AMC of Supply of spare parts

Rewinding of following capacities of minor HP Monoblock burnt motors single phase/ three phase with suitable gauge of copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of termibnal plate/ minor hardware items, soldering, bolts and nuts, hylum sheet strips etc., if any and to keep motor in good condition. (Excluding GST)

- do - 2 HP Electric motor of any make.

- do - 1.50 HP Electric motor of any make.

- do - 1 HP Electric motor of any make.

- do - 0.50 HP Electric motor of any make.

Rewinding of following capacities of open well submersible burnt motors single phase/ three phase with suitable gauge of copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of termibnal plate/ minor hardware items, soldering, bolts and nuts, hylum sheet strips etc., if any and to keep motor in good condition. (Excluding GST)

- do - 20 HP Electric Motor of any make.

- do - 15 HP Electric Motor of any make.

- do - 12.5 HP Electric Motor of any make.

- do - 10 HP Electric Motor of any make.

- do - 7.5 HP Electric Motor of any make.

- do - 5.0 HP Electric Motor of any make.

- do - 3.0 HP Electric Motor of any make.

- do - 2.0 HP Electric Motor of any make.

Repairing and reconditioning of Monoblock & Jet Pump of single phase/ three phase of 0.50 HP/ 1 HP/ 1.50 HP/ 2 HP Capacities, including fixing and labour charges etc., complete. (Excluding GST)

- do - Bearing with oil seal

- do - Motor service charges

Repairing and reconditioning of open well submersible single phase/ three phase, including fixing and labour charges etc., complete. (Excluding GST)

- do - Bush changing charges 2 HP to 10 HP

- do - Bush changing charges 12.50 HP to 20 HP

- do - Thrust pad and base 2 HP to 20 HP

- do - Motor service charges

Repairs for furniture (Chairs)

Hydraulic gas lift for revovlving chairs (Excluding GST)

Chorme wheel base for revovlving chairs (Excluding GST)

Tilting mechanisum for revovlving chairs (Excluding GST)

Repairs for furniture (Cots)

Alluminium collapsable railling with 6 bars (14" X 56") (Excluding GST)

Items pertaining to painting activity

FERM Air Compressor 1.50 HP, 1,100 W, 1,042 CFM of 24 liters capacity (Excluding GST).

Supply of following spare parts for FERM Air Compressor (Excluding GST)

Pilot spray gun

1/4" Brass Tee.

1/4" Brass Adopter

1/4" Brass Nipples

1/4" Brass Ball valve

1/2" Hose clamp

Items for Repairs and maintenance

Supply of following tools/ equipment/ items of standard make and as specified by department (Excluding GST)

Bench Vice of size No:06

10" Pipe Wrench of Taparia 1272 make.

12" Pipe Wrench of Taparia 1273 make.

14" Pipe Wrench of Taparia 1274 make.

Adjustable Spanner 8" of Taparia make.

Adjustable Spanner 12" of Taparia make.

13 mm Drill Chunck with key

Grinding Machine Key.

Ring Spanner Set 6X7 to 30X32 of Tapparia make (Set of 10 Nos.)

Double Ended Spanner Set 6X7 to 30X32 of Tapparia make (Set of 10 Nos.)

Air Compressor 2 HP 100 liters capcity.

Alluminium Telescopic Ladder 9'-5" Adjustable

Hand Blower Planet Power EBC 40

8" Half Rounded file.

8" Triangular File

Multiple Purpose Wrench

Long Nose Plier of Taparia make.

M-Seal 250 grams.

Araldite 240 grams

Drilling Machine Bosch GSB 501 Make.

BOSCH Hammer Drill Machine GBH 220 Make.

Chop Saw Dewalt DW 871-IN.

Hammer 4LB Handle with grip.

Items for Repairs and maintenance

Supply of following tools/ equipment/ items of standard make and as specified by department (Excluding GST)

Cutting Plier of Taparia make 1621-8.

Measuring Tape - 5 Mtr.

Measuring Tape - 3 Mtr.

2" Flat Ball Wheel.

3/4" Stem 2" Ball Wheel

5" Castor Break Wheels

5" Castor Non-Break Wheels

Claw Hammer 3/4 LB Handle with grip.

Leather tool Apron

Pillar Industrial Drilling Machine.

Yellow Saftey Helmet

Spirit level of Taparia make.

Welding goggles Black.

Welding goggles White.

Flap Disc 100 mm 80 Grit

4" Wire Cup Brush

2" Self drilling screws (100 Nos.)

Two-in-one Screwdriver with Star Drill bit

1 1/2" PVC Plugs Packet.

3/16" X 3" Bolt Type Screws

SS Nails of all sizes

1 1/4" PT Screws (1,000 Nos.)

1 1/2" PT Screws (1,000 Nos.)

3/4" MODI Screws (500 Nos.)

2 1/2" PT Screws (100 Nos.)

Items for Repairs and maintenance

Supply of following tools/ equipment/ items of standard make and as specified by department (Excluding GST)

M10X3/8" Bolt & Nuts

1 1/4" Wooden Screws Packet (100 Nos.)

Repairs and rewinding of motors & supply of spares

Rewinding of following capacities of major HP Monoblock burnt motors single phase/ three phase with suitable gauge of copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of termibnal plate/ minor hardware items, soldering, bolts and nuts, hylum sheet strips etc., if any and to keep motor in good condition. (Excluding GST)

- do - 20 HP Electric motor of any make.

- do - 15 HP Electric motor of any make.

- do - 10 HP Electric motor of any make.

- do - 3 HP Electric motor of any make.

Replacement of following sizes of Ball bearings for single phase/ 3 phase motors. (Excluding GST)

- do - Ball bearings of SKF make No:6308

- do - Ball bearings of SKF make No:6309

- do - Ball bearings of SKF make No:6310

- do - Ball bearings of SKF make No:6312

Rewinding of following capacities of burnt submersible motors and other minor HP motors with suitable gauge insulated PVC Copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/ minor hardware items, soldering, testing of outgoing wires, bolts and nuts, painting with approved colour etc., and keep the motors in good condition. (Excluding GST)

- do - 10 HP Submersible motor of given make

- do - 7.50 HP Submersible motor of given make

- do - 5 HP Submersible motor of given make

- do - 3 HP Submersible motor of given make

- do - 2 HP Submersible motor of given make

- do - 1 HP Submersible motor of given make

- do - 0.50 HP Submersible motor of given make

Replacement of ball bearings to following submersible/ monoblock motors with necessary greasing,fittings etc. (Excluding GST)

- do - Ball bearing for 7.5 HP Motor

- do - Ball bearing for 5 HP Motor

- do - Ball bearing for 3 HP Motor

Repairing and reconditioning of Monoblock and jet pump three phase for 25 HP/ 20 HP/ 15 HP/ 12.50 HP/ 10 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc., complete. (Excluding GST)

- do - Gunmetal bush joint

- do - Flamber door mouth sleeve

- do - Bearing outer sleeves

- do - Shaft bearing, seating, welding, turning charges etc.,

- do - Front door mouth sleeve

- do - Gland bore sleeve fitting

- do - Cap Holes, body holes and threading

- do - Shaft bend removing, turning and finishing

- do - Checknut welding, threading, new checknut joint

- do - Impeller key way welding, new key way

- do - Impellor checknut welding and threading

Repairing and reconditioning of Submersible pump for 7.50/ 6 HP/ 5 HP/ 4 HP/ 3 HP/ 2 HP Capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc., complete. (Excluding GST)

- do - Guide veins

- do - Thrust bearing

- do - Thrust bearing plate

- do - Door bushes

- do - Shaft bushes

- do - Impellor gas welding, turning and finishing

- do - Stage inner bushes

- do - Shaft inner holes, threading, providing suitabel bolts fitting etc.

- do - Key rods

- do - Pump removing, cleaning, testing for complete pump set

Repairing and reconditioning of Pannel boards, starters of single phase/ three phase of Monoblock and jet pump for 0.5 HP/ 0.75 HP/ 1 HP/ 1.5 HP/ 2 HP/ 3 HP/ 5 HP/ 7.5 HP Capacities for supplying and fixing, repairing and labour charges as directed during execution etc., complete. (Excluding GST)

Repairing and reconditioning of Pannel boards, starters of three phase of Monoblock and jet pump for 10 HP/ 12.5 HP/ 15 HP/ 20 HP/ 25HP Capacities for supplying and fixing, repairing and labour charges as directed during execution etc., complete. (Excluding GST)

Replacement of Ball Bearings to 12.50 HP to 20 HP Three (3) Phase electric motors (Excluding GST)

Replacement of Ball Bearings to following Monoblock Motors with necessary greasing, fitting etc. complete. (Excluding GST)

- do - Ball Bearing for 5 HP Motor

- do - Ball Bearing for 3 HP Motor

Supply and transportation of Booster pump of 1 HP Capacity. (Excluding GST) Makes : As per list of recommended brands as Category-I.

