Loading…
Loading…
Tender Value
₹41.3 L
EMD Value
₹42,000
Closing Date
29 Jun 2026, 6:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, R and B Division, Himatnagar
Construction of New Building of Sub Centres and Group Centres under intensive Cattle Development Programme at Padardi, Dist- Sabarkantha
313342
02 of 2026-27
Open
Civil Works - Buildings
Sabarkantha
7 documents required · 7 mandatory
₹1,500
Executive Engineer, R and B Division, Himatnagar
₹42,000
12 Jun 2026
12 Jun 2026
12 Jun 2026
29 Jun 2026
12 Jun 2026
Bill of Quantities
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
1 Demolition including stacking of serviceable materilas and 52.00 Cum 1081.84
disposal of unserviceable materials with all lead and lift.
2 Demolition of Brick work and stone masonry including 48.00 Cum 562.85
stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift.(ii) In Cement
3 Dismentling steel work including distempering and stacking 387.00 Kg 3.81
the materials with all lead and lift.
4 Dismentaling of sheet roofing including ridges, Hips, 25.00 Sqmt 49.18
Valleys,Gutters etc. stacking of serviceable materilas and
disposal of unserviceable materials with all lead and lift.(i)
G.I.sheet roofing.
5 Excavation for foundation upto 1.5 m depth including 150.00 Cum 157.08
sorting out and stacking of useful materials and disposing
off the excavated stuff upto 50 Meter lead.(B) Dense or
6 Filling available excavated earth (excluding rock) in 135.00 Cum 136.92
trenches. plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidating each disposited
layer by ramming and watering.
7 Filling in plinth with sand under floors including watering 10.00 Cum 481.81
ramming, consolidating and dressing complete
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
8 Filling in foundation and plinth with murrum or selected 14.00 Cum 294.39
soil in layers of 20cm. thickness including watering,
ramming and consolidating etc. complete.
9 Providing and laying controlled cement concrete M.150 for 32.00 Cum 4376.33
curing complete including cost of formwork but excluding
the cost of reinforcement for reinforced concrete work in
(A) Foundations, footings,Base of columns and Mass
10 Providing and laying controlled cement concrete M.250 and 37.90 Cum 4714.99
curing complete including cost of formwork but excluding
the cost of reinforcement for reinforced concrete work in
(A) Foundations, footings, Base of columns and Mass
11 Providing and laying controlled cement concrete M250 and 6.00 Cum 8237.56
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Columns, pillars posts and struts Column Up to
12 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 6.00 Cum 2936.68
coarse sand : 8- Machine Crushed stone aggregates 40 mm
nominal size) and curing complete excluding cost of
formwork in (A) Foundation and Plinth
13 Providing and laying controlled cement concrete M.250 and 14.00 Cum 6001.42
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work for Ground and Plinth Beams
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
14 Providing and laying controlled cement concrete M.200 and 10.00 Cum 8172.43
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Columns, Pillars posts and struts, For All Floors.
15 Providing and laying controlled cement concrete M.200 and 5.00 Cum 6030.34
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Beams For All Floors.
16 Providing and laying controlled cement concrete M.200 and 11.70 Cum 6605.11
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Slab for All Floors.
17 Providing and laying controlled cement concrete M.200 and 2.00 Cum 6369.58
curing complete including the cost of form work but
excluding the cost of reinforcement for reinforced concrete
work in Lintels For All Floors.
18 Providing TMT Bar FE 500D reinforcement for R.C.C. 9703.00 Kg. 77.29
work including bending, binding and placing in position
complete for All Floor
19 Brick work using Common Burnt Clay building bricks 56.00 Cum 4495.99
having crushing strength not less than 35 kg./Sq.Cm. in
Super structure Above plinth level up to All Floor levels in
Cement Mortar 1:6 (1- Cement : 6 -fine sand)
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
20 Providing & Fixing Chicken mesh for joint between brick 37.00 Sqmt 173.72
work & RCC work fixing with nail & GI washer as per
director in charge
21 Providing 15mm thick cement mala plaster in single coat on 327.00 Sqmt 241.38
Rough (Similar)side of single or half brick walls for interior
plastering and finished even and smooth fininshing with a
floating coat of neat cement slurry in (i) Cement mortar 1:3
(1-cement:3-sand), 10x10 mm groves etc. Complete for All
22 Providing 10mm thick cement mala plaster in single coat on 87.00 Sqmt 215.30
brick/concrete walls for interior plastering and finished even
and smooth fininshing with a floating coat of neat cement
slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete
for All Floors.
23 20mm thick sand faced cement plaster with Gutka Finish on 295.00 Sqmt 321.10
walls upto height 15 metres above ground level consisting
of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-
sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :
1-sand) with 5mm grooves, etc. complete.
24 Applying two coats of putty & two coats of primer of 279.00 Sqmt 40.59
approved brand and manufacture on new wall surface to
give an even shade including thoroughly brushing the
surface free from mortar dropping and other foreign matter
and sand papered smooth.
25 Wall painting (three coats) with plastic emulsion paint of 192.00 Sqmt 125.52
approved brand and manufacture on undecorated wall
surface to give an even shade including throughly brushing
the surface free from mortar droppings and other foreign
matter and sand papered smooth.
26 Ceiling painting (three coats) with plastic emulsion paint of 87.00 Sqmt 131.02
approved brand and manufacture on ceiling and soffits of
slab surface to give an even shade including throughly
brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth.
