, fixed in repair, complete all as specified.

Fusible plug of brass, 15mm bore, suitable for geyser, fixed in repair, complete all as specified.

Brass drain plug for wash out line, suitable for geyser any capacity, fixed in repair, complete all as specified.

Taking down the geyser , any capacity, from its mounting by removing all water and electric connection and disassembling the geyser, Descaling cleaning the inner tank thoroughly and there should not be any bad taste of contamination of water, Examining the water tightness of storage tank after cleaning and brazing., making it leak proof incluing teasting pressure , Reassembling all the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and re-fixing the Geyser and making electric connection, water inlet and outlet connection and testing and checking of all the functioning of water inlet outlet valves connected with geysers, complete all as specified.

ENDURA PEARL , 25 Watt LED, 5700K, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP65 protection and impact resistance of IK07 including connecting up with twin core twisted flexible copper conductor cable with suitable size, including bracket of 40mm dia 1.20metre with clamps all as specified. Make : Havells Cat Part No. ENDURAPEARLSL15WLED757SASYTOPCMP OR equivalent in makes mentioned in Appendix 'C'.

Earthing complete with GI earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including GI wire of 4mm dia up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering making necessary zigzag holes for water spreading and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type B1 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and as directed and shown on plate No 3 of SSR Part-I 2009. Note : Earth strip beyond 7.5 mtr will be measrued and paid separately under relevant item of this schedule.

KISHAN CONTRACTOR

M/S HIM BUILDERS

surinder kumar jindal & bros.

Vishav Karma Refrigeration and Electric Work

R K BUILDERS