Construction of Type-IV residence for Executive Engineer at Banjar Tehsil Banjar District Kullu HP

Amount

Cutting in earth work in all kinds soil such as pick work, jumper work and blasting work in soft and hard rock, saturated soil and its intermediate classification of soil, chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, clearance of jungle including uprooting of vegetation, grass, bushes, wood trees and scrabbling of grith up to any height and depth, removal of rubbish and unserviceable materials. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respect. with in all leads and lift of materials and as per direction of Engineer-in-charge.

Excavation in earth work all kinds of soils and disposal of all excavated earth up to any leads such as pick work, jumper work and blasting work in soft and hard rock, conglomrate rock or saturated soil and its intermediate classification of soil including chieseling/wedging out of rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift and disposal of all excavated earth up to all leads,lifts and other incidentals and as per directed by Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soil such as pick jumper work, blasting work and hard blasting work saturated soil including chiselling where blasting is not possible or any other mixed variety of soil dewatering and removal of slush and other incidentials lift upto any height stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of al surplus excavated earth with in all leads and lift and carriage of materials in all respect and as per direction of Engineer-in-charge.

Excavation in drains and channels etc. in earth work in all kinds of soil such as pick jumper work, blasting work and hard blasting work saturated soil including chiselling or any other mixed variety of soil dewatering and removal of slush and other incidentials lift upto any height stacking the excavated soil upto any lead from the edge of excavation and then retuming the stacked soil in layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of al surplus excavated earth with in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Filling in plinth with sand under floor including watering, rammimng consolidating and dressing complete including hauling/ carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing weep holes in brick masonry /stone masonary/ plain reinforced concrete abutment,wing wall,returen wall with of 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of the structure with slope of ( v):20( H) towards drawing face complete as per drawing and technical specifications clause 614,709,1204.3.7 within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(thirty into thirty into five milimetre) so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs.(four metre) and removal of the same for insitu-reinforced concrete & plain concrete work in: (a) Foundation, footings basis of columns etc. and mass concrete.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200 mm (two hundred milimetre) in thickness including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stair cases with sloping or stepped soffits excluding landing.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1 Mtr. (one metre) in depth in all heights from floor.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Edges of slabs and breaks in floors and walls: under 20 cm. (twenty centimetre) wide.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Vertical surface such as wall(any thickness) partition and the like including attached pilaster buttresses plinth and string courses and the like.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (one cement:six sand : twelve graded stone aggregate 40 mm (forty milimetre nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth:including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:5:10 (one cement: five sand : ten graded stone aggregate 40 mm (forty milimetre nominal size) and curing complete excluding cost of centring and shuttering in: retaining walls and breast wallsincluding hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded stone aggregate 40mm (forty milimetre nominal size) and curing complete including cost of form work in: Foundation and plinth including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 ( one cement: three sand: six graded crushed stone aggregate 40mm (forty millimetre) nominal size) and curing complete excluding the cost of centring and shuttering in foundation and plinths including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying M-20 grade of reinforced cement concrete with minimum cement contents of 320 Kg (three hundred twenty Kilogramme) per cubic metre mechanically mixed and vibrated with graded crushed stone aggregate of 20mm(twenty millimetre) nominal size including curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in foundations, footings, basis of columns and like mass concrete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying M-20 grade of reinforced cement concrete with minimum cement contents of 320 Kg (three hundred twenty Kilogramme) per cubic metre mechanically mixed and vibrated with graded crushed stone aggregate of 20mm(twenty millimetre) nominal size including curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying M-20 grade of reinforced cement concrete with minimum cement contents of 320 Kg (three hundred twenty Kilogramme) per cubic metre mechanically mixed and vibrated with graded crushed stone aggregate of 20mm(twenty millimetre) nominal size including curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in Columns, pillars, posts and struts up to any floor level and hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying M-20 grade of reinforced cement concrete with minimum cement contents of 320 Kg (three hundred twenty Kilogramme) per cubic metre mechanically mixed and vibrated with graded crushed stone aggregate of 20mm(twenty millimetre) nominal size including curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in Stair cases with slopped or steped (except spiral stair cases) excluding landing but including preparing to the surface and finishing of nosing in all floor levels.up to any floor level and hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying M-20 grade of reinforced cement concrete with minimum cement contents of 320 Kg (three hundred twenty Kilogramme) per cubic metre mechanically mixed and vibrated with graded crushed stone aggregate of 20mm(twenty millimetre) nominal size including curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in wall any thickness but not less than 0.10 (zero point one zero) centimetre in thickness including attached pilaster plinth and string courses from top of foundation upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 ( one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre) nominal size) to give a smooth smooth even surface including the cost of centring and shuttering but excluding cost of reinforcement and curing complete in moulding as in cornice of window sills etc. not exceeding 15 fifteen centimetre in girth including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing mild steel/Tor steel reinforcement for R.C.C. (rainforced cement concrete) work including bending, binding and placing in position complete upto floor any level : Tor Steel including cost of binding wire including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Brick work using Second Class common burnt clay building bricks in foundation and plinth laid in mud mortar including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milimetre nominal size) at plinth level in Cement Mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement Mortar 1:5 (one cement: five sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm (forty centimetre into ninteen centimetre into twenty metre) including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty milimetre) nominal size) laid with cement mortar 1:6 (one cement : six sand) including curing complete in super structure upto floor all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying precast cement concrete hollow block masonry in partition walls 10 cm (ten centimetre) with cement concrete blocks of size 40cm x10cm x20 cm (forty centimetre into ten centimetre into twenty metre) including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty milimetre) nominal size) laid with cement mortar 1:4 (one cement : four sand) including curing complete in super structure upto floor all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stone filling under floor and behind retaining walls/ breast walls including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Filling with brick aggregate in soakpit complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.Second class Deodar wood with in all leads and lifts of materials and entire satisfaction of Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws. 40 mm (forty milimetre) thick second class deodar wood with in all leads and lifts of materials and entire satisfaction of Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanised M.S. Wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for (Zero point five six milimetre) doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm (forty milimetre) thick second class deodar wood with in all leads and lifts of materials and entire satisfaction of Engineer-in-Charge.