27 Finishing wall with weather proof exterior emulsion paint 398.00 Sqmt 93.93
(two coats) with Damp Proof Coating (one coat) on wall
surface to give an required shape even shade after
thoroughly brushing the surface to remove all dirt, and
remains of loose powdered materials.etc complete
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
28 Providing and fixing pre-cast Rubber Dye / steel Dye inter 47.00 Sqmt 706.93
locking concrete block 60mm thick with grade of concrete
M300 pnumatic compressed / vibrated mechanically and as
per approved design Confirming to IS 15658 :
including 35 mm Sand layer for levelling and filling the
joint with sand in proper line and level as per guidlines of
IRC : SP 63-2018 etc. Complete.
29 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 47.00 Sqmt 1346.35
mm (average) base of cement mortar 1:6 ( 1 cement:
coarse sand) on new surface or fixing on existing flooring
by adhesive material including dismentaling of existing
flooring and jointed with color cement slurry including
finised with flush pointing & cleaning the surface etc.
complete for DARK shade
30 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 2.00 Sqmt 1195.02
24'' in skrting risers of steps and dedo on 10mm thick
cement plaster 1:3 (1-cement : 3-coarse sand) and jointed
with white cement slurry
31 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 3.00 Sqmt 1266.54
flooring over 20 mm (average) base of cement mortar 1:6 (
1 cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including
dismentaling of existing flooring and jointed with color
cement slurry including finised with flush pointing &
cleaning the surface etc. complete
32 Providing and laying coloured glazed tiles of the size 300 38.00 Sqmt 1487.88
mm x 450 mm x 8 mm in skirting, risers of steps and dedo
on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse
sand) & jointed with white cement slurry.
33 Providing and fixing Machine cut, Free edges, Mirror 2.00 Sqmt 2464.40
Polished Granite stone slab flooring 18mm thick laid on
20mm (Average) thick base of cement mortar 1:6 (1-cement
: 6-coarse sand) for Trade & Riser including Half Round
moulding front edge of trade jointed with grey cement
slurry mixed with pigment to match the shade of slab
including rubbing and polishing etc. complete.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
34 Providing and fixing Machine cut, Free edges, Polished 14.00 Sqmt 2510.86
Granite stone slab flooring 18mm thick for vertical
wall/Doors/Windows Sill, Jams for cladding as per design
including full moulded round inside edge and laid on10mm
thick base of cement mortar 1:3 (1-cement : 3-coarse sand)
jointed with grey cement slurry mixed with pigment to
match the shade of slab including rubbing and polishing etc.
35 Providing and fixing Machine cut Bothside mirror polished 3.00 Sqmt 618.12
kota stone in single piece (Max 150 cm long and width upto
45 cm with both side polished) for horizontal Shelves
including makng grooves & Fixing the same in Brick/
concrete wall finished with flush pointing, round open edge
36 Providing and laying water prooofing treatment with china 72.00 Sqmt 1132.21
mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding
maintaining slope for plain and curve surface & 12 mm to
20 mm broken pieces not more than 2.5 cm of ceramic/ of
glazed tiles to be laid over cement mortar 1:3 to plain or
slope and to be tempered to bring mortar creme out upto
surface using white cement including rounding off junctions
and extending them upto 15 cm along the wall,clearing with
water and oxalic acid etc. as directed.
37 Providing and fixing flush door with Single shutters, solid 7.00 Sqmt 4211.70
core construction with frame of Anodized Alluminium
section (weight not less than 1.1 kg/mt.) with cross board
and finished with 1 mm thick laminate on both side of
shutter, machine glued PVC beading on periphery including
30cm long Stainless Steel Pipe handle on both side SS
ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm both
side, anodised alluminium butt hinges with necessary
screws. (B) Non-decorative type and block board core
anodised alluminium butt hinges in flush door shutters (2)
38 Providing and fixing flush door with Double shutters, solid 3.00 Sqmt 4720.74
core construction with frame of Anodized Alluminium
section (weight not less than 1.1 kg/mt.) with cross board
and finished with 1 mm thick laminate on both side of
shutter, machine glued PVC beading on periphery,
including 30cm long Stainless Steel Pipe handle on both
side SS ASIS 304 grade, heavy duty Floor Spring each side,
SS Stopper 20cm, SS Aldrop 30cm both side, anodised
alluminium butt hinges with necessary screws. (B) Non-
decorative type and block board core anodised alluminium
butt hinges in flush door shutters (2) 35 mm thick.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
39 Providing and fixing window having extruded aluminum 6.00 Sqmt 1713.70
Colour anodized section frame main outer size 63.50 x
38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two
track member size 61.85 mm x 31.75 mm x 1.20mm @
wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x
31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding
shutters of horizontal member size 40mm x 18mm x
1.29mm @ wt.of 0.456Kg/mt, vertical member of size
0.457 Kg/mt with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame
as per details etc complete for window.
40 Providing and fixing Standard extruded colour anodized 1.00 Sqmt 1368.55
alluminium section frame weight 1.094 kg/Rmt.with
Adjectable Glass Louvers of 5 mm thick transparent glass
colour tinted float glass with transparent silicon gasket with
allu. Powder coated fittings & fixtures.
41 Providing & fixing M.S. Grill using 16 mm dia. M.S. Bars 13.00 Sqmt 3268.36
@ 15 cm C/C fixed in frame using angle 35mm x 6mm,
35mm x 6mm flat in center, and Galvanized wire mesh jali
20mm x 20mm spacing, including red lead primer coat and
two coats of oil painting etc. complete.
42 Providing erecting and fixing double coated ISI water tank 2000.00 Litre 3.95
of required capacity each with all necessary fittings and
connection etc. complete on terrace
43 Providing, laying and jointing in true line and level 110 9.00 Rmt 876.11
diameter U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm
length x 145 mm heigh at every 2000 mm center to center
or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing
of pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
44 Providing, laying and jointing in true line and level 160 5.00 Rmt 834.38
diameter U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm diametre x 210 mm
length x 196 mm heigh at every 2000 mm center to center
or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing
of pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
45 Providing laying and jointing in true line and level 40mm 10.00 Rmt 148.12
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
46 Providing laying and jointing in true line and level 25mm 20.00 Rmt 91.84
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
47 Providing laying and jointing in true line and level 15mm 20.00 Rmt 72.65
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
48 Providing and fixing concealed center point to wall ceiling 20.00 Rmt 253.82
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
good the wall, ceiling and floor etc. complete. 25 mm.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
49 Providing and fixing concealed center point to wall ceiling 20.00 Rmt 170.36
& floor CPVC (SDR 13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water of following dia.
nominal bore tube fittings and clamps including making
good the wall, ceiling and floor etc. complete. 15 mm.
50 Providing and fixing Gun metal check or non-return fullway 2.00 Nos. 663.43
wheel valve.(E) 40mm dia.
51 Providing and fixing ball cock of approved. quality as 1.00 Nos. 189.84
directed.(A) Copper Metal (ii) 50mm dia.
52 Providing and fixing wash down water closet (Wall Hung 1.00 Nos. 5172.51
type, W.C. Pan) with integral P or S trap, Health Fauset
Heavy Duty with hook and PVC dual flush tank with
complete fittings including jointing the trap with soil pipe
in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and
cover to be measured and paid for separately)(A) vitreous
China Pattern :(i) in white colour
53 Providing and fixing washbasin (ii) Flat Back washbasin 1.00 Nos. 2180.72
550 mm x v 400mm size. (i) In white colour including with
approved sanitary grade material with CP waste coupling,
waste pipe, 15mm dia Pillar & Stop Cock of approved
brand with connection 15mm dia flexiable pvc pipe etc.
54 Providing and fixing brass screw down stop tap.(A) 15mm 3.00 Nos. 205.83
55 Providing and fixing PVC SWR Nahni trap IS 14735 for 2.00 Nos. 586.60
drain - 100 mm diameter with jali of the following nominal
diameter of self cleansing design with C.I scread down or
hinged grating including the cost of cutting and making
good the walls.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
56 Providing and fixing S.W. gully trap with C.I. grating brick 1.00 Nos. 1246.92
masonry chamber and water tight C.I. cover with frame of
300mm x 300mm size (inside) with standard weight.(i)
Square mouth traps.(B) 150mm x 100mm size P or R type
57 Providing and fixing C.P. brass towel rail comlete with C.P. 1.00 Nos. 616.42
brass brackets fixed to wooden plugs with C.P. brass
scews.(B) 600mm x 20mm size.
58 Providing and fixing in position PVC cowel went to pipes 1.00 Nos. 101.00
59 Applying general insecticide pest control treatment to 104.00 Sqmt 80.62
floors, cupboards etc including labour materials etc.
complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -
II( (0.075% concentration by mass) is recommended 10.5ml
chemical diluted with 5 liters of water application 0.5 litre
chemical /Sqm of surface is recommended as per I.S.
60 Providing and fixing Safety Grills of required pattern for 765.00 Kg 110.60
windows/door using MS polished bars, Rectangular CRS
Pipes of size 50mm x 30mm x 2mm or Required at required
spacing as per design and hold fast with coach bolts
including one coat of and two coats of matt finished oil
painting etc. complete
61 Providing, Fabricating, supplying, and ercting Parking Shed 15.00 Sqmt 5504.50
of required size and shape (as per site conditions and
Engineer in charge's Direction), including all necessary civil
and structural works. The Shed shall be made of M.S.
tubular/structural steel sections (confirming to IS standards)
with proper welding, bolting, and fixing arrangement.
62 Providing and fixing including the cost of material & 2.00 Nos. 16373.98
transportation of 7.5 ft. high, 3 ft. wide and 6 ft. long Travis
for Cattle weighing 75 kg. made from Galvanized pipe to
restrain the animal from treatment.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
63 Brick work using common burnt clay building bricks having 18.00 Cum 4214.33
crushing strength not less than 35 kg./Sq.Cm. in foundation
and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)
64 Providing and laying controlled cement concrete M.150 and 3.00 Cum 7426.53
curing complete excluding the cost of formwork and
reinforcement for reinforced concrete work for Coping
65 Providing & laying weep hole in Aburtments, and returns 101.00 Each 86.73
by using A.C. pipe of 100mm including laying in proper
grede and jointing the completed as per detailed
66 Steel work, welded in built up sections framed work 3.00 Quintal 9108.49
including cutting, hoisting, fixing in position and applying a
priming coat of red lead paint. (A)In beams and joists,
channels angles Tees, flats, with connecting plates or angle
cleats as in main and cross beams. Hip and jack rafters,
purlins conneted to common rafters and the like
67 Drilling of pilot bore hole of size 250/300 mm diameter at 180.00 Rmt 1544.29
above site by mud finish direct rotary rig etc. complete
68 Reaming of 250/300 mm diameter pilot bore hole to size 150.00 Rmt 742.35
450 mm diameter including assembling, lowering housing,
casing strainer pipes with gravel packing and clay ball
packing etc. complete.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
69 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70
available of sand free discharge ( Minimum 6.0 Hours)
70 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90
ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X
71 Supply of 200 mm diameter V-wire screen pipe of slot size 60.00 Rmt 1401.88
1.0 mm nominal hole etc. complete.
