Construction of New Hostel building for (Boys 240 student Type-02), Higher Secondary School (Boys) Science Stream building and upgradation of Secondary School Second floor building in Adarsh Nivashi School campus at village Tejgadh Ta. & Dist. Chhotaudepur

Construction of New Hostel Building for ( boy's 240 student Type - 02 ) , Higher Secondari School ( boyes )

Science Stream Building And Upgradation of Secondary school Second floor Building in Addrsh Nivashi

School campus at village Tejgadh Ta. Dist Chhotaudepur

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.50mt. depth including 2950.00 CuM 125.86

sorting out and stacking of useful materials and disposing

of the excavated stuff upto 50 metre lead etc. complete in (

A ) loose or soft soil

2 Excavation for foundation 1.50mt. To 3.0mt depth 2215.00 CuM 175.32

including sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50 metre lead etc.

complete in ( B ) Dense or hard soil

3 Providing and laying Cement Concrete work M-150 and 329.00 CuM 4212.71

curing complete including cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

4 Providing and laying controlled cement concrete M.250 1659.50 CuM 4770.72

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns and

5 Providing and laying controlled cement concrete M.250 55.00 CuM 7916.38

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts, upto ground

6 Providing and laying controlled cement concrete M.250 228.00 CuM 5975.16

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in plinth beams

7 Providing and laying controlled cement concrete M.250 42.00 CuM 6681.15

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in plinth Web beams

8 Filling available excavated earth ( excluding rock ) in 1188.00 CuM 137.47

trenches, plinth sides of foundation etc. in layers not

exceeding 20cm in depth consolidating each deposited

layer by ramming and watering.

9 Brick work using common burnt clay building bricks 340.00 CuM 4301.32

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) (B) Conventional

10 Filling in foundation and plinth with murrum or selected 2139.00 CuM 304.60

soil in layers of murrum or selected soil in layers of 20 cm

thickness incl. watering, ramming and consolidation etc

11 Filling in plinth with sand under flooring including 422.00 CuM 489.28

watering, ramming and consolidating dressing etc.

Item Description of Item Quantity Unit Rate In Amount

12 Providing and Fiilling light wight brocan CLC /AAC block 71.00 CuM 5190.39

aggregat 20 to 40mm size, light wight including 20 mm

thick water proof cement plaser in CM 1 : 3 ( 1 Cement :

Coaurce sand) including waterin laying the filling material

13 Applying general insecticide pest control treatment to 2055.00 SqM 49.25

floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SCa Per 6313 pests -III (

0.075% Consentration by mass ) is recommended 10.5 ml

chemical emulsion dillute with 5 liter of water applicant

0.5 liter chemical / Sqm of surface is recommended as per

14 Providing and laying cement concrete 1:4:8 (1cement : 4 670.88 CuM 3095.33

coarse sand : 8 B.T. stone aggregates 40 mm. nominal size)

and curing complete excluding cost of from work in : (a)

Foundation and plinth

15 Providing and laying controlled cement concrete M.150 288.00 CuM 4222.81

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in plinth slabs

16 Providing and laying controlled cement concrete M.200 89.00 CuM 7945.41

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts, upto floor

two level. Ground floor

17 Providing and laying controlled cement concrete M.200 77.00 CuM 7912.35

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts, above floor

two level. first floor

18 Providing and laying controlled cement concrete M.200 84.00 CuM 7952.76

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts, above floor

two level. Second floor

19 Providing and laying controlled cement concrete M.200 24.00 CuM 7993.17

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts, above floor

two level. Third Floor

20 Providing and laying controlled cement concrete M.200 113.00 CuM 6257.96

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams upto floor two level. Ground floor

21 Providing and laying controlled cement concrete M.200 113.00 CuM 6298.37

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams above floor two level. First floor

22 Providing and laying controlled cement concrete M.200 217.00 CuM 6338.78

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams above floor two level. Second floor

Item Description of Item Quantity Unit Rate In Amount

23 Providing and laying controlled cement concrete M.200 13.00 CuM 6379.19

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams above floor two level. Third Floor

24 Providing and laying controlled cement concrete M.200 44.00 CuM 6758.92

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in web beams upto floor two level. Ground floor

25 Providing and laying controlled cement concrete M.200 44.00 CuM 6799.33

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in web beams above floor two level. First floor

26 Providing and laying controlled cement concrete M.200 58.00 CuM 6839.74

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in web beams above floor two level. Second floor

27 Providing and laying controlled cement concrete M.200 142.49 CuM 6182.21

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs upto floor two level. Ground floor

28 Providing and laying controlled cement concrete M.200 131.00 CuM 6222.62

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs above floor two level. First floor

29 Providing and laying controlled cement concrete M.200 236.00 CuM 6263.03

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs above floor two level. Second floor

30 Providing and laying controlled cement concrete M.200 12.00 CuM 6303.44

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs above floor two level. Third Floor

31 Providing and laying controlled cement concrete M.200 11.00 CuM 7587.12

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (E) Staircases upto floor two level. Ground floor

32 Providing and laying controlled cement concrete M.200 11.00 CuM 7627.53

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (E) Staircases above floor two level. first floor

33 Providing and laying controlled cement concrete M.200 13.00 CuM 7667.94

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (E) Staircases above floor two level. Second Floor

34 Providing and laying controlled cement concrete M.200 15.00 CuM 7819.42

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (C) Lintels upto floor two level. Ground floor

Item Description of Item Quantity Unit Rate In Amount

35 Providing and laying controlled cement concrete M.200 14.00 CuM 7859.83

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (C) Lintels above floor two level. First floor

36 Providing and laying controlled cement concrete M.200 19.00 CuM 7900.24

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (C) Lintels above floor two level. Second floor

37 Providing and laying controlled cement concrete M.200 6.00 CuM 6933.65

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (B) Chhajja upto floor two level. Ground floor

38 Providing and laying controlled cement concrete M.200 5.00 CuM 6974.06

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (B) Chhajja above floor two level. First floor

39 Providing and laying controlled cement concrete M.200 6.00 CuM 7014.47

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (B) Chhajja above floor two level. Second Floor

40 Providing and laying controlled cement concrete M.200 2.00 CuM 7054.88

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in (B) Chhajja above floor two level. Third Floor

41 Providing and laying controlled cement concrete M.200 26.00 CuM 10719.13

and curing complete including the cost of formwork and

excluding cost of reinforcement for reinforced concrete

work in (B) Walls, above floor two level. Ground Floor

42 Providing and laying controlled cement concrete M.200 10.00 CuM 10759.54

and curing complete including the cost of formwork and

excluding cost of reinforcement for reinforced concrete

work in (B) Walls, above floor two level. First floor

43 Providing and laying controlled cement concrete M.200 10.00 CuM 10799.95

and curing complete including the cost of formwork and

excluding cost of reinforcement for reinforced concrete

work in (B) Walls, above floor two level.Second Floor

44 Providing and laying controlled cement concrete M.200 31.00 CuM 10840.36

and curing complete including the cost of formwork and

excluding cost of reinforcement for reinforced concrete

work in (B) Walls, above floor two level. Third Floor

45 Providing T.M.T bar Fe 500 D grade reinforcement for 243512.06 Kg 77.29

R.C.C. work including bending, binding and placing in

position complete upto floor two level. Ground floor

46 Providing T.M.T bar Fe 500 D grade reinforcement for 83610.00 Kg 78.36

R.C.C. work including bending, binding and placing in

position complete above floor two level. First floor

Item Description of Item Quantity Unit Rate In Amount

47 Providing and applying bitumen primer / bitumen 3015.00 Smt 116.15

emulsion spray on RCC footing, pedestal and column

surface up to plinth level as anti-termite / damp-proof

protective coating, after cleaning the surface, including

spraying with pressure distributor or hand spray, complete

as per specification and direction of Engineer-in-Charge.

48 Providing and laying rubble soling with hard broken stones 1090.99 Cmt 955.46

over prepared sub-grade, hand packed, filling voids with

spalls, watering and ramming, and providing Gravel filling

over soling And Lime Mortar 1:2 (1-lime putty/ Equivalent

dry Hydrated Lime : 2-Fine sand) , spreading, watering and

compacting, complete as per specifications and directions

of Engineer-in-Charge.

