Repair and Renovation of Technical Service Department Office Room and Veranda area at FACT CD, Ambalamedu, Kochi.

Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl. instructions

Labour charges for dismantling carefully the existing ceiling /partitions with AC sheets, Plywood / Hardboard /wood etc and stacking them for reuse as per deptl.instructions.

Providing and laying glazed vitrified floor tiles(GVT) with approved brand and size 1200x600mm or nearest available size (thickness to be specified by manufacturerer with water absorption lessthan 0.08% and cofirming to IS 15622 and fixing floor tiles with cement based high polymer modified quick set tile adhessive(Water based)confirming to IS 15477 in average 3mm thickness and grouting the joints of flooring tiles having joint of 3mm width using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardner and 0.20kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer in charge.

Providing and fixing vitrified floor tiles with water absorption less than 0.08% and conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for skirting (height 10cm) to walls over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm with adequate joint spacing of 3mm followed by grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge, excluding cost of cement.

Scrapping old paint and Cleaning all surface by Jet Pressure pump of fresh water, removing all fungus, vegetation, Algae & Opening crack by grinder in 'V' shape up to 3mm, cleaning, 1 coat primer & filling all cracks by crack seal, finishing , Cleaning the surround surface etc. as per manufacturer specification.

Painting one coat of priming coat on plastered surface (interior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Supplying and fixing anodized Aluminium frame work of extruded sections and approved brand / manufacturer including mitering the joints, fixing the frame work with necessary screws, drilling holes in floors/walls, providing plugs for fixing screws, finishing the sides of packing between frame work and walls with plaster of Paris, cost of timber packing if necessary, Rubber lining for air tightness, providing corner cleats etc.complete as per standard practice for glazed Doors, Windows, Partitions, Ventilators etc.including hinges ,pivots, tower bolts, fixtures etc.complete(All Aluminum fittings measured in Kg)

Glazing the Aluminium frame work of windows with 3 mm or nearest thick plain glass panes and anodized Aluminium approved brand beadings, with EPDM / NEOPRINE weather seals, gaskets of EPDM or PVC etc and screws as per standard practice at all levels (Measurement for overall area of doors / windows / ventilators)