Supply hand tools and Machinery

Electronic Mechanic

Connecting screwdriver 10 X 100 mm -Connecting screwdriver 100 mm slim insulated with plastic handle 3mm tip

Neon tester 500 V. - A good quality CRYSTAL HANDLED 3 X 150mm slotted test pen screwdriver having capability of energizing the neon lamp when powered up and capable of testing voltage range upto 500 V AC

Screw driver set Set of 7 - Standard Screw Driver Set of 7 pieces having length 100 mm ,150 mm,200 mm, 250 mm, 300mm, 400mm, and 450mm respectively with non slip handle.

Insulated combination pliers 150 mm - Standard Quality Combination Plier having Length of 150 mm and properly insulated with good quality insulating material

Insulated side cutting pliers 150mm - Standard Quality Side Cutting Plier having Length of 150 mm and properly insulated with good quality insulating material

Long nose pliers 150mm - Standard Quality Long Nose Plier having Length of 150 mm and properly insulated with good quality insulating material

Soldering iron 25 Watt, 240 Volt - Standard Soldering Iron ISI Marked of Power rating of 25 Watts 230 V respectively

Electrician knife 100 mm - A electrician knife made up of Stainless steel and a large blade ,electrician sheepfoot blade and a wire scraper.

Tweezers 150 mm -A good quality tweezer of 100 mm length made up of Stainless Steel straight tipped throughly covered with the insulating material

Digital Multimeter (3 3/4 digit) ,4000 Counts - Handheld Digital Multimeters 3 ½ Digit with backlight LCD display incorporating latest technology can measure AC Voltage, DC Voltage, DC Current, AC current, Resistance, Capacitance, Temperature, Battery Test Voltage and Frequency. and can perform Diode Test, Transistor Check, Continuity check, Low Battery display, Data Hold and Auto Power Off and having a built in holster for anti-sliding and confirming to CAT IV 600V.

Soldering Iron Changeable bits 15 Watt, 240 Volt -A good quality changeable bit of Soldering iron having power rating of 10 W

De- soldering pump electrical heated, manual operators 230 V, 40 W - A quality desoldering pump having spring loaded retractable piston and having a antistatic tip and body made up of high grade plastic or aluminium

Precision set of screw drivers T5, T6, T7 - A precision set of Screwdrivers T5,T6,T7 conforming to following specifications with a cushioned grip handle. Size Point-to-point distance Inch MM T5 0.055 1.42 T6 0.066 1.70 T7 0.078 1.99

Tweezers – Bend tip - A good quality tweezer 100 mm long made up of Stainless Steel bend tipped throughly covered with the insulating material

Steel measuring tape 3 meter A Standard Steel measuring tape of 3 Metre Length enclosed in a case and can be rearranged in a PVC/Metallic case .

Crimping tool (pliers) 7 in 1 - A hand operated crimping tool for crimping of cables sizes of upto 16 sq. mm respectively

Magneto spanner set 8 Spanners - A standard forged magneto spanner set of 8 spanners, spanner size ranging from 6 mm to 19 mm

File flat bastard 200 mm - A Standard Flat File long Bastard Type made up of HCS having dimensions of 200 X 20.6 X 5 mm (LX W XT) and handle made of red coloured sheesham wood or good quality plastic

File flat second cut 200 mm - A Standard Half round File second cut type made up of HCS having dimensions of 200 X 20.6 X 5 mm (LX W XT) and handle made of red coloured sheesham wood or good quality plastic..

Allen Key set of 12 pieces 2mm to 14mm - 4 setsChrome Vanadium Steel Champhered Heads Proper Heat Treatment 48-52 HRC Make-any reputed company having ISO Certification

Tubular box spanner Set - 6 - 32 mm - Tubular box spanner (set of 6nos) with tommy bars ,hexagon shaft and holes , for turning either with spanner or tommy bar of sizes 6 x7,8X9,10X11,12X13,14X15,16X17 (mm)

Magnifying lenses 75 mm - Diameter of 75mm glass lens(3 inches),200m , 5x magnification optical material : glass , size of lense with frame needs to be of - 14.5x 7.5cm minimum

Continuity tester - A Good quality Continuity tester having audible indication and LED indication ,short response time

Hacksaw frame adjustable 300 mm - Standard Hacksaw frame made of Steel or Iron suitable for 30 cm blade fitment(maximum).

