REPAIR/MAINT TO COVERED DRAINS,CLEANING AND REPAIRS TO SEWAGE LINE AND MANHOLES,SEPTIC TANKS AND REPAIRS TO DRAIN, BARBED WIRE FENCING AND COMPOUND WALL AT L,M AREA ,REPAIR TO AREA FENCING, DRAIN,CLEANING AND REPAIR TO SEWAGE LINE SEPTIC TANK ETC AT

Amount

Opening/Lifting of man hole cover and taking out waste soil,sludge, other sediments, solid waste, and liquid waste from manhole, septing tank in any condition by pumping or any other mechanical means and refix the man hole cover on completion of work, complete all as specified and as directed by Engineer In Charge. Note:- (a) The night soil, other sediments, solid waste, and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and NB(K) Premises on closed containers/conveyance and disposed off out of defence land (b) Disposal of the same shall be the responsibility of the contractor with out any extra expenditure to government. Disposal of waste shall be made in accordance with the regulations of authorities concerned. (c) The unit rate quoted shall be deemed to be inclusive of cleaning the neared MH & sewage line from that MH to septic tank.

M&L pumping out sludge water from manhole for cleaning blocked sewage line mouth, depth of manhole exe 1.5m complete all as specified and as directed by Engr-in-Chrge.

Cleaning by roding /bamboo split and taking out waste soil, sludge and other foreign materials from sewage line/effluent drains below/above GL of any dia removed with sealed container complete all as directed by Engr-in-Charge.

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in single storied/ground floor of multistoried bldgs complete all as specified and as directed by Engr-in-Chrge.

Cleaning of covered drain not exc 60 cm wide and removal of silt to a distance exc 100 mtr and not exc 150 mtr away from starting point and disposed off including removing the cover and re fixing the same position, complete all as specified and as directed by Engr-in-Chrge.

Cleaning of CI rain pipe/soil waste pipe of any dia by rodding or with bamboo split including taking down inspection eye door cover and refixing inspection eye cover in existing position etc complete all as specified and as directed by Engr-in-Chrge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap including provision of seat and cover for pedestel pan,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float , handle and brackets,flushing pipe of steel tube or polyethylene including jointing to socket of flushing rim(with and including India rubber cone joint,if flushing rim connection is nozzle pattern) and connecting pipe to union of flushing cistern, in let and overflow pipes connecting flushing cistern including taking down old SWR pipe as required, complete all as specified and as directed by Engineer in Charge.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests squatt pattern pan with 'P' or 'S' trap; including provision of lime concrete bedding , provision of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float , handle and brackets,flushing pipe of steel tube or polyethylene including jointing to socket of flushing rim(with and including India rubber cone joint,if flushing rim connection is nozzle pattern) and connecting pipe to union of flushing cistern, in let and overflow pipes connecting flushing cistern including taking down old SWR pipe as required, complete all as specified and as directed by Engineer in Charge.

S&F in repairs PVC bathroom cabinet(white) of size 420x300x100 mm(approx) with one single shutter and built in mirror in front of shutter complete all as specified and as directed by Engineer -in- Charge.

S&F in repair fancy type 15mm pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed by Engr-in-Chrge.

S&F in repairs, 15 mm bore bib tap cast copper alloy, fancy type chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and as directed by Engr-in-Chrge.

S&F in repairs, seat cover for EWC with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-Chrge.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil, complete all as specified and as directed by Engr-in-Chrge.

M&L for 150mm internal dia salt glazed stoneware drain pipes grade 'A' laid in trenches and jointed as specified (confirming to IS 651 (1980), complete all as specified and as directed by Engr-in-Chrge.

M&L for cement concrete bed to drain pipes150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed by Engr-in-Chrge.

M&L for 600 mm dia reinforced concrete pipes class NP2 laid and jointed complete with collars all as specified and as directed by Engr-in-Chrge.

M&L for 300 mm dia reinforced concrete pipes class NP2 laid and jointed complete with collars all as specified and as directed by Engr-in-Chrge.

M&L for Concrete bed to drain pipes for 600 mm bore pipe including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed by Engr-in-Chrge.

M&L for Concrete bed to drain pipes for 300 mm bore pipe including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed by Engr-in-Chrge.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed by Engr-in-Chrge

Removing excavated material n. exc. 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engr-in-Chrge.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.

M & L for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in cover slab for manholes, chullah hoods,chajjas,water troughs,shelves etc. and similar articles with plain face set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Chrge. Note : ( Reinforcement shall be measured and paid seperately )

M&L for 100 mm thick plain cement concrete in 1:2:4 type B2 using 40 mm graded stone aggregate as in pavement and flooring etc and surface finished even and smooth with out using extra cement including necessary form work, complete all as specified and as directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and as directed by the Engineer In Charge

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Chrge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Chrge.

Demolition of brickwork or stone/ boulder masonry, pre-cast concrete block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, etc all as specified and as directed by the Engineer-in-Charge.

M & L brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

All as per item No 30 above but except bricks

Taking down cement plaster on brick /concrete wall or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface of wall finished even and smooth without using extra cement ,complete all as specified and as directed by Engineer- In- Charge.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of apoxy anticorrossive paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type including mild steel deformed bars in any size complete all as specified and as directed by Engr-in-Chrge.