72 Supply of M.S. Bore clamps with 3 holes on either side 1.00 Pair 1753.36
with nuts and bolts of standard make and suitable size (g)
750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.
73 Supply of Bore Plug having 100 mm height made from 1.00 Nos. 834.26
M.S. plate with 3 holes at equal distance on circumference
for nuts-bolts type, locking arrangement with nut-bolts &
lock nuts of standard make complete. (b) from 5 mm thick
M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.
74 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99
medium class pipe as per I.S.S. suitable for (b) 200 mm
diameter pipe etc. complete.
75 Supply of Steel Bent plates suitable to ERW pipe for (b) 8.00 Nos. 71.71
200 mm diameter and 150 x 150 x 6 mm size etc. complete.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
76 Supply of Gravel of size selected size up to 4mm to 6 mm, 6.00 Cmt 2295.73
including stacking and filing etc. complete.
77 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00
pilot bore hole etc. complete.
78 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00
including water sample chemical analysis etc. complete.
79 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62
dia or more having 3 phase motor capacity not less than
HP with following capacity. Lifting and Lowering taken
extra. [C] 25 stage 160 to 100 LPM discharge at 185 to
mtr head for 50 mm dia delivery pipe
80 Providing and erecting PVC corrugated Flexible conduit 170.00 Rmt 26.26
with required numbers of coupling, PVC bushes, Check-
nuts etc. complete of following sizes. (3) 32 mm diameter
81 Lowering of submersible motor pump set complete with 1.00 Job 2568.43
required. Nos. and size of casing pipes erected by means of
proper chain pulley block & pipe wrenches after checking
of threads of each pipe with coupling to take the load of the
pump set and pipe assembly filled up with water. (B) Above
60 mtr and up to 120 mtr
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
82 Supplying and erecting approved make motor control 1.00 Each 8710.24
cubical panel (Direct - on - line) made from 16 G. CRCA
sheet duly epoxy powder painted inside and outside with
hinged doors and locking, arrangement consisting of
suitable size of ON-OFF isolator (AC - 3/23 duty) main
fuses, single phasing preventer, indicating lamps for R-Y-B
phases, overload relay, automatic water level controller,
Ammeter, Voltmeter each with two way selector switch
incoming, wires duly socket crimped, main contactor &
overload relay, start-stop push buttons, to be erected on
angle iron frame grouted on wall as directed. The isolator,
overload relay & contactors will be of L&T, Seimens or
BCH make only (a) DOL upto 7.50 H.P.
83 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 150.00 Rmt 136.35
unarmoured copper cable 1.1 KV grade to be erected as
directed of following size. (E) 3 core 2.5 Sq. mm
84 Providing laying and jointing in true line and level 50mm 40.00 Rmt 195.67
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
materials. and fixing butterfly valve of IS approved brand
85 Providing 2.00 Nos. 1595.80
86 Excavation for foundation for depth from 1.5 m to 3.0 m 8.00 Cum 287.47
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(C)
87 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 3.00 Nos 958.17
size having weight not less than 35Kg.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
88 Box cutting the road surface to proper slope and camber for 33.00 Cum 109.05
making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed upto 50Mt.lead.
89 Construction of B.I.T.C. granular sub base by providing 15.00 Cum 1592.14
granular material of Grading II, spreading in uniform layers
with motor grader on prepared surface , mixing by mix in
place method with front end loader at OMC , and
compacting with vibratory roller to achieve the desired
density ,complete as per Clause
90 Providing, laying, spreading and compacting stone 11.00 Cum 2054.02
aggregates of specific sizes to water bound macadam
(Grade-II) (B.T. Metal of size 45 to 63 mm) specification
including spreading in uniform thickness, hand packing,
rolling with 3 wheeled steel/ vibratory roller in stages to
proper grade and camber, applying and brooming requisite
type of screening/ binding Materials to fill up the interstices
of coarse aggregate, watering and compacting to the
required density.
91 Compaction and finishing of cement concrete road by 74.00 Sqmt. 72.72
trimix process providing extra labour charges for the trimix
vaccum dewatering service process on cement concrete road
surface by using vaccum dewatering pump floater surface
vibrator including making rough finish to surface as per in
including levelling the complete.
92 Earthwork for embankment including breaking clods, 29.00 Cum 131.93
dressing with all lead and lift (including watering and
consolidation)(A) From Borrow pits within land width
93 Rolling and consolidation of soling including filling in 70.00 Sqmt. 22.75
depression which occur during the process, with power roler
8 tonne to 12 tonne.
