Loading…
Loading…
Tender Value
₹4.2 L
EMD Value
₹10,592
Closing Date
30 Jun 2026, 3:00 pm3d left
Similar tender results from the same govt authority in the past 3 years.
Assistant Executive Engineer
Assistant Executive Engineer O/o PWD Buildings Sub Division Wadakkanchery
Civil works
2026_PWD_857454_1
PWD/BLDG/3081/2026-2027
Open Tender
Civil Works - Buildings
180 days
Blind School-HM Quarters
Please refer Tender documents.
9 documents required · 9 mandatory
₹935
Yes
₹10,592
Yes
24 Jun 2026
24 Jun 2026
2 Jul 2026
24 Jun 2026
30 Jun 2026
24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Maintenance works 2024-25 Repairs to blind school | ||||||
| 1.001 | 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 0.6 | sqm | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD296525/2025-2026:Providing and fixing 15cm wide, 45 cm overall perimeter UPVC gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. | - | metre | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | - | metre | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend | - | no | - | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | - | sqm | - | - | BI01010001010000000000000515BI0100001122 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
PreliminaryAgmt.pdf
Tender Documents • 0.25 MB
Formoftender.pdf
Tender Documents • 0.01 MB
SBD.pdf
Tender Documents • 1.63 MB
Affidavit.pdf
Tender Documents • 0.01 MB
BOQ_1449443.xls
BOQ • 0.30 MB
Requisitionforepayment.pdf
Tender Documents • 0.07 MB
IntegrityPact.pdf
Tender Documents • 0.01 MB
Download all tender documents and submit your bid