Repairs or Renovation of visitors Toilet at the entrance of H and T bldg. inside factory area at OFMK.

Amount

EXCAVATION : Excavation over areas in hard/dense soil not exceeding 1.5 m depth and getting out, spreading/levelled, complete all as specified and directed.

SITE CLEARANCE : Site clearance in soft/loose soil complete all as specified and directed.

HARDCORE : Hardcore with broken stone/ boulders of gauge not exc. 63mm, deposited, spread, levelled in layers not exc. 15 cm thick and watered and rammed to a true surface, complete all as specified and directed.

Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed

PCC FLOORING : PCC 1:4:8 in floors/ paving of type D-2, 1:4:8 with 40mm graded aggregate, 100 mm thick . Concreting should be done in panels as directed. Complete all as specified and directed.

PCC FLOORING : PCC 1:2:4 in floors/ paving of type B-1, 1:2:4 with 20mm graded aggregate, 100 mm thick . Concreting should be done in panels as directed. Complete all as specified and directed.

RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed.

REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .

FORMWORK : Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6

FLOOR TILES : Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make: Johnson/ Kajaria/ Somany/ RAK

WALL TILES : Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

FLOOR TRAP : PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement

WATERPROOFING : Supply only of liquid waterproofing compound. Make: Dr. Fixit, BASF, SIKA

PVC DOOR : Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site

DOOR FRAME : Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification

UPVC VENTILATOR : Supply and fixing factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension

PVC PARTITION : 40mm thick Solid PVC Sandwich Panel with lmm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing

PVC TANK : Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 ltrs. capacity hoisted and fixed in position all as specified Make: Sintex/ Prayag/ Watertec

False Ceiling : S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material 8 mm thk. reinforced with cellulose fibre for fixing in 600 mm x 600mm grid Make: Gyproc/ Lagyp

Snap Grid : S&F Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling all as specified

EWC : EWC floor standing with S trap and soft closing seat cover Make: Jaquar(Continental)/ Parryware(Prime)/ Cera(Clair)

URINAL : Sensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair)

WASH BASIN : Under counter Wash basin of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make: Jaquar(Continental)/ Cera(Clair)/ Parryware(Prime)

PILLAR COCK : Pillar cock with auto closing system of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain)

CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware (Prime)/ Cera(Fountain)

2 WAY ANGLE COCK : CP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo)

EWC JET FAUCET : EWC jet faucet of make: Jaquar(Solo)/ Parryware (Uno)/ Cera(Fountain)

BIB COCK : CP Bib cock of make: Jaquar(Solo)/ Parrywaare(Uno)/ Cera(Fountain)

MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold

SOAP DISH : SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain)

CONCEALED STOP COCK : CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain)

GI PIPE : GI pipe of dia 15mm medium grade with all fittings Make: Tata/ Apollo/ Jindal

GI PIPE : GI pipe of dia 25mm medium grade with all fittings Make: Tata/ Apollo/ Jindal

BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

FLOAT VALVES : 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms

SWR PIPES : PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors Make: Sudhakar/ Prayag/ Watertec

SWR PIPES : PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors Make: Sudhakar/ Prayag/ Watertec

WEATHERPROOF PAINT : Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Make: Asian Paints Apex/ Berger Weathershield/ Nerolac Excel.

GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

BRICKWORK: Brick work with sub class ‘B’ bricks straight or curved in plan with 1:4 cement mortar. Complete all as specified and directed.

PLASTERING : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed.

Point wiring: Supply and fixing /Drawing of cables in PVC conduit of 1"or 3/4" Dia ,one Light point or one fan point controlled by one switch with cables 1.5 sq.mm size of FR PVC copper conductor, Each point should have seperate phase,neutral and earth wire. Make: Finolex/ Havells/ polycab/ L&T in PVC conduit, includes all accessories like bends, tees,screws,clips , plugs,clamps,junction boxes ,cutting holes in or through walls,fixing of boards and grouted into the wall,earth wire etc and testing as specified. Wiring on metal trusses to be done with proper metal clamps(cable ties should not be used). All connections to be given by copper Pin/eye type lugs including for earth connections.Complete all as specified and directed.

Point wiring: Supply and fixing /Drawing of cables in PVC conduit of 1"or 3/4 " Dia , for fixing one 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC.Each point should have seperate phase,neutral and earth wire. Make:Finolex/Havells/Polycab/L&T ,including all accessories. Complete all as specified and directed.

Ceiling Rose: Supply and fixing of ceiling rose, PVC/Polycorbonate, 3 terminal Make: Legrand/Schneider/Havells of ISI quality. Complete all as specified and directed.

6A Switch Modular, 1 way: Supply and Fixing of modular switch 1 way, 6 amps, 1 module, Make: Legrand/Schneider/Havells of ISI quality. Complete all as specified and directed.

6A Socket Modular: Supply and Fixing of modular socket outlet 6 amps ,2/3 pin combined, 2 module. Make: Legrand/Schneider/Havells of ISI quality. Complete all as specified and directed.

Covering Plates with frame: Supply and Fixing of modular white colour covering plates with frame of 6 module. Make: Legrand/Schneider/Havells. Complete all as specified and directed.

Metal Flush Box: Supply and Fixing of modular metal flush box, 6 module for mounting switches and sockets. cable terminations to be done neatly with lugs, grouted into the wall. Make: Legrand/Schneider/ Havells. Complete all as specified and directed.

Supply and Fixing of GI pipe 32 mm dia medium grade, on side walls of building suitable for fixing street light fitting including bending the pipe to the required shape, with required welding, Painting the flat iron with primer and finish paint. complete all as specified and directed.

MCB :Supply and fixing of MCB, 240 V, single pole 5 to 40 Amp Make legrand/Schneider/Indoasian/Havells of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

Submain wiring: Fixing only of wiring for sub main wiring along with earth wire with following sizes of FR PVC insulated copper conductor single core cable 4x25 Sq.mm + 2x16.0 sq.mm earth wire in wiring. All necessary items like clamps, screws,clips etc for fixing to be arranged by contractor. (Cable will be supplied by OFMK). Complete all as specified and directed.

Cutting Chases: Cutting chases on brick walls for MCB DBS, wiring and MS boxes for mounting switches, MCBs exceeding 20 cm girth, pinning in, making good to facings where required and pointing in cement mortor 1:3 to ends or edges etc. Complete all as specified and directed.

Cutting Chases: Cutting chases on brick wall for concealed conduit wiring,pinning in, makin good to facings where required and pointing in cement mortor 1:3 to ends or edges etc. cutting not exc 10 cm girth. Complete all as specified and directed.

Exhaust Fan: Supply and Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding of sweep 250mm. Make: Havells/Crompton/Bajaj/Usha. Complete all as specified and directed.

LED DOWN LIGHT : Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser down light 3 in 1 cool day light/warm light soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

MCB D.B :Supply and fixing of Sheet Metal enclousers for MCB D.B of double door of TPN, 6 way, 415 V, phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider/ Indoasian/ Havells complete all as specified by EIC.

LED Street Light : Supply & Fixing LED street Light 30-35 wat, 230 V, 50Hz, 1phase , Aluminium diecast Make: CG/Syska/ Halonix/ Philips/ Orient/Surya/wipro.

Street light fitting angular bracket pipe: : Street light fitting fixing pipe complete with 1.5 m long G.I. pipe 40 mm dia for security light complete all as specified by the EIC.

P LAVAKUSHA REDDY CONTRACTORS

SANTOSH ENGINEERING WORKS