Supply and transportation of Raw water pump of 1 HP Capacity. (Excluding GST) Makes : As per list of recommended brands as Category-I.

Supply and transportation of Raw water pump of 1.50 HP Capacity. (Excluding GST) Makes : As per list of recommended brands as Category-I.

Lifting of submersible pump set of 3 HP/ 5 HP/ 7.50 HP including GI Pipes of 50 mm dia from exsisting bore wells and re-errection of pump set in same bore well, including incidental charges etc., complete as dircted during execution. NOTE: - Rate is purely for labour component, repair/ rewinding of motors/ pumps does not come under this scope of work. (Excluding GST)

Supply of set of Carbon brushes 17 X 8 X 5 mm For Drill Generic Electric Motor (Excluding GST)

Supply of 12mm x 76mm anchor fastener thrust bolt (Excluding GST)

Supply of 4 inch cutting wheel HD Ultra-thin resin cutting wheel (T41) adopt advanced production equipment and technology, selected alumina abrasives with good self-sharpening, and adds special fiber structure as reinforcing material which has high tensile and impact resistance - Size:107X1.20X16 mm (Excluding GST)

Supply of 4 inch SS Grinding wheel of size 100 X 6 X 16 mm round shaped, max speed 80m/s and operating speed 15,300 RPM (Excluding GST)

Supply of 4" Wood circular saw blade, ECO Series (110 x 1.80/1.10 x 20 mm, 30 Teeth) (Excluding GST)

Supply of leaded acrylic sheet for radiation shielding of density: 1.60 gm/cm3 and thickness 3 mm to 5 mm (Excluding GST)

Supply of 4 mm Twist drill bit. Total length 75 mm, length from tip to flute 43 mm. HSS Long series drill for general machining applications up to x6 diameter. Ideal for deeper hole drilling or where a slightly longer reach is required. Steam tempered finish for improved wear resistance. Manufactured to DIN 340 Standards (HSS: High Speed Steel) (Excluding GST)

Supply of 5 mm Twist drill bit. Total length 86 mm, length from tip to flute 52 mm. HSS Long series drill for general machining applications up to x6 diameter. Ideal for deeper hole drilling or where a slightly longer reach is required. Steam tempered finish for improved wear resistance. Manufactured to DIN 340 standards (HSS: High Speed Steel) (Excluding GST)

Supply of 6 mm Twist drill bit. Total length 93 mm, length from tip to flute 57 mm. HSS Long series drill for general machining applications up to x6 diameter. Ideal for deeper hole drilling or where a slightly longer reach is required. Steam tempered finish for improved wear resistance. Manufactured to DIN 340 standards (HSS: High Speed Steel) (Excluding GST)

Supply of 3 mm Twist drill bit. Total length 61 mm, length from tip to flute 33 mm. HSS Long series drill for general machining applications up to x6 diameter. Ideal for deeper hole drilling or where a slightly longer reach is required. Steam tempered finish for improved wear resistance. Manufactured to DIN 340 standards (HSS: High Speed Steel) (Excluding GST)

Supply of 6 mm X 160 mm (hammer drill bit) Masonry drill bit. SDS Plus Shank; Material: Alloy steel Tip Width: 6 mm Shank; Dia: 10 mm; Flute length: ~80 mm/ 3.2 Total Length: ~160 mm/6.3. (Excluding GST)

Supply of 8 mm x 160 mm (hammer drill bit) Masonry Drill Bit. SDS Plus Shank; Material: Alloy steel Tip Width: 8 mm Shank; Dia: 10 mm; Flute Length: ~80mm/ 3.2. Total Length: ~160mm/6.3. (Excluding GST)

Supply of 1 3/4" Wooden screw packet, Flat Phillips/ Square head thread size # 8 (Excluding GST)

Supply of premium quality Godrej cuboard lock, heavy body with a superior finish, rust and corrosion proof and highly durable and sturdy. Dimensions Cms : 10.16 L X 2.54 W X 6.35 H (Excluding GST)