49 Supply, testing & commissioning portable diesel driven self 2.00 Nos 31172.64

priming horizontal mono dewatering pump set with four

wheel trolley, GI medium duty delivery pipes, specials,

suction strainer etc. complete set Material of

Constructions: Impeller: Bronze, Casing: CI, Shaft: Carbon

50 Providing T.M.T bar Fe 500 D grade reinforcement for 102635.00 Kg 79.43

R.C.C. work including bending, binding and placing in

position complete above floor two level. Second floor

51 Providing T.M.T bar Fe 500 D grade reinforcement for 19735.00 Kg 80.50

R.C.C. work including bending, binding and placing in

position complete above floor two level. Third floor

52 Brick work using common burnt clay building bricks 465.98 CuM 4549.21

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional in superstructure upto floor two level.

53 Brick work using common burnt clay building bricks 418.00 CuM 4611.49

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional in superstructure above floor two level. First

54 Brick work using common burnt clay building bricks 394.00 CuM 4654.26

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional in superstructure above floor two level.

55 Brick work using common burnt clay building bricks 112.00 CuM 4697.66

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional in superstructure above floor two level. Third

56 Half brick masonry in common brunt clay building bricks 499.00 SqM 696.50

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 ( 1-Cement : 4-coarse sand ) (B)

Conventional in superstructure upto floor two level.

57 Half brick masonry in common brunt clay building bricks 482.00 SqM 702.90

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 ( 1-Cement : 4-coarse sand ) (B)

Conventional in superstructure upto floor two level. First

Item Description of Item Quantity Unit Rate In Amount

58 Half brick masonry in common brunt clay building bricks 499.00 SqM 709.30

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 ( 1-Cement : 4-coarse sand ) (B)

Conventional in superstructure upto floor two level.

59 Providing 15 mm thick cement plaster in single coat on 1310.00 SqM 231.38

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) for

60 Providing 15 mm thick cement plaster in single coat on 1321.00 SqM 255.84

Rough (Similar)side of single or half brick walls for

interior plastering above floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

for First floor

61 Providing 15 mm thick cement plaster in single coat on 1175.00 SqM 280.31

Rough (Similar)side of single or half brick walls for

interior plastering above floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

for second floor

62 Providing 20 mm thick double coat mala cement plaster on 3014.00 SqM 290.88

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

complete. Ground Floor

63 Providing 20 mm thick double coat mala cement plaster on 2810.00 SqM 316.13

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

complete. First Floor

64 Providing 20 mm thick double coat mala cement plaster on 2723.00 SqM 341.38

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

complete. Second Floor

65 Providing 20 mm thick double coat mala cement plaster on 191.00 SqM 366.63

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc.

complete. Third Floor

Item Description of Item Quantity Unit Rate In Amount

66 Providing 10 mm thick cement plaster in single coat on 1889.00 SqM 228.17

ceilling and sofits of stairs and finished with Floating Coat

of neat cement Slurry for interior plastering and finished

even and smooth in (ii) Cement mortar 1:3 (1-cement :3-

sand) Ground floor

67 Providing 10 mm thick cement plaster in single coat on 1883.00 SqM 281.01

ceilling and sofits of stairs and finished with Floating Coat

of neat cement Slurry for interior plastering and finished

even and smooth in (ii) Cement mortar 1:3 (1-cement :3-

sand) First floor

68 Providing 10 mm thick cement plaster in single coat on 1972.00 SqM 303.42

ceilling and sofits of stairs and finished with Floating Coat

of neat cement Slurry for interior plastering and finished

even and smooth in (ii) Cement mortar 1:3 (1-cement :3-

sand) Second Floor

69 Providing 10 mm thick cement plaster in single coat on 66.00 SqM 325.84

ceilling and sofits of stairs and finished with Floating Coat

of neat cement Slurry for interior plastering and finished

even and smooth in (ii) Cement mortar 1:3 (1-cement :3-

sand) Thirdd Floor

70 20mm thick sand faced cement plaster on walls upto height 1745.00 SqM 418.14

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.and mixing water proofing materials of approved

brand and manufacture in cement mortar in proportion

recommanded by the manufacturer for Ground Floor

71 20mm thick sand faced cement plaster on walls upto height 1616.00 SqM 443.39

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.and mixing water proofing materials of approved

brand and manufacture in cement mortar in proportion

recommanded by the manufacturer for First Floor

72 20mm thick sand faced cement plaster on walls upto height 1926.00 SqM 467.63

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.and mixing water proofing materials of approved

brand and manufacture in cement mortar in proportion

recommanded by the manufacturer for Second Floor

73 20mm thick sand faced cement plaster on walls upto height 978.00 SqM 492.88

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.and mixing water proofing materials of approved

brand and manufacture in cement mortar in proportion

recommanded by the manufacturer for Third Floor

74 Providing throting or plaster drip moulding to R.C.C. 21527.00 Rmt 44.07

Item Description of Item Quantity Unit Rate In Amount

75 Providing & Fixing GI Chhikan mass jali at Concret & Brick 12881.00 SqM 141.40

Masanary joint including necessary nails and labour

charges for fixing befor plaster work etc completed as per

76 Providing & Fixing of Acoustical Suspended Ceiling System 1856.00 SqM 1484.70

with Fine Fissured (Bevelled Tabular) Edge Tiles With

Armstrong Silhouette 15mm Black Trivial GRID System.

The tiles should have Humidity Resistance (RH) of 99%,

NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k =

0.052 - 0.057 w/m K, Colour White, Fire Performance UK

Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x

600 x 16mm , suitable for Green Building application, with

Recycled content of 31%. The tile shall be laid on grid

system with 15mm white flanges incorporating a 6mm

central reveal in black colour and with a web height of

38mm and a load carrying capacity of minimum

Kgs/M2 & minimum pull out strength of 100 Kgs.

Silhouette, Main Runners & Cross Tees to have mitred ends

& “birds mouth” notches to provide mitred cruciform

junctions. The T Sections have a Galvanizing of 90 grams

per M2 and need to be installed with Suspension system of

Armstrong make.. The Tile & Grid system used together

should carry a 3 year warranty

77 P & L 24" x 24" Antiskit vitrified 8 mm thick tile flooring 706.00 SqM 1472.91

with Pattern as approved by architect over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface and jointed with color cement slurry

including finised with flush pointing & cleaning the surface

78 Providing and laying Antiskit Vitrified tiles 8 to 10 mm 44.00 SqM 1195.02

thick , 24'' x 24'' in skrting ,risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry for LIGHT shade as

per approved pattern by architect

79 Providing and laying polished Kota stone slab flooring over 3594.00 SqM 1633.17

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed

with grey cement slurry including rubbing and Mirorra

polishing etc. complete.(A) 25mm thick

80 Providing and laying polished kota stone slab 25mm thick 176.00 SqM 1623.07

in risers of steps, Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury including rubbing and Mirrar

polishing etc. complete.

81 Providing and laying cement concrete flooring 1:2:4 (1- 58.00 SqM 304.39

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer finished with a floating coat

of neat cement. (A) 40mm Thick

82 Providing & Laying machine cut free edge machine 159.00 SqM 2180.59

polished Granite slab 18 mm thick finished in treads &

risers with 1 cm nosing over 20mm (Avg.) base of cement

mortar 1:6 (1-Cement : 6-coarse sand) and joined with

gray cement slurry including rubbing and polishing with

necessary grooves on treads etc complete.

Item Description of Item Quantity Unit Rate In Amount

83 Providing & Laying machine cut free edge machine 73.00 SqM 2366.43

polished Granite slab 18 mm thick finished in treads &

risers with 1 cm nosing over 20mm (Avg.) base of cement

mortar 1:6 (1-Cement : 6-coarse sand) and joined with

gray cement slurry including rubbing and polishing with

necessary grooves on treads etc complete.

84 Providing and laying 30 X 30 cm MATE FINISHED 329.00 SqM 1017.30

ANTISKID Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

85 Providing and laying Premium Printed glazed tiles of the 2762.00 SqM 1523.67

size 300 mm x 600 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement slurry.