Chisel - Cold - Flat 10 mm X 150 mm - Cold chisel made of High Carbon Steel (HCS) having dimension of 250mm Long X 20 mm

Scissors 200mm - A straight cut scissor made up of stainless steel having a overall length of 200mm.

Handsaw 450mm Hand Saw - 450 mm - A Hand saw of 450 mm blade length made up of High Carbon Steel and handle made up of wood or plastic.

First aid kit (Box with related accessories, no medicine is required)

Bench Vice Bench Vice - 125 mm , Bench Vice Bench Vice - 100 mm , Bench Vice Bench Vice - 50 mm

Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 30 Amp - A Battery Charger which provide output ranging from 12V to 24 V and Current ranging from 3Amp to 15 Amp with overload protectionand built in ammeter & Voltmeter

Analog multimeter (A quality Analog multimeter which can measures AC / DC Voltage up to 2500V, AC/DC Current up to 10A, Resistance up to 10M.Ohms, Diode and continuity test facility and having the facility of testing Active and Passive components)

Clamp meter 0 - 10 A

Dimmer starter 3 Amps - (Dimmerstat having max current range -3 Amps for voltage range from 0- 270 v AC suitable for single phase continuos operation)

Autotransformer 15 Amps

Milli Ammeter (AC) 0 – 200 mA

Milli Ammeter (DC) 0 – 500 mA

Computers in the assembled form (including cabinet, motherboards, HDD, DVD, SMPS, Monitor, KB, Mouse, LAN card, Blu-Ray drive and player), MS Office education version. - Latest PC 4th Genration(Intel i7 microprocessor ,3.4 GHz,8 MB cache with 4 GB Ram and 1 TB Hardisk ,Wifi enabled ,USB optical mouse,multimedia key board LED and 23" LED Monitor ,Standard ports and connectors ,DVD Writer ,Speakers and Mic wih window 8.1 and antivirus preloaded

Laptops latest configuration - 4th Generation intel i7 processor(3.4 GHz, 8 MB Cache with4 GB RAM, 1 TB harddisk, wi-fi enabled, USB optical mouse, 15"LED Screen , Standard ports and connectors, DVD Writer, inbuilt Speakers and Mic. with web camera with preloaded licensed window 8.1 or latest operating system and latest internet security input. preloaded licensed latest version MS Office

Laser jet Printer -- Work group printer - Laser - Laser - Monochrome - Monochrome Legal (8.5 in x 14 in) A4 (210 x 297 mm) A4 (8.25 in x 11.7 in) Legal (216 x 356 mm)Printer / Interface USB, minimum speed 30 PPM, Print Quality: Upto 2400x600 dpi with automatic image refinement. Prinet Resolutioin: Upto 600x600 dpi, having option of double sided printing, Automatic, Memory: minimum 16 MB.

INTERNET BROADBAND CONNECTION -- A Broad band Connection with all the accessories like modem ,ADSL splitter etc and wiring suitable for easy access to the place of PC

Electronic circuit simulation software with 6 user licens - Circuit Design and Simulation Software with PCB Design with Gerber and G Code Generation, 3D View of PCB, Breadboard View, Fault Creation and Simulation.-Electronic circuit simulation software MULTISIM or SIMETRIX latest with 6 user licenses

SMD Soldering & De soldering Station with necessary accessories - A SMD soldering and desoldering station with following accessories Power Consumption: 20W Pump Type: Diaphragm pump Air flow rate: 24 L/min (max) and high precision air and heat control for welding and removing with security and reliability, anti-static design (prevents PCB from being damaged by static electricity or current leakage) with up to 320W power consumption.