Supply and fix MS galvanised chain link fencing of grid size 50x50x3.10 mm dia wire ( Weight not less than 3.25 Kg/sqm) including supply and binding with GI binding wire of gauge not less than 18, complete all as specified and as directed by Engineer In Charge

M&L for 10 mm dia round mild steel bars for binding concertina coil/chain link fencing and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip[ quality conforming to gde I IS 432(pt I ) complete all as specified and as directed by Engineer-in-Charge

S&F in repairs, vitreous china wash basin, 550x 400mm size, white flat back including 32mm chromium plated waste coupling and MS brackets etc. complete all as specified and as directed by Engr-in-Chrge.

S&F in repairs, PVC flushing cistern symphonic action type, 10 liters capacity, low level, white with inlet ball valve, float and handle including PVC flush pipe and fixing to WC complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs, 100 mm outlet dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) (20mm grade stone aggregate) complete all as specified and as directed by Engr-in-Charge.

S&F in repairs concertina coil of 610 mm diameter made out of 2.6mm dia spring steel wire 230gm/m2 (Min) dipped with corosion prevantive fluid (rusilo 901) including white colour each coil having a minimum 50 turns (circles) and an average weight of not less than 8.57 Kg including handle and spike at both end of coil erected in position on top of mild steel angle by fixing with GI clip for securing including necessory welding to the MS Section and as per manufactures instruction complete all as specified and as directed by Engr-in-Charge.

M&L rendering 15 mm thick in cement mortar 1:4 on concrete / brick with using water proofing compound as per manufacturers instructions(WPC shall be measured and paid seperately)finishing plastered surfaces even and smooth, without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L rendering 10 mm thick in cement mortar 1:3 on ceiling surface , finishing plastered surfaces even and smooth, without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound, conforming to IS and as approved, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastred surface/ un treated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer- In - Charge

M&L for preparation of new plastred surface of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer- In - Charge

M&L for preparation of old decorated surface of walls by washing,rubbing down and stoping of cement base surface and applying one coat of cement base paint complete all as specified and as directed by Engineer- In - Charge

M&L for preparation of old painted steel and iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel and iron surface of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of ceiling including cornices (Plastered or unplastered) and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of colour wash complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of distemper oil-emulsion, at any height of bldgs/hangars complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surface of wood or wooden based surface of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of wall applying one coat of weather proof (anti fungal) paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of wall applying one coat of Apex Ultima protek (top coat) paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted plastered surface of any description over 10 cm width or grith and applying one coat of plastic emulsion paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surface of MP tiles including cornices in roof ,chequered tile flooring and applying one coat of weather proof (anti fungal) paint complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests squatt pattern pan with 'P' or 'S' trap; including provision of lime concrete bedding (excluding flushing cistern and flush pipe including taking down old SWR pipe as required, complete all as specified and as directed by Engineer in Charge.

Taking downeaves gutters and rain water pipes (any size or pattern),including all fittings,heads,shoes,bends,swan-necks etc,including cleaning for refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by Engineer in Charge

S&F 110 mm dia of PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls (Jointing shall be done with solvent cement) complete all as specified and as directed by Engineer In Charge.

S&F 110 mm dia of PVC (SWR) bends complete all as specified and as directed by Engineer In Charge.

S&F 110 mm dia of PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed by Engineer In Charge.

Material and labour for pre-cast cement concrete block masonry with solid blocks of PCC 1:2:4 type B1 (using 20 mm graded aggregate) exceeding 10 cm width and setting in cement mortar 1:4 , complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 67 above but except bricks, complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface of wall finished even and smooth without using extra cement , complete all as specified and as directed by Engineer- In- Charge.

Dismantling wrought iron or mild steel work or cast iron work including C I pipes,bends etc of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC waste pipe 32mm bore 80 mm long complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level complete all as specified and as directed by Engineer-in-Charge.

M&L for 40 mm thick plain cement concrete in 1:2:4 type B2 using 12.50 mm graded stone aggregate as in pavement and flooring etc and surface finished even and smooth with out using extra cement including necessary form work, complete all as specified and as directed by Engineer-in-Charge

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforcement cement concrete in ground floors and pavings n. exceeding 15 cm thickness (below or above ground level) and as directed by Engineer-in-Charge..

M&L for Mild steel TMT bars 5 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clip all as specified and as directed by the Engineer In Charge

M & L for providing pre -cast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces including necessary form work complete all as specified and as directed by Engineer in- charge .

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed by Engr-in-Chrge.

Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and as directed by Engr-in-Chrge.

M& L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with Creosote complete all as specified and as directed by Engr-in-Chrge.

S& F second class hard wood clean swan battens for tiles fixed at 30 cm centre to centre, Sectional area exc 5 sqcm and nexc 15 sqcm complete all as specified and as directed by Engr-in-Chrge.

All as per item No 81 above but fixing only battens (battens shall be used obtained from dismantlings) complete all as specified and as directed by Engr-in-Chrge.

M& L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed by Engr-in-Chrge.

All as per item No 83 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and as directed by Engr-in-Chrge.

M& L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed by Engr-in-Chrge.

All as per item No 85 above but except tiles( tiles obtained from dismantlings shall be used) complete all as specified and as directed by Engr-in-Chrge.

Oriental Constructions