86 Providing and laying china mosic type water proofing 2359.00 SqM 832.24

treatment on tarrace including (a) applying neat cement

slurry 2.75 Kg/sqm of cement admixed with water

proofing compound after cleaning the surface (b) laying

cement concrete using brick bats 25 to 100 mm size with

50% of C M 1:5 ( 1 cement : 5 coarse sand) admised with

water proofing compound over 20 mm thick layer of C M

1:5 to required slope including rounding of junctions of

walls and slab (C) After two days of proper curing applying

a second coat of cement slurry (d) finishing ghe surface

with 20 mm thick C M 1:4 and china mosic tilling & finaly

finishing the surface with trowel with white cement slurry

(e) after finishing the whole tarace shall be flooded with

water for a period of two weeks

87 Providing and Fixing side hung doubal shutter door having 100.00 SqM 4091.51

factory fabricated standard extruded colour anodized

hollow section frame ( Jindal section no. 19552 of size

mm x 63.50 mm x 2.01 mm having unit weight 1.605 kg/mt

) including wooden inserts for durable grip of door hinges

and having 38 mm thick flush door with both the side

mm thick laminated sheet with non-teakwood edge

beading, S S Handle and Fixture colour, pattern & design of

which is to be approved by the architect.

88 Providing and Fixing side hung single shutter door having 112.00 SqM 3566.31

factory fabricated standard extruded colour anodized

hollow section frame ( Jindal section no. 19552 of size

mm x 63.50 mm x 2.01 mm having unit weight 1.605 kg/mt

) including wooden inserts for durable grip of door hinges

and having 38 mm thick flush door with both the side

mm thick laminated sheet with non-teakwood edge

beading, S S Handle and Fixture colour, pattern & design of

which is to be approved by the architect.

Item Description of Item Quantity Unit Rate In Amount

89 Providing and fixing FRP frame size 100x50 mm and 35 202.00 SqM 2087.06

mm thick FRP depress panel shutter and 3.2 mm high

dencified moulded wood fiber skin with steel hinges

having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures &

fastenings & fastener sleeve.

90 Providing and fixing window having extruded aluminum 235.00 SqM 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07

Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

91 Providing and fixing window having extruded aluminum 166.00 SqM 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg

/ Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

0.695 Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of

0.0.659 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @

wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm

x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/

Section 8948, @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

92 Providing and fixing standared extruded of alluminium 44.00 SqM 1370.91

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

:2434, @ Wt. 0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 3 mm thick Bajari

Figured adjestbale Glass louvers as details etc complete for

Item Description of Item Quantity Unit Rate In Amount

93 Providing and fixing M.S. grills of required pattern to 13345.20 Kg 116.15

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws for Plain Grill

including one coat of primer & two coats (excluding

priming coat) on new steel and other metal surface with

synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other

94 Providing and Fixing ventelater of MS Squar Hollow pipe 108.00 SqM 2211.90

40 x 40 x 5 mm size box pipe in frame of and 40 x 40 x

mm Size Horizontal MS Square pipe and fixing metal

screws etc. and two coats of Oil paint with primercomplete

or as directed.

95 Providing and Fixing ventelater of MS Squar Hollow pipe 242.00 SqM 1905.87

40 x 40 x 5 mm size box pipe in frame of and 40 x 40 x

mm Size Horizontal MS Square pipe and fixing In RCC

Perapit etc. and two coats of Oil paint with primercomplete

or as directed.

96 Plastic emulsion paint (Three coats) approved brand and 8398.00 SqM 168.97

Applying one coat of Birla (white cement based) or Asian

(acrylic lapy- putty) of manufacture and of required shade

on wall surfaces to give an even shade, over and including

a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and

also including preparing the surface even and sand

papered smooth.

97 Plastic emulsion paint (Three coats) approved brand and 5248.00 SqM 176.86

Applying one coat of Birla (white cement based) or Asian

(acrylic lapy- putty) of manufacture and of required shade

on ceiling surfaces to give an even shade, over and

including a priming coat with distemper primer of

approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface

even and sand papered smooth.

98 Finishing wall with whether proof exterior emulsion paint 6688.99 SqM 122.14

Apex on wall surface (two coats) of an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials etc. complete.

99 Providing and fixing concealed center point to wall ceiling 545.00 Rmt 660.58

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [E] 50mm.

Item Description of Item Quantity Unit Rate In Amount

100 Providing and fixing concealed center point to wall ceiling 730.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C] 25 mm.

101 Providing and fixing concealed center point to wall ceiling 160.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A] 15 mm.

102 Providing laying and jointing in true line and level U.P.V.C. 219.00 Rmt 777.10

SWR Type B pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering, & fitting

conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 75 mm diameter x 146 mm

length x 145 mm high at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pies and joints and jointed with adhesive solvent

cement including cost of all materials, for 75 mm Dia

103 Providing laying and jointing in true line and level U.P.V.C. 360.00 Rmt 666.28

SWR Type B pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering, & fitting

conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diameter x 146 mm

length x 145 mm high at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pies and joints and jointed with adhesive solvent

cement including cost of all materials ( B ) 110 mm

104 Providing, laying and jointing in true line and level 160 mm 245.00 Rmt 834.38

dia UPVC SWR Type B-type conforming to IS-13592-1992

with one end plain and other end socketed with rubbering

and fitting conforming to ISI-14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using PVC clamp of the size 160 mm dia X 210 mm

lenght X 196 mm high at every 2000 mm c/c or shall be

concealed in walls as directed incl. necessary fitting such as

bends, shoes etc. incl. testing of pipes and joints and jointed

with adhesive solvent cement incl. cost of all materials

105 Providing and fixing to wall ceiling and floor 10.0 Kg. 1016.00 Rmt 404.71

F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110 mm

Item Description of Item Quantity Unit Rate In Amount

106 Providing and fixing PVC SWR Nahni trap IS 14735 for 95.00 Nos 600.23

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

107 Providing and fixing S.W. gully trap with C.I. grating brick 21.00 Nos 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

108 Providing and laying (to level or slopes) and jointing with 440.00 Rmt 352.74

stiff mixture of Cement Mortar in proportion 1:1 Selt

glazed stoneware pipes including testing of pipes and

joints complete with Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size)

bedding for stoneware pipes of following internal

diameters with necessary formwork and curing

complete.(B) 100 mm dia. (112mm Ave. bed thickness)

109 Providing and laying (to level or slopes) and jointing with 400.00 Rmt 531.19

stiff mixture of Cement Mortar in proportion 1:1 Selt

glazed stoneware pipes including testing of pipes and

joints complete with Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size)

bedding for stoneware pipes of following internal

diameters with necessary formwork and curing

complete.(B) 150 mm dia. (166mm Ave. bed thickness)

110 Providing and fixing PVC SWR vent cowl of 75 mm dia. To 11.00 Nos 36.68

the pipe etc complete

111 Providing and fixing PVC SWR vent cowl of 110 mm dia. To 11.00 Nos 46.95

the pipe etc complete

112 Providing and fixing washbasin with single hole for pillar 41.00 Nos 3338.05

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x 400mm size. (i) In white colour including C.P. brass

waste pipe of 32 mm dia, M I Fisher union of 32 mm dia,

PVC braided supply pipe and brass screw down stop tap of

15 mm dia with all necessary fittings etc. complete as

113 Providing and fixing wash down water closet (European 44.00 Nos 2308.86

type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (A) vitreous China Pattern : (i) in white colour

including plastic seat cover , jet spy with SS Braided hose

60 cm long and 15 mm dia C.P. angle cock with all

necessary fittings etc. complete as directed

114 Providing and fixing water closet squatting Pan (Indian 19.00 Nos 1493.32

type W.C. Pan) size 580mm With pair of white vitreous

China 250mm x 130mm x 30mm footrest in Cement Mortar

1:3 (1-Cement : 3-coarse sand) to (I) Long pattern = White

colour Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the trap with

the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-

Fine sand) (A) Vitreous China.

Item Description of Item Quantity Unit Rate In Amount

115 Providing and fixing Urinal or approved quality including 24.00 Nos 1409.96

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

260mm x 350mm. Including wasre pipe of dia 32 mm with

all necessary fittings etc. complete as directed

116 Providing and fixing Gun metal check or non-return 20.00 Nos 420.63

fullway wheel valve. (C) 25 mm dia.

117 Providing and fixing Gun metal check or non-return 23.00 Nos 1111.00

fullway wheel valve. (E) 50mm dia.