DOL starter - A DOL Starter enclosed in a metallic box powder coated capable of starting the motor of upto 0.25 HP having indiviual indicators for POWER ON,MOTOR ON,MOTOR TRIP with EMERGENCY STOP SWITCH and protection against Voltage Surge

AC Motor Trainer Kit ¼ HP motor Single Phase Contactors Relays MCB DOL Starter

AM/FM Commercial radio receivers - Specifications: Telescopic Anteena of 2 Feet minimum length Frequency of Operation: AM Band 500 KHz to 1750 KHz FM Band 88MHz -108 MHz Ground plane required: None AM capture length: 300 inches AM / FM Band Separator Performance: FM rejection in AM band: > 50 dB AM rejection in FM band: > 60 dB AM/FM Pass-band loss: < 1dB AM load impedance: 300 ohms FM load impedance: 75 ohm

Microcontroller kits (8051) along with programming software (Assembly level Programming) - Core 8051, ready to run programmer for AT89C51/52 & 55, programming modes Key Pad and PC circuits Detailed learning content through simulation Software. Microcontroller kits (8051) along with programming software (Assembly level Programming)

Application kits for Microcontrollers 6 different applications 1. Input Interface : 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch 2. Display Module 16X2 LCD, Seven Segment, LED Bar Graph 3. ADC/DAC Module with most popular DC/DAC0808 4. PC Interface: RS232 & USB 5. Motor Drive: DC, Servo, Stepper 6. DAQ: Data Acquisition to sense different sensors signals Application kits for Microcontrollers 6 different applications

Various analog and digital ICs useful for doing project works mentioned in the digital and analog IC applications modules

Different types of electronic and electrical cables, connectors, sockets, terminations. -- A mixture of electical cables of 2C X 1.5 Sq.mm or 2C X 1 Sq.mm like flexible cables,armoured and unarmoured cables of length having approximately 10 Ft. A mixture of electronic cable of single core to 12 core having different colour coded having length of each type tentatively -1 Metre Connectors ,sockets and termination material (like Lugs,Insulating tape

Fiber optic communication trainer -- Full Duplex Analog & Digital Trans-receiver with 660nm & 950nm, Noise Generator with variable gain, Four Seven Segment Display BER Counter, Eye Pattern. Fiber optic communication trainer having following SPECIFICATION Transmitter : 01 no. Fiber Optic LED Receiver : 01 no. Fiber Optic Photo detector Modulation Techniques : 1. AM 2. FM 3. PWM. Drivers : 01 no. with Analog & Digital modes PLL Detector : 01 no. Provided. Comparator : 01 no. provided. Analog Bandwidth : 350 KHz. Digital Bandwidth : 2.5MHz. Function Generator : 1 KHz Sine wave (amplitude adjustable). 1 KHz Square Wave (TTL). Fiber Optic Cable : 02 nos of different Lengths viz: a. 0.5 meter & b. 1 meter (with standard SMA type connector). Cable Type : Step indexed multimode PMMA plastic cable. Power Supply : 230V + 10% VAC, 50 Hertz, single phase. Accessories Included : Detailed Instruction Manual,Microphone, Headphone, Set of 8 assorted multicoloured multistrand wires with 4 mm plug terminations at both ends having different test points to observe the waveform and measure other parameters

SMPS of different make SMPS of following type . D.C. to D.C. Converter: · Forward Converter: · Flyback Converter: · Self-Oscillating Flyback Converter of different make

UPS 3 KVA with backup time minimum 30 minutes -- A quality inline UPS of 3 KVA having surge protection a ,fault indications,circuit diagram printed ,Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time,Resettable circuit breakers, along with batteries for providing the back up of 3KVA for 30 minutes along with the connecting leads,rack for batteries and for UPS

Smart phones of different make (android/Windows) -- A latest quality smartphones as available in the market for windows and android platform

Cell phone power source with charger chords for different cell phones - A quality Cell phone Charger/Power source with the different ports for charging of different type of cell phones

