Pinting and Renovation wrks to SAC Barrage

Cleraring thick jungle growth in existing parks (less than 50 percent open space) including bushes upto 30 cm/parthenium and ohte rweeds including burning or disposing off the same as directed etc.,complete as directed by the Engineer-in-charge.

White wash two cots with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials,labour charges and incidental such as scaffolding ,lifts charges etc.,complete for finished item of work, but excluding conveyance charges of materials for finished item of work.(For exterier of walls at ground floor)As directed by the Engineer-in-Charge.

White wash two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials,labour charges and incidental such as scaffolding ,lifts charges etc.,complete for finished item of work, but excluding conveyance charges of materials for finished item of work.(for interier and exterier of walls at 1st floor)As directed by the Engineer-in-Charge.

Providing 12 mm thick plastering in cement mortar 1:3 proportion by volume including costof all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing,complete with initial lead upto 50 m and all lifts. curing etc.,As directed by the Engineer-in-Charge.

Scarifying the existing bituminous road surface upto a depth of 50 mm by Mechnical means including all labour charges etc.,complete as directed by the engineer in charge.

Providing,Laying, spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadam specification including cost of al lmaterials and excluding Seigniorage charges and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., and as directed by the Engineer-in-Charge.

Providing and laying of 50 mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an average out put of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading-II as per table 500-7of MoRT&H specification 504 (5th Revision) premixed with bituminous binder of 60/70 grade @ 3.4% by weight of total mixture, trasported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge.

Providing and applying tack coat with Bitumen VG-10 (Bulk) using pressure distributor at the rate of 0.20 Kgs per Sqm on the prepared bituminous surface cleaned with mechanical broom for finished item of work as per MoRT&H specification 503 (5th Revision) and as directed by the Engineer-in-Charge.

Providing and laying Bituminous Concrete with 100 - 120 TPH batch type hot mix plant producing an average output of 75 tones per hour using hard blasted granite crushed aggregates of Grading – II as per Table 500-17 of specification 507 of MoRT&H (5th revision), premixed with Bituminous binder of VG 30 Grade @ 5.4 % of mix and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade, level and alignment, rolling with smooth wheeled rollers to achieve the desired compaction as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer-in-Charge.

Excavation for Structures- Mechanical Means(Data adopted from MORTH)Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material Depth upto 3 m.As directed by the Engineer-in-Charge.

Supply and fixing fo Hot dipped Galvanised chain link mesh 8 Guage (4.0mm) as perIS.2721-1979,4''x 4''(102MMX 102MM),includingcost and conveyance of link mesh,all leads and lift,all other general and incidental charges etc., complete for the finished item of workas directed by the Engineer-in-charge

Supply and fixing 100mm dia G.I pipes ''B'' class for verticalposts on platformincluding cost and coveyance for link mesh,all leads and lifts all other general andlift,all other general and incidental charges etc., complete for the finished item of workas directed by the Engineer-in-charge.

Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than15 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.As directed by the Engineer-in-Charge.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres,As directed by the Engineer-in-Charge.

Dismantling of existing Brick and Tile works structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres,As directed by the Engineer-in-Charge.

Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade,As directed by the Engineer-in-Charge.

Providing and applying two coats of ready mix paint of approved brand on wood surface after thorough cleaning of surface to give an even shade,As directed by the Engineer-in-Charge.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface,Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.As directed by the Engineer-in-Charge.

Street Lighting ,Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with sodium vapour lamp and fixed firmly in concrete foundation.As directed by the Engineer-in-Charge.

Lighting on Bridges Providing and fixing lighting on bridges, mounted on steel hollow circular poles of standard specifications, 5 m high fixed on parapets with cement concrete, 20 m apart and fitted with sodium vapour lamp,As directed by the Engineer-in-Charge.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.As directed by the Engineer-in-Charge.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications,As directed by the Engineer-in-Charge.

Repair of RCC RailingCarrying out repair of RCC M30 railing to bring it to the original shape.As directed by the Engineer-in-Charge.

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work ,As directed by the Engineer-in-Charge.

Supply and fixing of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8- 10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs,As directed by the Engineer-in-Charge.

Supply and fixing Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 12.5 mm thick as per IS 2095 1992,As directed by the Engineer-in-Charge.

Providing and fixing factory-made PVC any colour sliding glazed window up to 1.50 m in height imensioncomprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy ,As directed by the Engineer-in-Charge.

Fabrication, Supply and fixing iron Grills with 12 mm X 12 mm thick steel rods for protecting existing office buildings,like sectin offices and sub-division offices etc.,including cost and conveyance of iron to site of work, fabrication charges for fixing the same in postion,all leads and lifts, all other general and incidental charges etc., complete for the finished item of work and as dircted by the Engineer-in-charge.

Flooring with Chequrred terrazoTiles of 22mm thick (Medium shade),1st.quality as approved by the Engineer - in - charge set over a base coat of CM (1:6), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water,tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work. for Bathing ghat steps.As directed by the Engineer-in-Charge.

Roofing with plain or Corrugated Glavanized iron sheets as per IS 277 (0.1mm to 0.8 mm thickness)with bitumen and G.I limpet washers filled with white laed and including cost and conveyance of iron to site of work, fabrication charges for fixing the same in postion,all leads and lifts, all other general and incidental charges etc., complete for the finished item of work and as dircted by the Engineer-in-charge.

Supply and fixing of Nano ceramic roofing tiles 6mm thick along with appolo Brand GP Pipes including all Trasportation for all material and including primer painting for all frame work with redaxoid for office buldings at dowlaiswaram,As directed by the Engineer-in-Charge.