118 Providing and fixing screw down bib taps of following 278.00 Nos 186.83

size.(B) Brass chromium plated screws down Bib Tap. (i)

119 Providing and fixing pillar tap, capstan head, screw down 51.00 Nos 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

120 Providing and fixing 600mm x 450mm beveled edge 45.00 Nos 859.41

mirror of superior glass mounted on 6mm thick A.C. sheet

or ply wood sheet and fixing to wooden plugs with C.P.

brass screw and washers.

121 Providing erecting and fixing double coated Syntex PVC. 28000.00 Liters 3.95

(ISI) water tank of required capacity each with all

necessary fittings and connection etc. complete on terrace.

122 Providing and fixing Stainless steel hand rail made from 141.00 Rmt 1201.90

anticorrosive 304 grade SS pipe of 50 mm dia (16 Gauge)

at upper portion of RCC parapet wall and using stainless

steel supports fitted in parapet wall at every 1.0 mt

distancewith 32 mm dia vertical connecting SS pipe

including SS dish type cover and accessories as directed

123 Providing and fixing 90 cm high Stainless steel railing 170.00 Rmt 2367.44

made from anticorrosive 304 grade SS pipe of 50 mm dia

(16 Gauge) as hand rail with 32 mm dia (16 Gauge)

baluster 304 grade SS as a vertical support fixed in RCC

slab / steps of stair at 1.2 Mt. c/c including three horizontal

S.S. pipe of 16mm dia (16 Gauge) at equal distance fixed by

16mm dia (16 Gauge) S.S. pipe with baluster including

accessories as per Detail and directed etc. complete.

124 Providing & fixing in position 300 mm high, 150 mm wide 110.00 Nos 1212.00

English / Gujarati letters made from 1.0 mm thick stainless

steel sheet as directed by engineer in charge with all

necessary tools & plants etc complete.

125 Providing & fixing in position 150 mm high English / 1688.00 Nos 656.50

Gujarati letters made from 1.0 mm thick stainless steel

sheet as directed by engineer in charge with all necessary

tools & plants etc complete.

126 Providing and fixing CAPCELL HD - 100 pre-moulded 47.00 SqM 1330.92

compressible filler board in black colour confirming to

MORT&H Specifications (Clause 1015), having minimum

density 95 kg/cum.metre, non-staining with less than 1%

water absorption & compression recovery of 93%

minimum as per specification for 40 mm wide expansion

joint including cutting to required size and shape at all

levels etc. complete as directed.

Item Description of Item Quantity Unit Rate In Amount

127 Providing and laying and fixing 50 mm thick expansion 45.00 SqM 1491.03

joint by hydro cell semi rigid UV resistance with high

performance laminated closed cell polythene foam joint

filler in sheet foam as directed, etc. complete.

128 Providing and fixing 25 cm Wide & 3mm thick exterior 81.00 SqM 1054.34

composite panel on existing expansion joint horizontally &

vertically with all material, hardware, acessories & fittings

129 Providing and fixing pre-cast Rubber Dye/steel Dye inter 1243.00 SqM 707.55

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and

as per approved design confirming to IS 15658:

ncluding 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 2018 etc. complete.

130 Providing and fixing pre-cast concrete kerb stone of gray 1025.00 Rmt 374.93

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

131 Providing And Fixing Machine Cut , Free edeges Machine 1016.00 SqM 3537.02

polished Green Marble Stone Slab 18 mm Thick ( Single

Piece not More Than 150 Cm ) FOR Door / Windows cill

And jambs as per design including full moulded round

Front edge and 1 cm noising and laid on 20 mm thick

cement mortar 1:6 ( 1 Cement : 6 Coarse Sand) jointed with

grer cement Slurry including rubbing and polishing

finishing etc Comp.

132 Providing & fixing sandwich type platform using 25 mm 52.00 Rmt 3831.94

thick polish kota stone at bottom and 16 mm to 18 mm

thick granite stone at top and face patta (Maxi 3.00 mt long

in single pieces) using C.M. 1:4 (1-cement :4 sand) beading

65 cm width and 75 cm high resting on 25 mm polished

kota stone bedded with cement mortar 1:4 (1-cement :4

sand) 4 cm thick sandwich incl. fixing granite stone and

cutting the stone and rounding the edge etc. complete as

133 Providing and fixing SS sink Glosy ASIS 304 Grade X 1.00 9.00 Nos 1688.72

mm thick with over all size 510 X 432 mm and Bowel 445 X

365 X 165 including C.P. brass waste pipe of 32 mm dia, M I

Fisher union of 32 mm dia and brass screw down stop tap

of 15 mm dia with all necessary fittings etc complete as

Item Description of Item Quantity Unit Rate In Amount

134 Constructing brick masonry chamber for underground C.I. 73.00 Nos 3132.34

Inspection chamber and bends with bricks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

135 Providing laying (to level or slopes) and jointing reinforced 470.00 Rmt 678.03

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends

prepared for collar joints including testing of joints

complete.(D) 300mm

136 Providing and laying controlled cement concrete M.200 70.00 Cmt 7993.17

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams upto floor two level. Ground floor (For

137 Providing and laying controlled cement concrete M.200 50.00 Cmt 6257.96

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams above floor two level. First floor (For

138 Providing and laying controlled cement concrete M.200 7.00 Cmt 6298.37

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in beams above floor two level. Second floor (For

139 Providing and laying controlled cement concrete M.200 5.00 Cmt 6338.78

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in web beams upto floor two level. Ground floor (For

140 Providing and laying controlled cement concrete M.200 5.00 Cmt 6379.19

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in web beams above floor two level. First floor (For

141 Providing and laying controlled cement concrete M.200 68.00 Cmt 6758.92

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs upto floor two level. Ground floor (For

142 Providing and laying controlled cement concrete M.200 65.00 Cmt 6799.33

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs above floor two level. First floor (For

Item Description of Item Quantity Unit Rate In Amount

143 Providing and laying controlled cement concrete M.200 4.00 Cmt 6839.74

and curing complete including the cost of formwork but

excluding cost of reinforcement for reinforced concrete

work in slabs above floor two level. Second floor (For

144 Providing & Laying machine cut free edge machine 9.00 Smt 1553.38

polished Kota Stone 25 mm thick flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing,

polishing, one eage Halfround, Grooves and anti skid Tape

50mm etc. complete.

145 Providing & Laying machine cut free edge machine 47.00 Smt 2266.44

polished Kota Stone 20 mm thick finished in treads & risers

with 1 cm nosing over 20mm (Avg.) base of cement mortar

1:6 (1-Cement : 6-coarse sand) and joined with gray

cement slurry including rubbing and polishing with

necessary grooves and anti skid tape 50mm size on treads

146 Providing and fixing standared extruded of alluminium 42.00 Smt 1525.00

section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc complete for Fix

147 Providing laying and jointing in true line and level U.P.V.C. 40.00 Rmt 338.24

SWR Type B pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubbering, & fitting

conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, including necessary fittings

such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including

cost of all materials, for 32 mm Dia

148 Providing and fixing Granit 18mm th. both side polish 11.00 Smt 2463.39

urinal Partition size 900mm x 450 with required wall

mounting hardware fixed to the wall & Granit as per the

drawings and including cutting and making good the walls

and floors wherever required etc. complete.

149 Demolition including stacking of serviceable materilas and 25.00 Cmt 1108.12

disposal of unserviceable materials with all lead and lift.

(i) R.C.C. work

150 Demolition of Brick work and stone masonry including 38.00 Cmt 576.30

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (ii) In

151 Demolition of terrace including stacking of serviceable 638.00 Cmt 66.87

materilas and disposal of unserviceable materials with all

lead and lift. (i) Brick tile covering.

152 Dismentling doors, windows, ventilators etc. (wood or 1.00 Nos 196.66

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.

