Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.9 LAccepted-AOC | ₹54.9 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical TECHNICALLY NOT QUALIFIED |
| 3 | Rejected-Technical | - | - | Rejected-Technical TECHNICALLY NOT QUALIFIED |
| Sl No | Description | Qty | Unit | TAURUS CONVEYOR COMPANY L1 |
|---|---|---|---|---|
| 1.00 | Dismantling the Existing Maize elevator and stacking the scrap material as directed by the engineer in charge, Dismantling & Relocating the Existing chain conveyor | 1 | Lot | 2,00,000 ₹2,10,000 Lowest |
| 2.00 | Supply and installation of Galvanized Silo Maize Unloading Bucket Elevator – 10” (for handling Maize, Oil Cakes & bran of particle Size 1 to 10mm). The elevator system consists of MS elevator-seamless, Bucket fixing bolts With rubber Belts and all trough sheets will be of Galvanized Iron With adequate thickness. Drive is 7.5 HP Geared Motor of SEW Make | 1 | Lot | 23,00,000 ₹24,15,000 Lowest |
| 3.00 | Supply and Installation of Redler Conveyor With Drive at the outlet of the Maize Elevator. The entire Conveyor Will be Galvanized Except for the chain & will independently feed one of the silo. Drive is shaft mounted unit of SEW of 3 HP | 1 | Lot | 9,00,000 ₹9,45,000 Lowest |
| 4.00 | SS Gravity Pipe 3mm thick, 250 mm dia with required no. of end flange for fixing on elevator outlet / flap approx., 6m (3m each) | 1 | