Pattanchery Gp 2021-22 -Attanchery PAP centre to Paramada road retarring in ward 03 proj no 171

Amount

RETARRING

od1380856/2021_2022 : Filling up pot holes (cut and formed to regular shapes and all loose and defective<br>materials removed) after supplying a prime coat of hot bitumen using 36mm broken stone and compacting<br>with power roller to get a compact surface

75.5.2.2pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.9.3.pb.pa : Plastic roads- Packed Bitumen Rate <br> 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder -<br> Bitumen S-65 - Packed Bitumen and Shredded Plastic<br> <br> Providing, laying and rolling of opengraded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, using HM Plant attached with open pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, then transferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2 mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hot bitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rolling with a. three wheel 80-100 kN static roller capacity, finished to required level and grades to be- followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 <br> Case - I By Manual Means <br> <br> (II) Bitumen (S-65),including supplying and stacking of materials.

75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65),including supplying and stacking of materials.

NAME BOARD

od1380867/2021_2022 : Supplying &amp; providing readymade GI nameboard with all conveyance ,labour &amp; hirecharges etc complete using GI hollow tube of size 80 x 40x1.4 mm post,40 x20x1.4 mm outerframe ,0.6mm thick iron sheet of size 90 x 60 cmwith two coat of enamel painting over a coat of primer ,lettering with suitable colour &amp; size,fixing the post in ground with CC 1:2: 4 etc complete

MOHANAN.T.A

Bidder Name

MOHANAN.T.A

AKSHAI.V