Item Description of Item Quantity Unit Rate In Amount

153 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes 100.00 Rmt 78.50

with fittings and clamps including stacking the materials

with all lead and lift ( for any dia, of pipe)

154 Provinding and laying controlled cement concrete M -200 396.00 Cum 4817.70

and finishing smooth with curing etc complete, including

the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) Foundation footings,

base and column. Up to 10 tone

155 Provinding and laying controlled cement concrete M -200 14.00 Cum 6268.06

and finishing smooth with curing etc complete, including

the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Plingth Beam

156 Brick work using common burnt clay building Bricks 46.00 Cum 4310.74

Having crushing strength not less than 35 kg/sq.cm. in

foundation and plinth in cement mortar 1:6 ( 1 Cement :

Fine sand) Conventional ( up to 10 tone )

157 Providing 15 mm. Thick Cement plaster in Single coat on 490.00 Sq.mt 253.62

fair side Brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in : (ii)

Cement mortar 1:3 ( 1 cement : 3 sand) . finishing with a

floating coat of neat cement slurry including making grove

interior plastering above floor two level for G.F.

158 Providing and fixing I Sahp 1.2 meter high Wire fencing 100.00 Rmt 419.15

fixed at 2.5 m C/C with Angle posts / Square Box post

30mm x 30 mm x 5 mm and oil painting 3 coats fixed at

Mt,C/c. with four Horizontan lines in each piech at " I "

shap for vertical angle with galvanised steel barbed wire

weighting , strained and fixed to posts with G.I,staples with

fixing of approved quality green Nett with bnding on wire

of G I wires including fixing the position on wall etc

159 Box cutting the road surface to proper slop and chamber 330.75 Cum 112.02

for making a base of road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50 mts, lead.

160 Earth work for embackment including breaking clods dress 6000.00 Cum 161.68

in with all lead and lift ( execluding watering and

consolidation ) (A ) from borrow pits with in 1.00 km lead

161 Rolling And Watering of Earth Work as per directed in 6000.00 Cum 23.18

layers with power rolle including filling in depressed

whitch occure during the proces

162 Providing junction chamber for rain water recharging 25.00 No 1614.99

chamber of size 0.6 x 0.6 x 0.7m with excavation 0.1 m

thick C.C. 1:2:4 bed concrete including half brick masonary

wall in C.M. 1:4 with 15 mm thick cement plaster and

x 0.58 precast R.C.C (1:2:4)cover as per detailed drawing as

163 Providing and laying in ground 160mm dia. PVC SWR pipe 450.00 Rmt 791.84

as per IS 13592 for drainage with Excavation and

necessary requird material like solutions grip etc with fi

with necessary fittings connection as per instruction of site

Item Description of Item Quantity Unit Rate In Amount

164 Providing filter chamber of size 2.1 x 1.25 m x 1.33 m 5.00 No 11578.64

excavation, C.C. 1:2:4 bed concrete including brick work in

C.M 1:6 for 23mm thick wall & C.M 1:4 for half brick

masonary wall including 15 mm thick cement plaster &

cm R.C.C. 1:2:4 top cover & filling filter material Kapachi &

sand as per detailed drawing.

165 Providing recharging pit of size 1.2m cm x 0.9 mt x 1.2 m 3.00 No 5891.33

for water logging with excavation filling the pit with brick

bats and sand in layers including making 300mm dia. Bore

depth of 4.5 m & filling brickbats as per drawing as

166 Providing and fixing C.I. Manhole cover 0.6 M X 0.45 M size 4.00 No 958.17

having weight not less than 35 kg

167 Filling in foundation and plinth with brick bats,chhara in 22.00 Cu.m. 625.48

layers of 20 cm thickness including watering,ramming and

consolidation etc comp.

168 Providing and fixing to wall celling and floor 10.00 kg / 700.00 Rmt 339.05

Fcm2 working pressur polythen pipes of the following out

side Dia low density complet with special flange

compression type fitting wall clips including making the

good the waal celling and floor ( G ) 110 mm diameter

169 Providing and fixing to wall celling and floor 10.00 kg / 400.00 Rmt 280.24

Fcm2 working pressur polythen pipes of the following out

side Dia low density complet with special flange

compression type fitting wall clips including making the

good the waal celling and floor ( G ) 75 mm diameter

170 Providing and laying ceramic flooring 8 mm thick treads 21.39 Sq.m. 964.48

of steps and landings laid on a Bed of 12 mm. Thick cement

mortar 1:3 (1 cement : 3 coarse sand) pointing in white

ceand jointed with white cement slurry.

171 Providing and laying ceramic tiles 8 mm thick in skirting 48.25 Sq.m. 1017.48

risers of steps and dado on 10 mm. Thick cement plaster

1:3 (1 cement : 3 coarse sand) pointing in white ceand

jointed with white cement slurry.

172 Providing 15 mm. Thick Cement plaster in Single coat on 66.43 Sq.m. 253.02

fair side Brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in : (ii)

Cement mortar 1:3 ( 1 cement : 3 sand) . finishing with a

floating coat of neat cement slurry including making grove

interior plastering above floor two level for G.F.

173 20mm thick sandfaced cement plaster with Gutka on walls 89.51 Sq.m. 353.98

upto height 10 meters above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand)

and 8mm thick finishing coat of C.M. 1:1 (1cement :1 sand)

174 Distempering (two coats) with oil bound distemper of 66.43 Sq.m. 77.30

approved brand & manufacturer & of required shade on

wall surfaces to give an even shade, over & including a

priming coat with a distemper primer of approved brand &

manufacture after throughly brushing the surface free

from mortar droping & other

Item Description of Item Quantity Unit Rate In Amount

175 steel work, welded in built up sections framed work 654.00 Kg 91.08

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. A ) In beams and

joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the

176 Providing Anf fixing corrugated G.I. powedre coated sheet 174.00 Sqm 734.19

of roofing fixed with glavanished iron J or L Hooks, Bolts

and nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

177 Drilling of bore by DTH 200 mm dia in over burden and 150.00 R.mt. 176.75

175 mm dia in (A) Alluvial soil 400 mm dia A upto 100 mt

178 M.S.E.R.W. plain and pipe confirming to is 3589-1981 with 60.00 R.mt. 714.07

latest ammendment in random length of 4 to 7 mt (b) for

200 mm dia (Minimum 5.7 mm thick)

179 Bore plug having 100 mm height made from M.S.Plate with 1.00 No 83.83

3 holes of equal distance on circumference for nut Bolts

type locking arrangement with nut bolt and lock nut of

standard make complete(B)from 5 mm thick m.S.plate (For

top also)(ii) Suitable for 200 mm dia pipe

180 Clamps made from m.S. plate with 3 holes on either side 2.00 Pair 385.82

with nuts & bolts of standard make and suitable size (b)

750x75x10mm flat to 200 mm dia pipe

181 Steel bent plate suitable to ERW pipe as detailed below(B) 2.00 No 17.17

150 mm dia 150x150x5mm size

182 Development of each water bearing zones come across up 1.00 No 8478.95

to the full depth of tube well (size 200/250/300mm dia

depth more than 150mt) by lowering 100 mm dia drop line

and 32 mm dia G.I. air line to each zone with suitable

capacity of Air compressor up to the availability of sand

free discharge( W/O air compressor charge minimum

183 Charges of Air compressor (2) 600 CFM/150 PSI) 1.00 No 1025.15

184 Pumping test of the tubewell by submersible pump of 1.00 No 6363.00

adquete capacity(a) For 150 mm D.T.H. minimum 8 hour

185 Water sasmple analysis charges including chemical 2.00 No 242.40

analysis during drilling

186 Supplying Sub-mersible set suitable for bore of 150 mm dia 2.00 No 10100.00

or more having Three phase / single phase motor capacity

not more than 1.5 H.P. with 12 stage 240 LPM discharge at

104 meter head suitable for 50 mm dia.delivery pipe

187 Supplying ISI mark (Embosed) of 50 mm dia.of heavy duty 100.00 R.mt. 255.53

"C" class G.I. Pipe errecting as directed by Engineer

incharge with necessary plumbing as directed

188 Installation of accessories like bend ,top and bottom pipes 20.00 No 86.86

base plate,clamps,Reducer ,couplling etc as per

Item Description of Item Quantity Unit Rate In Amount

189 Supplying and Erecting approved make motor controlled 1.00 No 7201.30

cubical panel( direct on line) made from 16 guage CRCA

sheet dully epoxy powder painted inside and out side with

hinged doors and locking arrangements consisting of

suitable size of ON and OFF isolator (AC -3/23 duty) main

fuses,single phasing preventor,indicator lamps for R-Y-B

phase ,over loading relay,Automatic water level

controller,Ameter,Voltmeter each with two way selector

switch incoming ,wires duly socket crimped,main

controller and over load relay.Starts-stop push buttons to

be errected on angle iron frame grouted on wall as directed

.The isolator ,overload relay and connector will be of L & T

.Seimens or Cuttler Hammere make only (a) DOL up to

190 providing and erecting ISI Mark PVC insulated ,PVC 200.00 R.mt. 59.59

shethed flat flexible submersible copper cable approved

mark of 3 core 2.50 sq.mm size

191 loweing of submersible pump set complete with required 2.00 No 2323.00

no &size of casing pipe erected by means of proper

chainpulley block & pipe wrenches after checking of thread

of each pipe with coupling to take the load of pipe assembly

filled up with water with trial testing wiring G.E.B.'s test

report(A) Up to 90 meter

192 Providing and fixing to wall & celling and floor 10.0 kg 215.00 R.mt. 404.00

working pressur PVC medium grade tube to with tube

fitting and clamps including making good the wall celling

and floor(F) 50 mm diameter.

193 Providing and laying weep hole in abutment and returning 180.00 No 151.50

by using A.C. pipes of 100mm dia. including laying in

proper grade and jointing etc. complete as per detailed

specifications.

194 Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire 596.00 Pt. 449.45

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in below

type of pipe erected with 6A Modular type switch/ bell

push & accessories and earth continuity of following type,

erected on PVC/ Metallic/ Wooden box, single mounting

base frame covered with textured/metallic front plate

modules erected on/ in wall/ ceiling as per pipe erected,

with necessary Lamp holder/ ceiling rose/ H.D. Connector

as directed. with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling complete,

195 Point wiring for Modular secondary light point with 2-1.5 56.00 Pt. 151.50

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with

primary light with accessories erected on Metal/ PVC/

wooden box covered with 3 mm thick PC (Polycarbonate)/

Acrylic sheet for open/ concealed wiring with necessary

Lamp holder/ ceiling rose/ H.D. Connector as directed.

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ ceiling complete

Item Description of Item Quantity Unit Rate In Amount

196 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 239.00 Pt. 629.23

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in below type of

pipe erected with 6A Modular type switch and hum free

EME four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity

of following type erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with

textured/metallic front plate modules erected on/ in wall/

ceiling as per pipe erected. with necessary ceiling rose/

H.D. Connector as directed. with medium class Rigid PVC

pipe and accessories erected concealed in wall/ ceiling

complete, Cat-III

197 Point wiring for Individual Plug with & earthwire of 1.5 29.00 Pt. 697.91

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in below type of

pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC/ Metallic/ Wooden box covered with

appropriate front plate modules erected on/ in wall/

ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16 amp switch with 2-

2.5 sq.mm Cu. Wire from mcb db board. with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat-III

198 For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire 152.00 Pt. 473.69

from nearby switchboard/mcb db board,with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat-III

199 Point wiring for on board Looped Plug with 6A Modular 254.00 Pt. 241.39

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/ white front plate modules erected

on/ in wall/ ceiling with following type accessories, Cat-III

200 Providing following type of Modular Type Accessories 61.00 Nos. 24.24

mounted with pvc/ metallic/ Wooden box, single mounting

base frame covered with textured/ metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge Blank Plate Single , Cat-III

201 Providing following type of Modular Type Accessories 7.00 nos. 295.93

mounted with pvc/ metallic/ Wooden box, single mounting

base frame covered with textured/ metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge

6A/10A/16A/20A/25A/32A Single pole Modular MCB

Switch, Cat-III

202 Providing following type of Modular Type Accessories 7.00 nos. 190.89

mounted with pvc/ metallic/ Wooden box, single mounting

base frame covered with textured/ metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge

6/16Amp. Universal socket, Cat-III

Item Description of Item Quantity Unit Rate In Amount

203 Providing following type of Modular Type Accessories 61.00 nos. 153.52

mounted with pvc/ metallic/ Wooden box, single mounting

base frame covered with textured/ metallic front plate

modules erected with necessary connection. As desired by

Engineer In charge

Computer RJ-45 socket, Cat-III

204 Decorative call bell Ting-tong box type 250 volts complete 2.00 nos. 68.68

205 Providing & erecting Switch board for Computer or 61.00 Nos. 1081.71

electric apparatus consisting of following modular type

accessories mounted with PVC/ Metallic concealed/ open

box with single mounting base frame covered with

textured/ metallic/ white front plate, modules erected with

necessary connections as directed 1 no. 6A/ 16A universal

plug-switch combined., 3 nos. 6A Switch, 3 nos. 6A 5 pin

Plug, For Modular Type Accessories, Cat-III

206 Supplying & erecting approved make LAN cable of 945.00 Mtr. 45.45

following size in existing pipe as per direction, CAT -

207 Providing and erecting ISI mark Medium class RIGID PVC 880.00 Mtr. 32.32

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

208 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2630.00 Mtr. 78.78

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size with medium class Rigid PVC

pipe and accessories 2 wire 2.5 sq. mm

209 providing and erecting Mains with 1.1 KV grade FRLS PVC 820.00 Mtr. 248.46

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size with medium class Rigid PVC pipe and

accessories 4 wire 6 sq. mm

210 providing and erecting Mains with 1.1 KV grade FRLS PVC 45.00 Mtr. 140.39

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size with medium class Rigid PVC pipe and

accessories, 2 wire 6 sq. mm

211 Supplying and erecting Flexible PVC insulated multistrand 373.00 Mtr. 44.44

multicore 1.1 kv grade ISI marked copper wires of

following size to be erected as directed 1.50 Sq.mm 3 core

round PVC sheathed

212 Supplying and erecting Flexible PVC insulated multistrand 325.00 Mtr. 15.15

multicore 1.1 kv grade ISI marked copper wires of

following size to be erected as directed 1.00 Sq.mm twin

Item Description of Item Quantity Unit Rate In Amount

213 Providing and erecting Approved make Four pole moulded 2.00 Nos. 20946.39

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415V having normal current rating 250A.

with variable thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only, Cat III

214 Providing and erecting Approved make Four pole moulded 8.00 nos. 8055.76

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C. supply

50 c/s with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only, Cat III

215 Providing and Erecting Approved make Four pole moulded 17.00 Nos. 6173.12

case circuit breaker having breaking capacity ICU of 25 KA

at 415 V, having normal current rating up to 25 A to 100A

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s with all internal connections & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU

216 Providing and erecting Approved make Earth fault Relay 4.00 Nos. 4983.34

suitable to mount with inter connection to moulded case

circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing

125 A -200 A , CT Ratio 1/200

217 Providing and erecting Approved make Earth fault Relay 1.00 nos. 5415.62

suitable to mount with inter connection to moulded case

circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing

250 A -400 A , CT Ratio 1/400

218 Providing and erecting Approved make Earth fault Relay 3.00 Nos. 4687.41

suitable to mount with inter connection to moulded case

circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing M.S.housing

A -100 A , CT Ratio 1/100

219 Supplying and erecting triple pole & neutral 440V / 500V 1.70 Rn. Mtr. 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. Suitable for 100 Amp. Capacity

Item Description of Item Quantity Unit Rate In Amount

220 Supplying and erecting triple pole & neutral 440V / 500V 0.80 Rn. Mtr. 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. Suitable for 200 Amp. capacity

221 Supplying and erecting triple pole & neutral 440V / 500V 0.80 Rn. Mtr. 4909.61

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. Suitable for 300 Amp. capacity

222 providing and erecting Miniature circuit breaker single 288.00 Nos. 112.11

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark,

223 providing and erecting Miniature circuit breaker single 111.00 nos. 270.68

pole 0.5A to 2A system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS 8828/

224 Providing & erecting 415 V MCB Four Pole for Motor & 20.00 Nos. 668.62

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having capacity, 40 A

225 Providing & erecting 415V MCB Four Pole Switch for 28.00 Nos. 578.73

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity 6 to 32 Amp. Cat.III

226 Providing & erecting 415 V MCB three Pole for Motor & 20.00 Nos. 587.82

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity, 6 to 32 Amp. Cat-III

227 Providing & erecting 240 V MCB double pole switch for 3.00 Nos. 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity 40 Amp. Cat.III

228 Providing and erecting Sheet Steel powder coated MCB 23.00 Nos. 2339.16

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI),sheet steel double door 4 way

