RENEWAL OF FURNITURE AGAISNT SURVEYED OFF AT BRD AF STN CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Chair Verandah As per FD-359

Chair dining As per FD-279. Overall size shall be 400x430x890 mm. All wood shall be of first class hard wood Teak. Canning shall be done without any joint in the cane. The cane shall be 2mm wide 0.4mm thick half round gola type of Shah/Premier brand woven in Godrej pattern. the cane shall not weigh less than 6 gms per ten running meter. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. hard rubber shoes shall be provided to the botoom of legs. Rest all as per drarwing.

Table Conference- The table shall be U shape with one end covered and the other end open for 12 person. Overall Dimensions shall be 2125x1800x760mm. The table shall be made of 18 mm thick commercial plywood with 1.5 mm thick laminated sheet fixed on all exposed surfaces as approved by GE. 4mm thick Teak wood edging shall be provided on all exposed edges of the plywood. The laminated sheet over the top will be fixed such as to cover the alround edging. The internal frame of the table shall be made of 32mm MS Square Tube of wall thick ness 1.6mm as directed by the Engineer-in-charge. Slanted Foot rest all along the length of the table shall be provided as directed by Engineer-in-charge. Holes for Projector/mic cables as required and specified shall be provided. Hard PVC shoes shall be proveide at the bottom of steel legs.

Table Center FD-274 - Overall size shall be 900 x 450x400 mm. All wood shall be of first class hard wood Teak. 18mm thick plywood commercial with 1.5mm thick plastic laminated sheet as approved by GE shall be provided as top of table. 4mm thick Teak Wood edging shall be provided all around the top. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. Rest all as per drawing.

Sofa Set Three Seater long piece. As per FD-281 - The sofa set shall be made of first class hard wood Teak. 100 mm thick cushion of foam density 32 covered with best quality tapestry cloth as approved by GE shall be used for seat and back as shown in the drawing. The foam shall be of Make: KurlOn/Sleepwell. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. rest all as per drawing.

Sofa Set five seater As per FD-281 - All as per the drawing and as specified by Engineer-in-charge. 100 mm thick cushion of foam density 32 covered with best quality tapestry cloth as approved by GE shall be used for seat and back as shown in the drawing. The foam shall be of Make: KurlOn/Sleepwell. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. rest all as per drawing.

Table 900X600X760 mm w/o drawer FD- 284 - The overall size shall be 900x600x760mm high. All wood shall be of first class hard wood Teak. 18mm thick plywood commercial with 1.5mm thick plastic laminated sheet as approved by GE shall be provided as top of table. 4mm thick Teak Wood edging shall be provided all around the top. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. Rest all as per drawing. Rset all as per drawing.

Chair Computer as per drg No. FD/E6/MAP/01 - All as per drawing and Trade pattern as approved by GE.

Table Peg FD-277 - All as shown on drawing. Overall size shall be 450x300x380mm.Two numbers top rails of section 20mmx40mm of teak wood shall be provided connecting the legs. Irrespective of what is shown on drawing the legs shall be joined with top rails of section 20mmx40mm in section on shorter side of the top. the wood shall be first class hard wood teak. The top shall be made of 18mm thick commercial plywoo with plastic laminated sheet of shade as approved by GE. 4mm teak wood edging shall be provided alround the top. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finiish as directed by Engineer-in-charge. rest all as per drawing.

Table dinning for 6 per FD-273 - all as shown on drawing. All wood shall be of first class hard wood Teak. 18mm thick plywood commercial with 1.5mm thick plastic laminated sheet as approved by GE shall be provided as top of table. Plastic laminated sheet shall be extended over the teak wood edging as shown on drawing. 4mm thick Teak Wood edging shall be provided all around the top. All wood surfaces exposed to view when placed in position shall be French polished with high gloss lacquer finiish as directed by Engineer-in-charge. Rest all as per drawing. Rset all as per drawing.

Table Office clerck steel as per FD-1004 - All as shown on drawing. Four legs of mild steel tube of 1.6mm wall thickness shall be provided. The top of legs shall be joined together with 25mm square mild steel tube of 1.6mm wall thickness in long and short sides. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surfaces. Rest all as per drawing.

Almirah Large Steel FD- 1031 - Overall size shall be 920x485x1985mm. Mild steel sheet of 1mm thickness shall be used to make the almirah. All joints, welding shall be done in accordance with the standard workmanship. All steel surfaces internally and externally including bottom shall be coated with two coatd of enamel paint of approved shade over a coat of rpimer with spray machine upto the satisfaction of Engineer-in-charge. Good quality Lock and handle of make as approved by GE shall be fixed. The overall weight of each ready article should not be less than 79 Kgs. Rest all as epr drawing.

M/s AVINASH CHANDER GUPTA

M/s Rajesh Kumar Jain