LCD TV (Trainer kit ) 21-inch full HD LCD Color Television should support PAL/ NTSC video formats Complete block diagram of a LCD TV system, Study board indicating various sections of LCD TV along with the test points and switch faults LCD TV Trainer kit having following features 1. The block diagram should be printed on single PCB. 2. Fault creation facilities should be provided by switches. 3. Section wise different colored screen printed circuit should be on the PCB for easy understanding of functions of different sections. , 4. Typical ICs should be provided on sockets. 5. Explanation, Observation, Alignment and adjustment of internal and External controls should be possible at a glance . 6. Having the facility of easy measurement of Voltages and observation of waveforms at any point. Also typical voltages and waveforms should be printed on the kit. and conforming to following specifications A1. Display : 21”Diagonal Size ,Flat panel display / TFT active matrix, Max Resolution : 1280 x 1024 Aspect ratio : 4:3 or other compatible 2. Image : - Image Brightness : 300 cd/m2 , Image Contrast Ratio : 1000:1 (minimum) , Image Max H-View Angle : 160 , Image Max V-View Angle : 160 , 3. Interface : - Analog Video Input : RGB VGA (HD-15) , Analog Video Input : S-Video , Composite Video Input : RCA Yellow, Audio Input : RCA- Left (White), Right (Red) Antenna RF Input : RF - SDTV/ PAL, USB and HDMI interface 4.. On Screen display : Volume, Brightness, Contrast, Color, Channel, Tuning. 5. Remote Control functions : On screen display of Volume, Brightness, Contrast, Channel 6. Audio Amplifier : 3 W PMPO 7. Power supply : 230V AC, 50 Hz.

LCD TV (21”) A quality LCD TV based on latest techoology of Screen size 21 inch having Native Display Resolution of 1920 x 1080 and Contrast Ratio (DCR) of 100,000:1 and Response Time of 4 ms ,Aspect Ratio of 16:9 with the Aspect Ratio correction and screen size of 21 inch with inbuilt speakers dolby surround sound and having the facility of HDMI and USB connectivity having RS232 and HDMI ,USB port connectivity.

LED TV (Trainer kit ) 20-inch full HD LED Color Television, PAL/ NTSC video formats, complete block diagram of a LED TV system , Study board indicating various sections of LED TV along with the test points and switch faults Trouble shooting in different sections.LED TV Trainer kit having following features 1. The block diagram should be printed on single PCB. 2. Fault creation facilities should be provided by switches. 3. Section wise different colored screen printed circuit should be on the PCB for easy understanding of functions of different sections. 4. Typical ICs should be provided on sockets. 5. Explanation, Observation, Alignment and adjustment of internal and External controls should be possible at a glance . 6. Having the facility of easy measurement of Voltages and observation of waveforms at any point. Also typical voltages and waveforms should be printed on the kit. and conforming to following specifications A1. Display : 21”Diagonal Size ,Flat panel display / TFT active matrix Max Resolution : 1280 x 1024 Aspect ratio : 16:9 and other compatible 2. Image Image Brightness : 300 cd/m2 Image Contrast Ratio : 1000:1 (minimum) Image Max H-View Angle : 160 Image Max V-View Angle : 160 3. Interface Analog Video Input : RGB VGA (HD-15) Analog Video Input : S-Video Composite Video Input : RCA Yellow, Audio Input : RCA- Left (White), Right (Red) Antenna RF Input : RF - SDTV/ PAL USB and HDMI interface 4.. On Screen display : Volume, Brightness, Contrast, Color, Channel, Tuning. 5. Remote Control functions : On screen display of Volume, Brightness, Contrast,

LED TV (21”) A quality LED TV based on latest techoology of Screen size 21 inch having refresh rate of 100 Hz clear motion rate ,active noise reduction facility,aspect ratio of 16:9 with the facility of aspect ratio correction having down firing and full range speakers and having the facility of HDMI and USB connectivity having RS232 and HDMI ,USB port connectivity.

Home theatre system -A good quality 4.1 Home thetre system i.e with 4 speakers and 1 woofer having the functions uch as Built-in FM Radio,LED Display, Fully Functional Remote Control Supports SD / MMC Memory Cards & Pen Drives

Solar Training Kit/ Simulator With built in meters for DCV, DCA, AC multifunction Meter (for ACI, ACV, Power, Frequency), Protection Circuits, BS-10 terminals for making the connection, Single/ Dual axis tracking system Charge Controller : PWM based MPPT, Charging Stage : Bulk, Absorptions and Float

LED lighting system Measurement of Power, Voltage, Current, Power Factor and Light output performance of different lighting products like LED, CFL at variable input voltages 0 to 245V variable AC -A LED lighting system compomising of following LED Bulb 3W,6W,9W,12W Power rating

ADVANCE INSTRUMENTS

DELTA TECHNOLOGIES

SUSHAMA ELECTRONICS

M/S. P. C. SOLUTION

SUSHAMA ELECTRONICS

UNITECH CORPORATION

DELTA TECHNOLOGIES