Item Description of Item Quantity Unit Rate In Amount

229 Providing and erecting Sheet Steel powder coated MCB 2.00 nos. 1152.41

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for single phase

incoming and horizontal single phase outgoing,sheet steel

double door (IP-43) 8 way

230 Providing and erecting Sheet Steel powder coated Vertical 5.00 nos. 5817.60

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP

TPN MCCB + RCCB as incomer and three phase outgoing as

per following . (The DBs should be used of same company

of MCB to be used),4 way outgoing

231 Approved make ELCBs/ RCCBs conforming to IS: 12640 71.00 Nos. 2235.13

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as

directed 40 A DP, Cat-III

232 Supplying & erecting earth pit of minimum bore 5.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2% Back fill Compound

:- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

Agency. For Electrical Installation up to 440V in normal

soil, Length of pipe - 1 Mtr, Back filling compound - 1 Nos

Item Description of Item Quantity Unit Rate In Amount

233 Providing & erecting weather proof, dust & vermin proof, 6.00 Sq. mtr. 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 protection & above as per

requirement made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting angles, flats

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, with suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, Bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty

end terminal connection complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory with 350 mm

234 Providing and erecting Annealed bare Copper wire 8 to 16 39.00 kg. 794.87

235 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 100.00 Mtr. 899.91

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 3 1/2 core 185 Sq. mm (

Sq. mm 1/2 core)

236 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 230.00 Mtr. 372.69

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 3 1/2 core 70 Sq. mm (

Sq. mm 1/2 core)

237 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 350.00 Mtr. 281.79

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 3 1/2 core 50 Sq. mm (

Sq.1/2 mm core)

238 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 80.00 Mtr. 217.15

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 3 1/2 core 35 Sq. mm (

Sq. mm 1/2 core)

239 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 1454.00 Mtr. 124.23

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables 4 core 6 Sq. mm

240 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 100.00 Mtr. 151.50

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 4 core 16 Sq. mm

Item Description of Item Quantity Unit Rate In Amount

241 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 20.00 Mtr. 188.87

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench/

pipe of following size of cables, 4 core 25 Sq. mm

242 Providing and, fixing heavy duty flange type brass double 15.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. 3 & 1/2 core

243 Providing and, fixing heavy duty flange type brass double 6.00 nos. 103.02

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. 3 & 1/2 core

244 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 238.36

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. 3 & 1/2 core

245 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 66.66

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. 4 core

246 Providing and, fixing heavy duty flange type brass cable 144.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. 2 to 4 core 6 Sq. mm

247 Providing and, fixing heavy duty flange type brass cable 4.00 nos. 47.47

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. 2 to 4 core 16 Sq. mm

248 Solderless crimping type Aluminium lugs conforming to IS 39.00 Nos. 15.15

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 16/25 Sq.mm.

249 Solderless crimping type Aluminium lugs conforming to IS 576.00 Nos. 6.06

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 1.5/ 2.5/4/6 Sq.mm

250 Solderless crimping type Aluminium lugs conforming to IS 50.00 nos. 20.20

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 35/50 Sq.mm.

251 Solderless crimping type Aluminium lugs conforming to IS 15.00 Nos. 25.25

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 70 Sq.mm.

Item Description of Item Quantity Unit Rate In Amount

252 Solderless crimping type Aluminium lugs conforming to IS 6.00 Nos. 80.80

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. 185 Sq.mm.

253 Supply, Installation, Testing and Commissioning of suitable 239.00 Nos. 2629.03

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos. Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as required. [Make

shall be approved by Engineer in Charge] 1200 mm Sweep

254 Supplying and erecting 19 / 20 mm. nominal bore Medium 106.65 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

255 Supplying & erecting fan hook box of 10 mm M.S. round 239.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box/ Heavy Duty PVC

box complete erected concealed in Ceiling with necessary

256 Supplying & erecting single phase approved make 22.00 Nos 2054.34

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM,

mm dia 900 RPM, Cat.II

257 Supplying and erecting approved make Octagonal pole 42.00 Nos. 6874.06

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/ 2633/ 4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer

considering site requirement 5 Mtr. Long 70 mm Top X

130 mm bottom dia, 3 mm thickness with 200mm X

200mm X 12mm base plate, 4-M16 Bolts and 600mm long J-

Bolt. Approx Pole weight 46 kg.

Item Description of Item Quantity Unit Rate In Amount

258 Supplying and erecting Street light pole bracket 15.00 Nos. 491.87

comprising main B Class GI pipe of 4.2 cm/ require outside

dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/ 80mm/

require size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length with

deg. with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with

one coat.of Red oxide/ PU base primer and two coats of

Aluminium/ PU paint. paint with following nos of arms.

Single Arm bracket 0.5 Mtr

259 Supplying and erecting Street light pole bracket 27.00 Nos. 622.16

comprising main B Class GI pipe of 4.2 cm/ require outside

dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/ 80mm/

require size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length with

deg. with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with

one coat.of Red oxide/ PU base primer and two coats of

Aluminium/ PU paint. paint with following nos of arms.

Double Arm Bracket 0.5 Mtr

260 Pipe type earthing having 150 cms. long and 2.5 cms. dia. 42.00 Nos. 368.65

galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary

SWG earth wire.

261 For using salt and charcoal / coke as required for pipe type 42.00 Nos. 171.70

262 Making trench in soft soil of suitable width of 90 cms deep 1280.00 Mtr. 46.46

for laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal

263 Providing & laying approved make Double walled 1389.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground/ road surface for enclosing cable,

264 Providing & laying approved make Double walled 195.00 Mtr. 95.95

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground/ road surface for enclosing cable,

265 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 300.00 Mtr. 343.40

cm. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

ground as per original. 300 mm dia

Item Description of Item Quantity Unit Rate In Amount

266 Supplying & erecting approved make Digital time switch 2.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

267 Supplying & erecting power contactor ,AC3 duty for time 2.00 nos. 2782.55

switch complete erected as per direction Cat III, 4 pole

268 Supplying & erecting IP 55 grade following size section 2.00 nos. 1884.66

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with

internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint. section pillar

roof should be without joint with water leakage proof &

tested as per IP 55 test & followed by IS 2147 of 1962, 60 X

30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X

5 mm thick MS angle.

269 Supplying and erecting LED street light / Flood light 69.00 Nos. 4997.48

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,

Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt. LED driver efficiency > 85 %.(fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage

capacity between the ranges shown.) Street Light (IP-65),

Surge protection- 4KV integral and ,Light must have

440VAC line supply with over-voltage protection. above

to 60 Watts, Cat-lll

270 Flood Light (IP-65), Surge protection -4KV integral and 26.00 Nos. 8453.70

,Light must have 440VAC line supply with over-voltage

protection. 150W, Cat-lll

Item Description of Item Quantity Unit Rate In Amount

271 Post Top Lantern LED fitting comprises of finish cast 4.00 Nos. 4819.72

aluminum spigot and spun aluminum canopy fixed with

opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block

IP 65, 32-40W, Cat-III

272 Supplying & erecting approved make SMC press moulded 30.00 Nos. 524.19

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. 200mm x

140mm x 125mm [deep]

273 Mains with ISI marked, 1.5KV grade electrolyte multi 46.00 Mtr. 135.34

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

required. One wire 16.00 sq. mm

274 Mains with ISI marked, 1.5KV grade electrolyte multi 15.00 mtr. 286.84

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

required. One wire 35.00 sq. mm

275 Mains with ISI marked, 1.5KV grade electrolyte multi 90.00 Mtr. 53.53

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

required. One wire 6.00 sq. mm

276 Providing and erecting Inverter based approved make split 7.00 Nos. 43105.79

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top

& Remote Control & MS Stand) with necessary core cutting.

(1)For 3 Star Rating of current year, for 1.7 to 2 ton

277 Supplying and erecting insulated pair of soft copper tubing 28.00 28.00 822.14

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

278 Supplying and erecting approved make Single phase power 7.00 nos. 3124.94

conditioners suitable for input voltage 180V / 280V, output

voltage 220V (+ / - 10%) AC 50 ‘Hz with electronic relays

& component of housed in sheet metal cabinet ‘with epoxy

powder coated, with high - low cut-off, time delay,

voltmeter, selector switch, 5/15 A universal socket with

range off, 5 KVA

Item Description of Item Quantity Unit Rate In Amount

279 Supplying and erecting approved make panel mounting 4.00 Nos. 1275.63

type Digital Voltmeter having 3 digits LED display, 0 to

750 AC Volts range erected on existing panel board with

all connection, wiring etc .with manufacturers calibration

280 Supplying and erecting approved make panel mounting 4.00 Nos. 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc. with

manufacturers calibration certificate.

