Construction of Govt Sen. Sec. School Shawga Tehsil Rajgarh Distt.Sirmour(H.P.)(SH C/O Main Gate and PCC B/wall) (Under Need Based Development of School).

Amount

Earthwork in excavation for all type of roads, structures such as retaining wall, breast wall, culvert, drain and parapets etc. in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiesling / wedging out rocks (where blasting is prohibeted) as per drawing and technical specification true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 305.1(Three hundred Five point One) and 1606.1(One six zero six point one) including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all lead and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable material. All work of excavation by blasting shall be carried out by taking all necessary precautions against soil erosions, damage to hill side & any structure near about, water pollutions etc., and to protect stability of hill side rock. Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable excavated materials in specified manners to dumping site(to be arranged by the contractor), trimming, filling of unevenness blindages and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Providing form work with steel plates 3 15mm three point one tive milimetre) tnck weided with angle iron frame 30x30x5mm so as to give a far finish including centring shuttering strutting and propping etc with wooden batters and batins height of propping and centring below supporting floor to coling up to all heights and removal of the same for insilu-reinforced concrete & plain concrete work in Floor etc upto 200mm thickness.

Providing and laying Cement Concrete 1:4:8 (one cement: Four sand: Eight graded hard stone aggregate 40mm(Twenty five) millimeter)nominal size} for plain/reinforced concrete in open foundation complete as per drawing and HP PWD techinical specifications clause 802, 803, 1202 & 1203 i/c carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in- Charge.

Providing and laying cement concrete work 1:1.5:3 cement: 1 sand 1.5 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and renforcement for reinforce cement concrete including carnage of materials in all leads

Providing and laying cement concrete 1:2:4 1 cement 2 sand 4 grades stone aggregate 20 mm nominal ) and curing complete excluding cost of centring and shuttening Suspended foors, roofs, landing and shelves and their support, balconies beams. geders, bressumers and cantiever including carriage of materials.

Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (One Hundred milimeter) dia AC pipe extending through the full width of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 (Clause - Six hundred Fourteen, Seven hundred Nine, One thousand Two hundred Four point Three point Seven) ),including hauling /carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in- Charge

Providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete as per structural drawing in all floors up to all heights and levels, direction of Engineer-in-Charge and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sectionss trusses and framed work including cutting hoisting fixing in position and applying apriming coat of red lead paint in trusses and trussed pulrin in buildings. and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm diametre with prepainted limpet and rubber washers complete with all accessories as requiredand as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

RAJKUMAR

Kapil Dev

Ved Parkash

RAJESH KUMAR BHANDARI