Supply of 30mm/ 1 1/4" Plastic/ Rubber cot bushes 1 to 5 mm thickness 36 mm height. (Excluding GST)

Supply of 40mm/ 1 1/2" Plastic/ Rubber cot bushes 1 to 5 mm thickness 36 mm height. (Excluding GST)

Supply of Godrej cupboard handles (Excluding GST)

Supply of SS Mesh 12 Holes per linear inch, 1.58 mm Aperture, 0.50 mm wire diameter, SS 308 Industry standard woven wire mesh (Excluding GST)

Supply of highly tempered steel curtain spring (Excluding GST)

Supply of 6"X1" Scaffold caster ball bearing wheels with breaks 10" to 12" height, 6" wheel dia, 1" wheel width, polyurethane wheels with galvanized bracket and dial design which makes 360 degrees. The top plate and side plate of caster is made of 5.50 mm and 5 mm premium steel, with Zinc plating, it bright and is not easy to get rusty. The steering part has adopted high carbon steel ball which may make the caster more flexible. The brake support brackets are an integral part which may ensure the stability of the caster. Capacity of wheels 200 kgs. (Excluding GST)

Supply of 6"X1" Scaffold caster ball bearing wheels without breaks 10" to 12" height, 6" wheel dia, 1" wheel width, polyurethane wheels with galvanized bracket and dial design which makes 360 degrees. The top plate and side plate of caster is made of 5.50 mm and 5 mm premium steel, with Zinc plating, it bright and is not easy to get rusty. The steering part has adopted high carbon steel ball which may make the caster more flexible. The brake support brackets are an integral part which may ensure the stability of the caster. Capacity of wheels 200 kgs. (Excluding GST)

Supply of multiple use of 4" inch swivel casters perfectly fit for workbench, cargo rack, transport cart, trolley, food service cart. Easy to use and install, works on hardwood, laminate, tile, slate and other hard floors. Heavy bearing and durable high-quality polyurethane casters. Single wheel load capacity of 300 LB. Ensure safety, smooth and silent double locking brake. The wheel and the shaft are locked at the same time, ensuring that the cargo does not move when parked. Roll quietly and smoothly, without noise when moving. Universal casters 360-degree rotation and flexible swivel plate. Convenient, smooth scrolling and easy transition heavy objects. Note: Should provide matching screws in advance when installing (Excluding GST)

Supply of 1 1/2" Square nylon bush, 40 mm inner dia. (Excluding GST)

Supply of 8" heavy-duty rubber wheels and iron bracket. Extremely durable and hard wearing. Equipped with precise ball bearings, which ensures silent using. Loading capacity per wheel: 200 kg/440 lbs. Total loading capacity: 800 kg/ 1,764 lbs. Dimensions: Wheel diameter: 200 mm/ 8"; wheel size: 8" x 2" (D x T)/ height: 9". Plate dimensions: 4" x 4.5". Swivel casters rotate 360 degrees which makes turning the mating equipment possible, 2PCS caster wheels with brake, 2 Pcs Without brake. It’s good for transporting light furniture and displays quietly and safely. Perfect replacement caster for any standard wood dolly or cart, furniture, wooden furniture, tool boxes, light machinery, suitable for use on all types of flooring such as warehouses, shops, restaurants, schools, and hospitals. (Excluding GST)

Supply of 8" to 13" computer keyboard draw channel one set (Excluding GST)

Supply of 2,300 W Chop Saw ( Cutting Machine) - This chop saw is powered by 2,300 W powerful motor. It can rotate up to 3,800 RPM. It can be used for ripping sheet metals of up to 6 mm thickness. Designed for Accuracy - The chop saw has a broader base. This base increases the stability of the power tool. You can easily cut 25 mm rebar with an accuracy of more or less than 1 mm. Adjustable Fence - The chop saw has an adjustable fence that allows you to achieve angled cuts of up to 45 degree. This enhances the operational feasibility of this power tool. Aluminium Arm-Light in weight yet robust with new designed handle and crank handle with quick lock feature on the spindle. It enable you to create accurate cuts for different profiles (round, rectangle and square) (Excluding GST)

Supply of Electric angle grinder 100 mm/ 4 inch wheel, 670 Watt, 11,000 RPM Input: 220V, AC, 50 Hz Power: 670 Watts; Wheel Diameter - 100 mm (4 inch). No Load Speed: 11,000 RPM (Excluding GST)

