Dismantling and erection of tilted and damaged pole and painting of poles of HT overhead line from Kuju substation to pundi substation at pundi project under Kuju Area.

Amount

Errection of tubular pole of length exceeding 10 M but not exceeding 12M in cement concrete 1:3:6 (1 cement 3 coarse: 6 graded stone aggregate 40 mm nominalsize) foundation including excavation & refiling etc as required

Erection of All alluminium conductor of 7/1.96 to 7/4.0 mm dia and above including binding etc as required. 8 Span x 0.394 Kg/M (DOG) x 50 M x 3 wire

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle(20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.l. pin, nuts, washers etc. as required. For replacement of damaged pins insulator in complete Overhead line

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolls, nuts, washers etc. as required. For replacement of damaged disc insulator in complete Overhead line

Supply & installation of Aluminum armoured cable single core 1100 voltage grade 35 sq mm. for earth connection. 15 X 15 Mtrs.

Supplying and fixing crimping type alum.lugs as per I.S.S. specification suitable for following size of cable with alu./copper Solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B. /М.С.В. etc. as required complete. 35 Sq.mm. size for Earthing connection

Supply and erection of 65mm * 65mm * 6mm angle for rabit conductor erection for earth continuity. 0.5 M x 90 no. 45 Mtrs. Weight = 45 M * 5.91 = 265.95Kg

Supply and erection of D Clamp of size as per requirement for angle erection (Cost- 61.2 + 10% labour = 67.32)

MS Nut and Bolt Size- As required

Erection of All alluminium conductor of 7/1.96 to 7/4.0 mm dia and above including binding etc as required. (Erection of Rabbit conductor for Earth continuity (214Kg / K * M) *214^ * 4.5KM)

Dismantling of pole/street light standard/strut embeded in cement concrete etc as req.

Dismantling of O.H. lines comprising of copper/ alluminium O.H. conductor GI wire, cross arms, insulator etc as req. 8 Span x 0.394 Kg/M (DOG) x 50 M x 3 wire + 50 KG for cross arm, cross bracing e.t.c

Supply of 8 swg G.I. wire for cradling. 4 wire cradling-50M*4 wire 4 cradling + 1.5M*100 no. 4 cradling = 1400 Mtrs. Weight = 0.103 Kg/M1400144.20Kg

Erection of G.I. Wire No. 8 SWG including binding etc. as required. 50M*4 wire*4 cradling = 800 Mtrs. Weight= 800*0.103

Erection of cradle guard as required. 100 no. 4 cradling

Painting of Tubular pole of Length 11 M (130 Nos.) including painting of cross brace and cross arms. Total painting area= Pole-130 * 9.04 + SP cross arm- 47 * 0.62 + DP cross arm- 51 x 2 x 0.62 + Cross brace -1 x 2.12

Nubering of Pole with black Japan paint. For 130 Nos. of pole and 6 letters of height 1 inch (2.5cm) on each pole (pole no. and voltage rating). Total letter per centemetr -130 x 6 x 2.5 = 1950

Supply and fixing of 6" X 6", Danger plate (for 3.3KV, with all the neccessary information displayed on it) and barbed metal wire fencing for anti-climbing (Danger Board -1 No Clamp with bolt 4 set Barbed Metal Wire - 10 Ft.)

Supply and Fixing of 1 inch width, Fluorescent tape - Hot Pressure Yellow Color at two point in each pole (0.25Mtrs x 2 x 130 pole)

Total impact of GST for the purpose of CTC

Maa Enterprises (BID ID -1153983)