281 Providing and erecting multifunctional meter suitable for 1.00 nos. 14123.84

application of Power monitoring and showing

measurement of following Voltage, Frequency, Apparent

energy, Apparent power, Active and reactive energy, Active

and reactive power, Average voltage Vavg, Peak demand

power PM, QM, SM, Demand power P, Q, S, Apparent power

S, S1, S2, S3, Unbalance current, Power factor and

displacement PF (signed, four quadrant), Calculated

neutral current, Active, reactive, apparent energy (signed,

four quadrant), Active power P, P1, P2, P3, Voltage U21,

U32, U13, V1, V2, V3, Phase currents, Average current Iag,

Peak demand currents, Reactive power Q, Q1, Q2, Q3,

Demand current I1, I2, I3, [Us] rated supply voltage

40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency

50 Hz, Type of network 3P, Display type 7 segments LED,

Display colour Red, Messages display capacity 3 fields of

characters, Display digits 12 digit(s) - 14.2 mm in height

282 Supplying and erecting approved make suitable panel 15.00 Nos. 43.43

indicator lamps of LED type lamp, lens cover, Bakelite

holder complete erected with necessary connections.

283 Supplying and erecting Ammeter / Voltmeter selector 8.00 Nos. 317.14

switch for 3 phase AC Supply 500 V on existing panel board

with necessary connections.

284 Providing & erecting L.T. Current Transformer with bar 15.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

Item Description of Item Quantity Unit Rate In Amount

285 Supplying and erecting LED indoor fittings with LEDs of 504.00 nos. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/ CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/ name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy > 85, lumens/ watt , LED driver

efficiency > 85 % (fitting required LM-79 & LM-80

Certificates), (NOTE: Below description have shown ranges

of Wattage capacity of LED fittings. The Engineer incharge

may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver,36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet, Cat-III

286 Supplying and erecting led lamps with following wattage 92.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection, Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder 8 watts, Cat-III

287 LED Lamps integral type, with PC diffuser suitable LAMP 32.00 nos. 69.69

holder, 2 to 3 watts, Cat-III

288 Providing and erecting water cooler having storage 9.00 Nos. 41342.33

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚ C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating

coil, thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel.

289 Supplying & erecting 5 stage single reverse osmosis water 9.00 Nos. 24394.53

purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of storage

tank & LPH capacity & erected as directed 50 Ltr / Hr with

150 psi 2 nos booster pump

290 Supplying & erecting recess wall mounting speaker with 16.00 Nos. 591.86

5W rated input power 3.3 K. Ohms / 3W impedance, 100 -

10000 Hz frequency response with 6 inch dia. cone type

ohms speakers duly fitted in ABS plastic cabinet of colour

match with wall or ceiling of following size. [[Approved by

Competent Authority i.e. not Below the rank of Executive

Engineer ] Square shaped 260 x 260mm size speaker

291 SITC of Power amplifier, 240W, [Approved by Competent 1.00 Nos. 19029.41

Authority i.e. not Below the rank of Executive Engineer ]

Item Description of Item Quantity Unit Rate In Amount

292 Supplying, Installing & testing approved make highly 2.00 Nos. 2740.13

sensitive microphone capable to pick up weak sound from

longer distance & wider area suitable for stage shows,

group singing with frequency response 50 - 16000 Hz.

Having sensitivity of 1.6MV / Pa & impedance, 250 ohms

(Lo -Z), Supplied with quick detachable holder & 10 mtr.

twin core cable & 3 pin XLR connector.

293 Supplying microphones stands with sturdy mechanism, 2.00 Nos. 445.41

treble free movement & positioning of microphones, free

from rust with superior quality of chrome plating with

following size. Fixed height 91 cms. & extendable up to

cms. with round base of dia. 23 cms.

294 Supplying & erecting Philips / Ahuja make four channel 15.00 Nos. 3595.60

Echo Mixer Pre-amplifier with following specification.

(i) Suitable to operate on 24OV.A.C. & 12 V D.C. Battery

(ii) B.B.D. Delay system ECHO facility on all (ii)inputs

through ECHO volume, Repeat & Delay system.

Peak LED for setting optimum distortion free input levels

Two outputs, variable for line & fixed for recording

Compatible with Audio Mixing consoles

295 SITC of 24 x 10/100/1000BASE-T ports 3.00 nos. 15399.47

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode”

management user interface, [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

296 SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP 1.00 nos. 18400.18

ports Advanced L2 switching and security features L2+

Static Routing Optional “standard mode” or “surveillance

mode” management user interface 65W PoE budget,

[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

297 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag 61.00 nos. 156.55

less, [Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

298 Supplying, installing, testing & commissioning of SOLAR 10.00 nos. 86297.43

WATER heating system as per prevailing IS code

comprising of Solar flat locket collector, stainless steel hot

water storage isolated tank with S.S. heat exchanger,

absorber made of copper sheet & copper tube of following

capacity in liter / day (LPD) with "B" size aluminium box

collector with appropriate capacity electrical backup

arrangement (Excluding inlet & outlet pipe lines), Capacity

Item Description of Item Quantity Unit Rate In Amount

299 Supply, Installation, Testing & Commissioning of following 80.00 KW 40658.56

size of Grid Tied Solar Power Plant with Solar Panels

(ALMM approved): Frame Material : Anodized Aluminum

alloy Frame With Twin Wall Profile, Front Cover : High

Transmission Low-Iron Tempered Glass (AR Coated), High

efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 &

MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules,

Thep. temp. co-efficient of the PV module shall equal or

better than -0.45%/degree C. Solar PV modules of

minimum fill factor 75% to be used. Unit Production:- 4 to

5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product

warranty and 25 year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating

Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi:

<3%, Operating Tempreture Range: -25~60°C, Anti-

islanding Protection:

Integrated, Input Reverse Polarity Protection Integrated,

Insulation Resistor Detection Integrated, Residual Current

Monitoring Unit Integrated, Output Over Current

Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: Seamless Box Pipe / 'C' Channel of

suitable size for rooftop solar installations with good

stability agaist wind & weight load., Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be

suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j

bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. and Balane of System

with necessary Swithgears (Suitabel size and protection of

ACDB & DCDB), inter connecting wiring, earthing system,

lightining arrester system, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope

(Excluding GEDA Application fees, Solar connectivity

Charges, Meter connectivity Charges, Meter testing

Grid Tied Solar Power System: 51 - 100 kW (3 - phase)

Item Description of Item Quantity Unit Rate In Amount

300 Providing & erecting Automatic solar panel cleaning 80.00 kw 3553.18

system for solar power projects which includes necessary

plumbing work (UPVC pipes and accessories) from source

of water to project site (upto 30 meters),Suitable size of

sub mercible/ open well motor, necessary wiring for motor

and sprinkler system with safety, timer circuit for

automatically on/off the sprinkler system, necessary size

oand number of nozzles/JET (minimum 1 Nozzle/Jet per

module). 51KW-100KW Cleaning System

301 Supplying & erecting resin bonded flap rock wool / glass 150.00 Mtr. 454.50

wool with conductivity valve 1.67 sq.mm per watt & to

with stand the temp. to 100 degree centigrade C thickness

50mm with G I pipe of following size dia "B" class as per

IS:1239. The plastic sheet to be used as covering of glass

wool. Al. cladding besides other materials like chicken

mesh, 26 G Al. Sheet shall be used for cladding the

insulation pipe. for 32 mm dia pipe

302 Providing, erecting, fabricating the M.S. structure as per 75.00 kg. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words)

of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

1 Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

The Contractor will have to submit the all required mix design at his own cost before execution as directed and to

be approved from the Engineer in charge.

Above all Items of "Schedule-B" with Item Description, Unit, Rate and Amount have verified by me and found

Deputy Executive Engineer Executive Engineer

District (R&B) Sub-Division District (R & B) Division

Chhotaudepur Chhotaudepur