Supply of 1" rubber bush (Excluding GST)

Supply of 2" foam 40 density sheet mattress ensure uniform compression support while lying longer period. Suitable for semi fowler hospital or patient bed, water proof rexine cover, light weight, easy to carry over all dimension - 6.5 feet x 3 feet x 4 inch (Excluding GST)

Supply of 64 mm anchor fastener thrust bolt (Anchor sealing bolt) (Excluding GST)

Supply of heavy duty mortise lock 6/ 7 levers (IS:2209) pc (Excluding GST)

Supply of DW 40 Spray 420 ml (Excluding GST)

Supply of SR Solution (Excluding GST)

Supply of Bottom knitting (seat) for S-type chair (Excluding GST)

Supply of Top knitting (back rest) for S-type chair (Excluding GST)

TTD/ CSSR Items: -

Labour charges for Cutting of following dia. GI Pipes.

- do - 80 mm dia

- do - 65 mm dia

- do - 50 mm dia

- do - 32 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 15 mm dia

Labour charges for Threading of following GI Pipes.

- do - 80 mm dia

- do - 65 mm dia

- do - 50 mm dia

- do - 32 mm dia

- do - 25 mm dia

- do - 20 mm dia

- do - 15 mm dia

Installation, testing and commissioning of the submersible pump set with all accessories as per the standard specifications for above 60 mts and up to 120 mts including laying of GI Pipe duly providing the GI Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

Supply and fixing of PVC Bore cap suitable for 180 mm dia PVC Pipe used for bore wells including all incidental charges taxes etc., complete as directed during execution.

Supply and fixing of PVC couplings suitable for 180 mm dia PVC pipe with working pressure of 6 Kg/Sq.cm for bore wells including all incidental charges etc., complete as directed during execution.

Supply of 180 mm dia Mild steel clamp set with Bolts etc., for use in Bore wells or any other suitable purpose complete as directed during execution.

Supply and fixing in position of 150 mm dia MS Galvanized bore cover including cost and conveyance, all incidental charges etc., complete as directed during execution.

Supply of L&T Make 3 Phase Panel Board with MCB and Metal Box up to 10 HP.

Supply and fixing following Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

- do - 65 mm dia

- do - 80 mm dia

Labour charges for fixing following Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

- do - 65 mm dia

- do - 80 mm dia

Supply and fixing following Gunmetal (GM) Horizontal check (Non return) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 50 mm dia

Labour charges for fixing following Gunmetal (GM) Horizontal check (Non return) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 50 mm dia

Supply and fixing following Gunmetal (GM) Vertical check (Non return) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

Labour charges for fixing following Gunmetal (GM) Vertical check (Non return) valve as per IS - 778 Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

Supply and fixing following Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

Labour charges for fixing following Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type

- do - 15 mm dia

- do - 20 mm dia

- do - 25 mm dia

- do - 32 mm dia

- do - 50 mm dia

Supply and fixing of following Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes) 1/2" to 2" SDR 13.5 Pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

- do - 15.90 mm ODPipe - SDR 13.5

- do - 22.20 mm ODPipe - SDR 13.5

- do - 28.60 mm ODPipe - SDR 13.5

- do - 34.90 mm ODPipe - SDR 13.5

- do - 41.30 mm ODPipe - SDR 13.5

- do - 54 mm ODPipe - SDR 13.5

SYMET PUSH COCK (CAT.NO:139) 15 mm with 1/2'' BSP (15 mm) female threads 80 mm long 30 mm height and 30 mm breadth having approximate weight of 47gms.

Supply and fixing of following Copper ball cock with PVC ball Indian make ISI mar.

- do - 25.40 mm Copper ball

- do - 19.05 mm Copper ball

- do - 12.70 mm Copper ball

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

- do - Single coat for old iron work/ old plastered surface

- do - Two (2) coats for old iron work

- do - Two (2) coats for new iron work, over priming coat with ready mixed red oxide metal primer paint for new iron work (total three (3) coats)

Engaging of following Unskilled/ Semi skilled workmen (Each per day)

- do - Unskilled work men Man mazdoor/ Woman mazdoor

- do - Semi skilled work men (2nd Class) Mason/ Carpenter/ Painter/ Plumber