Providing and Fixing Polycarbonate sheet in backside of D3 Mess at South Campus of IIT Mandi.

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead and lift as per direction of Engineer - in - charge. a) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : a) 125x90x4.00 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) : a) 125 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing pre-coated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/self-tapping screws complete : a) Flashings/ Aprons.( Upto 600 mm) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. a) Old work (one or more coats) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Design, Supply, Fabrication and Installation of Multiwall Polycarbonate Sheet 3mm thick of any colour, UV stabilised and sheet should be properly jointed with M.S frame in desired shape and Size, including fixing with all necessary fasteners, hooks, bolts, nuts, sealants and aluminium strips of required size as per approved specifications. The work includes preparation of shop drawings as per manufacturer's specifications and approved architectural drawings complete etc. which shall be approved by Engineer-in-charge. (M.S frame work shall be paid separately) as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

Providing and fixing M.S wire of required width in mesh size 25x25mm made of M.S. wire of dia 3mm including necessary welded or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of M.S. wire of dia 3.0 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material within all lead and lift.

BHANU PRATAP SHARMA (BID ID -3170395)

M/S Reetika Associates & Construction (BID ID -3166600)