SITC of Solar pumping plant and other appurtunentworks under State sector (Urban) Programme at Shri Bhadraj temple hybrid solar water supply scheme in Block Raipur of District Dehradun

Amount

SITC of Pumping Plant -

Solar Submersible pump set, 0.057 MLD discharge at 165 Mtrs. Head capable to operate in Hybrid mode (3 phase AC grid power supply & solar power supply) complete in all respect for MPS.

Solar Submersible pump set, 0.057 MLD discharge at 149 Mtrs. Head capable to operate in Hybrid mode (3 phase AC grid power supply & solar power supply)complete in all respect.

Design supply & commissioning of RMS based automatic hybrid blending of solar & grid operated controller for above solar pumping system ( MPS and IPS ) with cloud based (RMS) dashboard reporting /monitoring and management system with Inbuilt MMPT tracking facility ensuing over load, under voltage protection force air cooled inverse exponential shut down at the time of low radiation,Parameter display facilities.Dry run protection to avoid dry run of pump set,Manual / auto run slector switch on panel box and Auto reset after every fault and on / off feature depending of water level in tank by sensor based float switch.( 02 Nos spare )

S.I.T.C. of IOT based intelligent electronic flow meter 32 mm size

Float switch with control wire. ( for tank empty and full)

GSM sim based mobile phone operating device

Supply of solar DC wire 6 sq. mm X 1 core, copper conductor, PVC insulated.

Jointing material and other fittings

Supply of Submersible cable 10 sq. mm X 3core, copper conductor, PVC insulated

Solar photo voltic mono crystalline solar module/PV Panel array 540/ 550 watt each required for operation of pump at MPS.(minimum 10 KW or as per requirement for the pump )

Solar photo voltic mono crystalline solar module/PV Panel array 540/ 550 watt each required for operation of pump at IPS.(minimum 10 KW or as per requirement for the pump )

Hot deep galvanized Pole mounted steel Structure of adequate strength and appropriate design, which can withstand load of modules and high wind velocities up to 150 km per hour and height of the panels from ground level minimum 3 meter at MPS .

Hot deep galvanized Pole mounted steel Structure of adequate strength and appropriate design, which can withstand load of modules and high wind velocities up to 150 km per hour and height of the panels from ground level minimum 3 meter at IPS .

Construction of CC foundation / base for mounting structure at MPS with all consumable material ie. Cement, concrete, sand, iron bar etc.

Construction of CC foundation / base for mounting structure at IPS with all consumable material ie. Cement, concrete, sand, iron bar etc.

Angle iron frame and wire mess type fencing of SPV Panels complete with C.C foundation for MPS and IPS .

Lightning arrestor with pole, copper strip, copper plate earthing complete in all respect for MPS and IPS .

Copper earthing of all PV modules mounting structures including copper strip, copper plate earthing complete in all respect for MPS and IPS.

Pipe fitting with 32 mm dia size GI pipe, Gate valve, Reflex valve, GI union, elbow, nipple, Tee etc complete as required at for MPS and IPS .

Installation, testing & commissioning of all above supplied Items for MPS and IPS .

Watch and ward of the solar pumping scheme for 12 Months during stabilization at each pumping station with data transmission at portal as per Department's requirement after Three months trial run period of the scheme.(MPS, IPS)

VERSATILE (BID ID -377500)