Providing Standard Lane Marking in Main roads from Bairagipatteda Arch to MGM School, SPW Free Left to Rallapalli circle with Thermo Plastic Paint under Zone-3.

Engaging of Man Mazdoor on daily Wages including all charges etc..Complete

(BLD-CSTN 3-1- iv) - Construction of Brick Masonary in CM(1:6) prop., using second class Bricks of size 23 X 11 X 7 including cost and conveyance of all materials to site, tools and plants, scaffolding charges, all leads and lifts, curing, all labour charges, all other incidental and operational charges etc., complete for finished item of work.

(RBR-FNDN-4G-4-II-iii) Providing Plain cement concrete M15 grade nominal mix as approved by the department using 20 mm graded hard granite machine crushed metal including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge (concrete machine mixing)

(BLD-CSTN 6-3) Plastering with CM (1:5) prop., 12 mm thick, with sponge finishing including cost and conveyance of all materials to site, tools and plants, labour charges, leads, lifts, curing, scaffolding and all other incidental and operational charges etc., complete for finished item of work

Supply and application of Thermo- Plastic paint : Providing and Laying of hot applied Thermo plastic road marking compound, 2.5mm thick including reflectorising Glass beads with Refelctorising beads on Bituminous surface at 250 Gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per IRC 35 including cost of conveyance of materials, labour charges, hire charges of machinery for finished item of work. The materials should be of BERGER make (as per MORTH 803) the finishe dsurface to be level, uniform and free from steaks and holes as per specification 803 MORTH equivalant and nust comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. b) Luminance factor of the material should be in the range of 80-85% at 45 degress centigrade as per AASTHOM 249 c) Crack resistance :- The applied panel cured for 7 days under ambient condition and then should be tested as per BS 3262 Part 1, 1989 and should pass at the range of 0 Degree Centigrade to 10 Degree centigrade. d) Adhesion :- Strong. e) Softening point :- 102 Degree Centigrade f) Dried firm finish :- Smooth and Uniform g) Night vision :- High as directed by the Engineer - in - Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause confirming to IRC 35-1997 on Both Bituminus Surface & on Cement Concrete Pavement Surface Note : 1. A Sealing primer may be applied in advance on Cement Concrete Pavement to Ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on conrete surface. 2.Cost of Painter is allready included in hire charges of road marking machine (Type-XI Rate in 2025 Excluding Taxes for SH / NH Approved by R & B Department)

Supply and fixing of Molded Shanks Raised pavement markers made of polycarbonate and ABS moulded body and reflective pannels with mocro primatic lens capabul of providing total internal reflection of the light entering the lens face and shall support a load of 16000Kg tested in accordance to ASTM D4280 Type H and complying to specification of category A of MORTH Circular No RW/NH/33023/10-97 DO-III Dt.11-06-1997. The height,width and length shall not exceed 50mm,100mm and 100mm and with minimum reflective area of 13sqcm on each side and the slope to the base shall be 35+/-5 and degree.The strength of detachment of the integrated cylindrical shakes ,(of dia meter not less than 19+/-2mm and height not less than 30+/-2mm) from the body is to be a minimum value of 700Kgf.Fixing will be by drilling holes on the road for the twin shanks to go inside without nails and using epoxy resin based adhesive as per manufacturers recomondation and complete as directed by the engineer (Type-XI Rate in 2025 Excluding Taxes for SH / NH Approved by R & B Department)

Manufacture, Supply, delivery and Fixing of Cautionary Sign/Warning Sign Boards(600mm Equal triangle) By Indicating of Pedastrain Crossings / Zeebra Crossings / Spead Breaker Ahed / Footpath / School including cost of materials for manufacturing signage board, cost of painting to the board, cost of stickering bothsides of the board, Earth work excavation and laying Cement concrete for posting the Signage board and all other incidental charges etc..complete (Type-IV Rate in 2025 Excluding Taxes for MDR / ODR Approved by R & B Department)