94 Supplying of yellow or Goradu soil with all lead and lift 18.00 Cum 505.00
including spreading watering dressing and rolling with hand
roller etc complete selected soil
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
95 Supplying of well rotted FYM manure with all lead and lift 1.00 Cum 378.75
including spreading mixing dressing and rolling with hand
roller etc. complete
96 Supplying and planting Dibbling semi carpet lawn at 70.00 Sqmt. 90.90
distance of about 15 cm x 15 cm after proper anti termite
treatment and rolling the same by hand roller and watering
97 Bowling and developing flowering plants grown in nursery 3.00 Nos. 80.80
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer
pesticides, fungicides, hormones & maintaining the plants
up to three months as Jasud
98 Bowling and developing flowering plants grown in nursery 2.00 Nos. 85.85
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer
pesticides, fungicides, hormones & maintaining the plants
up to three months as Croton
99 Bowling and developing flowering plants grown in nursery 3.00 Nos. 101.00
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer
pesticides, fungicides, hormones & maintaining the plants
up to three months as Deserted Golden Durenta Varigated
100 Bowling and developing flowering plants grown in nursery 2.00 Nos. 95.95
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer
pesticides, fungicides, hormones & maintaining the plants
up to three months as Deserted Pendulla Asopalav
101 Bowling and developing flowering plants grown in nursery 5.00 Nos. 121.20
having approximate height 4 to 5 t or Height as per
Landscape Plan with natural growth and natural colour
planted in a lump of soil packed in polyethylene bag or
earthen pot including organic & chemical fertilizer
pesticides, fungicides, hormones & maintaining the plants
up to three months as Deserted Potted Plants
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
102 Labour charges for planting various plantsafler proper anti- 15.00 Nos. 70.70
termite treatment in pits including placing properly and
filling the pits with required prepared mix soil and watering
and dispporting etc. complete
103 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00
month stipulated period is completed for plantation of lawn
and plants including applying second round of proper anti-
termite treatment
104 Providing laying and jointing in true line and level 40mm 10.00 Rmt 148.12
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
105 Providing laying and jointing in true line and level 15mm 10.00 Rmt 72.65
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
106 Providing and fixing brass screw down stop cock (A) 15 2.00 Nos. 205.83
107 Rubber Hose Pipe 15 mm dia of approved brand and make 30.00 Rmt 90.90
108 Excavation for foundation upto 1.5 m depth including 8.00 Cum 122.99
sorting out and stacking of useful materials and disposing
off the excavated stuff upto 50 Meter lead.(A) Loose or soft
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
109 Providing, laying and jointing in true line and level 110 45.00 Rmt 876.12
diameter U.P.V.C (Type B) conforming to IS 13592-1992
with one end plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm
length x 145 mm heigh at every 2000 mm center to center
or shall be concealed in walls as directed including
necessary fittings such as bends, shoes etc. including testing
of pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
110 Providing & Laying Rain Water Junction Chamber of Clear 1.00 Nos. 6241.80
Internal Size 0.60 x 0.60 x 0.75m with excavation of size
1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including
brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height
with 15mm thick Cement Plaster inside & outside (1:4),
1.06 x 1.06 RCC M200 top slab of thickness 0.15m with
TMT steel and 455mm x 610mm cast iron manhole cover
with frame weight not less than 35 kg as per directed by
Engineer-in-charge.
111 Providing & Laying Filter chamber of brickwork 0.23 thick 1.00 Nos. 22067.49
in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m
and excavation dimension of 2.80m x 1.96m x 1.35m
including C.C. M200 Bed Concrete 0.15m thick and RCC
M200 Top slab of thickness 0.15m with TMT steel,
Including 15mm (1:4) thick cement plaster inside & outside
with Cement slurry & top cover with frame of minimum
weight of 35kg, including filling filter material of 200mm
thick each layer of 25-40mm, 10-20mm of BT metal and
sand as per directed by engineer-in-charge
112 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36
mt x 2.00 mt x 4.00 mt. For water logging with excavation
in any strata upto four meter depth, Brick work 0.23 thick in
C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with
15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal
40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.
depth and 2mt. depth with coarse sand in layers including
makng P.V.C. line for water inlet etc. as directed with
250mm dia bore 15mt. depth amd 150mm dia PVC pipe of
10 Kg.f/cm2 casing wih gravel packing or as directed.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
113 II) Fire Extinguisher and Exit Signages Supply, 2.00 Nos. 6447.84
installlation, testing and commissioning of Carbon Dioxide
(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683,
with ISI marked / TAC approved fitted with required
accessories including wall suspension brakets.
114 Supply, Installation, Testing & Commisioning of ABC type 2.00 Nos. 2222.00
6kg confirm IS:15683, with ISI marked / TAC approved
fitted with required accessories including wall suspension
115 Excavation for foundation upto 1.5 m depth including 9.00 Cum 272.57
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(B)
Dense or Hard soil (Executed with Manual Labour)
116 Excavation for foundation for depth from 1.5 m to 3.0 m 3.00 Cum 498.93
including sorting out and stacking of useful materials
and disposing of the excavated stuff upto 50 Meter
lead.(C) Hard Murrum (Executed with Manual Labour)
117 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 1.00 Cum 2566.77
fine sand : 10- graded brick bat aggregates 40mm nominal
size) and curing complete excluding cost of formwork in
(A) Foundation and Plinth
118 Half brick masonry in common brunt clay building bricks 8.00 Sqmt. 629.84
having crushing strength not less than 35 Kg/Sq.Cm. in
Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in
foundation and plinth (B) Conventional
119 Providing and laying cement concrete flooring 1:2:4 (1- 4.00 Sqmt. 352.01
cement : 2-coarse sand : 4-graded stone aggregate 20mm
nominal size) laid in one layer and finished with a floating
coat of neat cement. (B) 50mm thick.