Providing and fixing 19 mm (ninteen milimetre) thick commercial board with hard wood lipping shutters for cup boards etc. including nickle plated bright finished piano hinged etc. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 19mm (ninteen milimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 12mm (twelve milimetre) thick and 100 mm (one hundred milimetre) wide palmet with 25mm (twenty five milimetre) diameter wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three milimetre) M.S. flat 10 cm (ten centimetre) long and plugs etc. complete first class deodar wood including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. (i) 300x16mm (three hundred into sixteen milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete (i) 250x10mm (two hundred fifty into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete 150x10mm (one hundred fifty into ten milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.125 mm (one hundred twenty five milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete 100 mm (one hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S. Single acting spring hinges bright finished with necessary screws etc. complete.150mm (one hundred fifty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing oxidized M.S. hooks and eyes. 200mm (two hundred milimetre) size including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 100mm (one hundred milimetre) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 50mm (fifty milimetre) bright finished brass cup board or ward robe knob including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing 40x3 mm (forty into three milimetre) flat iron hold fast 40cm.(forty centimetre) Long including fixing to frame with 10mm (ten milimetre) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. (thirty into ten into fifteen centimetre) 1:3:6 ( one cement : three sand: six graded stone aggregate 20mm(twenty milimetre) nominal size) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing M.S.fan clamp type -1 of 16 mm (sixteen milimetre) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 10mm (ten milimetre) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred into six hundred into ten milimetre) manufactured of approved shade and colour in flooring, treads of steps and landing 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry upto all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing 10mm (ten milimetre) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred into six hundred into ten milimetre) manufactured of approved shade and colour in skirting risers of steps and dado 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and laying spartic ceremic tiles 5.5mm. (five point five milimetre) thick in flooring (300 x300mm. size)(three hundred into three hundred milimetre) treads of steps laid on a bed of 12mm (twelve milimetre). thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and laying White glazed tiles 6 mm (six milimetre) thick in skirting risers of steps and dado 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and laying granite stone in flooring 20mm (twenty milimetre) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Kota slab flooring 20mm twemty milimetre) (average) thick base of cement mortar 1:4 (one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25 mm (twenty five milimetre) thick up to all level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying 40 mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement: two sand:four graded stone. aggregate 20mm ( twenty milimetre nominal size) laid one layer finished with a floating coat of neat cement. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Cement plaster skirting 15 mm (fifteen milimetre) thick (upto 30cm height) with cement morter 1:3 (one cement: three sand) finished with a floating coat of neat cement including rounding of junction with floor including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