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
120 Providing 15mm thick cement plaster in single coat on 32.00 Sqmt. 184.78
Rough (Similar)side of single or half brick walls for
interior plastering upto floor two level and finished even
and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
121 Providing and Laying ordinary cement concrete 1:2:4 (1- 1.00 Cum 6888.15
Cement 2- coarse sand : 4- graded stone aggregates 20 mm
nominal size) and finishing smooth with curing etc.
complete including the cost of formwork but excluding the
cost of reinforsement for R.C.C work in (iii) Slabs having
more than 10 cm and upto 13 cm. thickness
122 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 317.48
size having weight not less than 35Kg.
123 Providing and Constructing sock pit of 2.46 mt. dia outside 1.00 Nos 30914.08
and 5 mt depth with honey combed masonary 6.50 mt. from
bottom and 0.60 mt. brick masonary in C.M. 1:6 top with
RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia
& C.I. cover and cowel vent etc. comp
124 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 21.00 Pts 485.81
wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper wires up to
10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base frame covered
with textured/metallic/white front plate modules erected on
/ in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete.Cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
125 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 12.00 Pts 674.68
sq.mm (Green) both are of .ISI marked 1.1 KV Grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length, in below type of pipe erected with 6A Modular
type switch and hum free EME step type electronic fan
regulator mounted and accessories with earth continuity of
following type erected on PVC / Metallic/Wooden box,
single mounting base frame covered with
textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary ceiling rose
/ H.D.Connector as directed..(f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling
complete.Cat-III
126 Point wiring for Individual Plug with & earth wire of 1.5 5.00 Pts 510.05
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multi strand copper wires up to 10 mtr
length, in below type of pipe erected complete with
Modular type switch & 5 pin Plug erected on PVC /
Metallic/Wooden box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe erected
with following type of accessories. [I] For 6A Plug and 6 a
switch with 2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board (f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling
completeCat-III
127 Point wiring for on board Looped Plug with 6A Modular 9.00 Pts 257.55
type switch & 5 pin socket erected on PVC /
Metallic/Wooden box, single mounting base frame covered
with textured / metallic/white front plate modules erected
on / in wall / ceiling with following type accessories.Cat-III
128 Providing following type of Modular Type Accessories 1.00 Nos. 160.59
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge. (3) Two
Pin/RJ-11 Telephone Socket[A] For One Gang Cat.III
129 Providing following type of Modular Type Accessories 1.00 Nos. 160.59
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge.(4) TV Co-
axial Socket outlet Cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
130 Providing following type of Modular Type Accessories 9.00 Nos. 25.25
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge. (7) Blank Plate
131 Providing following type of Modular Type Accessories 3.00 Nos. 160.59
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge. (8) Computer
RJ-45 socket Cat-III
132 Providing following type of Modular Type Accessories 2.00 Nos. 180.79
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge. (9) 16 Amp.
SP one way switch Cat-III
133 Providing following type of Modular Type Accessories 2.00 Nos. 199.98
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front
plate , modules erected with necessary connections as per
site situation directed by Engineer In charge. (10) 6/16Amp.
Universal socket Cat-III
134 Providing and erecting ISI mark Medium class RIGID PVC 140.00 Mtrs. 33.33
PIPES of following size complete to be erected on/in wall
or ceiling erected with necessary PVC fittings & Junction
boxes fixed with adhesive solution & Clamps with
following dia of pipes, in approved manner as directed (b)
135 Providing and erecting ISI mark Medium class RIGID PVC 35.00 Mtrs. 54.54
PIPES of following size complete to be erected on/in wall
or ceiling erected with necessary PVC fittings & Junction
boxes fixed with adhesive solution & Clamps with
following dia of pipes, in approved manner as directed (c)
136 Providing & erecting PVC Corrugated Flexible Conduit 25.00 Mtrs. 21.21
with required nos. of coupling, PVC bushes, Check-nuts
etc. complete of following sizes.(2) 25 mm
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
137 Providing & erecting PVC Corrugated Flexible Conduit 20.00 Mtrs. 27.27
with required nos. of coupling, PVC bushes, Check-nuts
etc. complete of following sizes.(3) 32 mm
138 Providing and erecting Mains with 1.1 KV grade FRLS 322.00 Mtrs. 82.82
PVC insulated ISI marked stranded Copper conductor wire
in following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper conductor
FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (A) with medium class Rigid
PVC pipe and accessories (b) 2 wire 2.5 sq. mm
139 Providing and erecting Mains with 1.1 KV grade FRLS 120.00 Mtrs. 112.11
PVC insulated ISI marked stranded Copper conductor wire
in following type of pipe to be erected in / on wall / ceiling
with 2.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
following size (A) with medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm
140 Providing and erecting Mains with 1.1 KV grade FRLS 32.00 Mtrs. 180.79
PVC insulated ISI marked stranded Copper conductor wire
in following type of pipe to be erected in / on wall / ceiling
with 2.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
following size (A) with medium class Rigid PVC pipe and
accessories (h) 4 wire 6 sq. mm
141 providing and erecting Mains with ISI marked, 1.5KV grade 20.00 Mtrs. 91.91
electrolyte multi stranded, annealed copper conductor with
heat resistant PVC insulated conforms to IS 694, IEC -
erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs, nuts and
bolts if required. (f) One wire 10.00 sq. mm
142 Supplying and erecting Flexible PVC insulated multi strand 53.00 Mtrs. 46.46
multi core 1.1 kv grade ISI marked copper wires of
following size to be erected as directed.e) 1.50 Sq.mm
core round PVC sheathed
143 Providing & Erecting approved make following size of TV 45.00 Mtrs. 62.62
Co-axial flexible cable comprising inner conductor of solid
bare copper insulated with Foam PE & Secondary
conductor made of poly - Aluminium film bonded Al.
Braids @ suitable coverage overall sheathed with black
PVC insulation. e).RG-11
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
144 Supplying & erecting approved make Telephone Cable 25.00 Mtrs. 20.20
electrolytic copper conductor PE insulation twisted in two
pairs, & wrapped with FRLS PVC tape & sheathed with
FRLS PVC or HFFR outer Jacket suitable for telephone
wiring & confirming to C-DOT erected in existing pipe. of
following size of conductors & nos.of pairs. With necessary
connections. [A] Conductor Size 0.5 mm (a) Unarmoured
145 Supplying & erecting approved make LAN cable of 96.00 Mtrs. 47.47
following size in existing pipe as per direction [C] CAT -
146 Supplying & erecting M.S. Box having 16 Gauge painted 1.00 Nos. 88.88
with red oxide or Heavy duty PVC box erected flushed on
wall or concealed in wall with necessary plastering &
finishing as directed of following size. (c) 200 mm x
147 Providing & erecting Switch board for Computer or 3.00 Nos. 1133.22
electric apparatus consisting of following modular type
accessories mounted with PVC / Metallic concealed/open
box with single mounting base frame covered with
textured/metallic /white front plate,modules erected with
necessary connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-
148 Decorative call bell Ting-tong box type 250 volts complete 1.00 Nos. 71.71
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
149 Supplying and erecting LED indoor fittings with LEDs of 12.00 Nos. 373.70
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/ aluminium die
cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V,
Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage capacity
of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Tube
Light with integral/ non-integral driver . (iv) 22-24 Watts,
Surge - 2KV,IP-20, conventional 4 feet Cat III
150 Supplying and erecting led lamps with following wattage 1.00 Nos. 112.11
capacity of 220 to 240 voltage, minimum 15000 burning
hours life, 500 V in built-surge protection,Polycarbonate
diffuser, mounting suitable for E14 / E27 / B22 lamp
holders, pf >= 0.5 (A) LED Lamps integral type, with PC
diffuser suitable LAMP holder (i) 5 to 8 watts Cat-III
151 Supplying and erecting LED indoor fittings with LEDs of 6.00 Nos. 1794.77
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/aluminium
pressure die cast powder coated and high U.V. & corrosion
resistance with diffuser housed in aluminium casted body
with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage capacity
of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (B) LED
Panel Light with provision for Plane front frame with
translucent cover fixed to housing complete.IP20 (vi)
watts, 24" x 24", Surge- 2KV Cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
152 Supplying and erecting LED street light / Flood light 6.00 Nos. 3345.12
fittings with High power White LEDs wattage of 3 Watt
and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated and
heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with
company mark/name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10 %, CCT
K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>
100 lumens/watt . LED driver efficiency > 85 %.( fittings
required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Street Light (IP-
65), Surge protection -4KV integral and ,Light must have
440VAC line supply with over-voltage protection. (i) above
36 to 48 watts Cat-III
153 Providing and erecting Approved make Four pole moulded 1.00 Nos. 6173.12
case circuit breaker having breaking capacity ICU of
KA. at 415 V,having normal current rating up to 25 A to
100A. with Fixed thermal & magnetic release suitable to
work on A.C. supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only Cat III
154 providing and erecting Miniature circuit breaker single pole 6.00 Nos. 270.68
0.5A to 2A system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS 8828/1996 with
ISI Mark Cat.III
155 Providing and erecting Miniature circuit breaker single pole 12.00 Nos. 112.11
6A to 25A suitable to operate on 240 V A.C. system and
having breaking capacity 10 KA to be erected in existing
box. confirming to IS 8828/1996 with ISI Mark Cat-III
156 Providing & erecting 240 V MCB double pole switch for 5.00 Nos. 295.93
lighting Load (B Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following
capacity (B) 40 Amp. Cat-III
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
157 Providing & erecting 415 V MCB Four Pole for Motor & 5.00 Nos. 737.30
Inductive Load (C Curve) having 10KA breaking capacity
& confirms to IS :8828 in existing box having following
capacity (B.) for 63 Amp. Cat-III
158 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos. 2913.85
distribution board - flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, Conforms to IS
8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing Per
phase isolation type (PPI) (b) sheet steel double door(ii)6
159 Providing and erecting Approved make RCCBs conforming 3.00 Nos. 2235.13
to IS: 12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 10 KA and suitable for
operation on single phase 240 V,50Hz. having characteristic
of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max.
rating erected as directed (iI) 40 Amps.DP Cat. III
160 Providing and erecting metallic vitrified danger notice 2.00 Nos. 69.69
board as per language suggested by engineer incharge for
MEDIUM VOLTAGE installation to be erected as per IS-
161 Providing and erecting Annealed bare Copper wire 8 to 16 4.00 Kgs. 794.87
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
162 Supplying & erecting earth pit of minimum bore dia.150mm 2.00 Nos. 4591.46
size approved make Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion
free hot dipped G.I.Pipes having Outer pipe dia of 50mm
having 80-200 Micron galvanising, Inner pipe dia of 25 mm
having 200-250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded by
highly conductive compound with high charge dissipation
suitable for following type of applications with chamber
and heavy duty cover. (A)(approved make OEM has to
submit test certificate including value of earth resistance of
installation duly stamped and signed by agency and officer
Incharge has to ensure the value of earthing resistane
mentioned in test Certificate) & having back filling
compound of (B) Inner chemical (CCM Compound)-
Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retain moisture for long
time Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
163 Providing , erecting , fabricating the M.S. structure as per 70.00 Kgs. 77.77
requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections complete
with cutting, welding, grinding & finishing duly painted
with one coat of red oxide with erection on site as per
direction of engineer in charge with necessary grouting,
cementing, plastering & finishing complete.
164 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtrs. 79.79
cable Aluminium conductor for 1.1 KV. to be laid on wall
with necessary clamps or in existing trench / pipe of
following size of cables. (A) 2 core 4 Sq. mm
165 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 32.00 Mtrs. 220.18
cable multistrand Aluminium conductor for 1.1 KV. to be
laid on wall with necessary clamps or in existing trench /
pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (
16 Sq. mm 1/2 core)
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
166 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 240.00 Mtrs. 117.16
cable multistrand / Solid Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in existing
trench / pipe of following size of cables (A) 4 core 4 Sq.
167 Making trench in soft soil of suitable width of 90 cm deep 120.00 Mtrs. 55.55
for laying cable or locating the fault all over the run and
back filling the same and making the surface as normal
168 Making trench in Hard Murrum / Tar Road of suitable 60.00 Mtrs. 74.74
width of 90 cm or required depth for laying any size of
cable or locating the fault all over the run and back filling
the same and making the surface as normal ground.
169 Making trench in Hard Murrum / Tar Road of suitable 24.00 Mtrs. 357.54
width of 90 cm or required depth for laying any size of
cable or locating the fault all over the run and back filling
the same and making the surface as normal ground. (B) If
additional machinery like hammer driller or JCB use [Add]
170 Providing and, fixing heavy duty flange type brass cable 12.00 Nos. 33.33
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for
following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm
171 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 75.75
compression type cable gland with rubber ring for PVC
insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (B) 3 & 1/2
core 35/50 Sq. mm
172 Solder less crimping type Aluminium lugs conforming to IS 48.00 Nos. 6.06
suitable for cable of following size evenly crimped with
high pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. (A)
173 Solder less crimping type Aluminium lugs conforming to IS 16.00 Nos. 20.20
suitable for cable of following size evenly crimped with
high pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. (D)
174 Providing and erecting Approved make Ceiling fan with 11.00 Nos. 1596.81
double ball bearing ISI mark with condenser A.C. 23OV.50
c/s.1200 mm. sweep complete, canopy erected on existing
hook or clamp with earthing. [Make shall be approved by
Engineer in charge]
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
175 Supplying and erecting 19 / 20 mm. nominal bore Medium 6.00 Mtrs. 108.07
Class M.S. Pipe down rod erected duly painted for fan
complete with proper insulation without leckage and
176 Supplying & erecting fan hook box of 10 mm M.S. round 11.00 Nos. 108.07
bar bounded to the RCC bars up to 50mm length each side
and pierced through a 16 Gauge M.S. box / Heavy Duty
PVC box complete erected concealed in Ceiling with
necessary finishing.
177 Supplying & erecting approved make low noise decorative 1.00 Nos. 1366.53
exhaust fan having square frame ABS body with inbuilt
lowers & square frame.250mm with 1350 RPM Cat.II
178 Supplying & erecting approved make SMC press moulded 6.00 Nos. 515.10
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN
rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with
nuts, bolts & washers suitable for erection on pole with
cable clamps& earth bolt of following size of box.(b)
250mm x 200mm x 100mm [deep]
179 Supplying & erecting approved make Digital time switch 1.00 Nos. 3168.37
having lithium cell 6 years operative and operate battery
backup 1 channel day clock with 14 memory programme,
suitable to operate on 240V + 5%, 16A with, floating
contacts Minimum switching setup time 1 minimum &
LCD display. Also comprised permanent ON/OFF
switching. Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover erected as
required with necessary connection erected as directed.
180 Supplying & erecting power contactor ,AC3 duty for time 1.00 Nos. 2782.55
switch complete erected as per direction Cat III [D] 4 pole
Total Cost of Construction Cost
(Rupees Forty One lakh Twenty Nine Thousand Thirty Five and Seventeen Paise Only)
I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent
should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out
*Estimated amount *Estimated amount
Rates Total Amount
Rates Total Amount
Item of work Quantity Unit to estimated
Put to tender Rs…4129035.17 Put to tender Rs.4129035.17
Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….
Net Rs. …………………….… Total Rs. ………….…
The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted
from the rate of original item at the rate of input rate mentioned in all the tender.
5 Dismentalling of Credit materials amounting of Rs. -21,967.50/- must be recovered from Contractor's
respective R.A. Bill.
Deputy Executive Engineer Executive Engineer
R&B Sub Division R&B Division
Khedbrahma Himmatnagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2.GR to be attached with DTP_SBD.pdf
GRs - SBD with Index_compressed.pdf
GR - 1.pdf
GR - 2.pdf
GR - 3.pdf
GR - 4.pdf
GR - 5.pdf
BUILDING WORK BOOKLET.pdf
04.05.2026.pdf
2 Ele MOU.pdf
3 ele Special condition.pdf
4 ELE SUB Condition.pdf
5 Electrical Work - Sch_A.pdf
BOQ_VETERNARY POLYCLINIC.pdf
Details Specification_.pdf
General Specification - State.pdf
SBD Book_2023_VETERNARY POLYCLINIC KHEDBRAHMA_2026_05_18.pdf
Specification Index_.pdf
Download all tender documents and submit your bid