providing and fixing glass strips in joints of terrazzo floors (i) 40 mm (forty milimetre) wide and 6 mm (six milimetre) thick including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face 100mm (one hundred milimetre) dia PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face plain bend 100 mm (one hundred milimetre) dia PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face concrete type bend100 mm (one hundred milimetre) dia PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face shoe100 mm (one hundred milimetre) dia PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 110 mm (one hundred milimetre) dia PVC (D-Plast) clamps ISI mark of approved design with steel screws and raw plugs complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint.( i) In gratings framed guard bars,ladders ,railling,brackets andsimilar works including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing MS railing for staircase having balusrers of 19 mmx 19 mm (nineteen milimetre into nineteen milimetre) MS solid square bar with a clear height of 85 cm jointed in cement concrete steps and welded with electric/gas welding M S flat of 40mm x 6mm (forty milimetre into six milimetre) at top of vertical ballusters the ballusters welded/jointed with two number outer face M. S. flat of 40 mm x 6 m (forty milimetre into six milimetre) complete with applying priming coat of red lead paint as per specifications including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

6mm (six milimetre) Cement plaster to ceiling in Cement mortar 1:3 (one Cement: three Sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:3 (one cement:three sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:3 (one cement:three sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :-- With other than white ready mixed paint including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.Readymixed paint brushing wood primer pink. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (unconsolidated) bed dry brick/stone aggregated 40 mm (forty milimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. iincluding hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing plinth protection 50 mm (fifty milimetre) thick in cement concrete 1:3:6 (one Cement : three Sand : six Graded stone aggregated 20 mm (twenty milimetre nominal size) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimetre cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty milimetre nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) oridinary closet including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers (a) white plastic seat and cover including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PTMT Coloured/white high density polyethylene/poy propylene 10 (ten) litres capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fitting such as lead valve syphon, 15mm (fifteen milimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty milimetre) dia. C.P flush bend including cutting holes in walls and making god the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately)

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings (i) 550mmx400mm (five hundred fifty into four hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting (i) 610 x 510 mm (six hundred ten into five hundred ten milimetre) with boul depth 200 mm (two hundred milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass waste for wash basin or sink 32mm (thirty two milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 450 mm (six hundred into four hundred fifty milimetre) bevelled edge miror of superior glass mounted on 6mm (six milimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass Towell rail complete with C.P. Brass brackets fixed to wooden pluges with C.P. Brass screws (i) 600x 20 mm (six hundred into twenty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 600mm x 120 mm (six hundred into one hundred twenty milimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden pluges with C.P. Brass screws including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P Brass bib tap with Capstan head (a) 15 mm (fifteen milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P Brass pillar tap with Capstan head (a) 15 mm (fifteen milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass angle valve 15mm (fifteen milimetre) without Nuts and pipe including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass shower rose with 15mm (fifteen milimetre) or 20mm (twenty milimetre) inlet, 100mm (one hundred milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing P.V.C connection with brass unions 15mm (fifteen milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing brass full way valve with wheel 15mm (fifteen milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing brass full way valve with wheel 20mm (twenty milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm (seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three milimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete 110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three milimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete 75 mm (seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete 75 mm (seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm (seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC Cowl 110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC Cowl 75 mm(seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete110 mm (one hundred ten milimetre) nominal size diametre including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete 75 mm (seventy five milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110mm x 75mm(one hundred milimetre intoseventy five milimetre, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level :- 1000 litres (one thousand litres) net capacity tank with in all leads and lifts of materials and entire satisfaction of Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:-15mm (fifteen milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:-20mm (twenty milimetre) nominal bore including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing manhole with RCC top slab in 1:2:4 mixure (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre nominal size) foundation concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate 40mm (forty milimetre nominal size) inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred milimetre) and 500mm (five hundred milimetre) deep including C.I. Cover with frame (light duty single seat pattern I) 455x600mm (four hundred fifty five into six hundred milimetre) internal diametre total weight of cover and frame cover and frame to be less than 38 kg (weight of cover 23kg on and weight of frame 15 kg.) With 300mm (three hundred milimetre) thick walls of squared rubbled masonary coursed with hard stone appoved quantity in Cement mortar 1:3 (one cement : three sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

PRAKASH CHAND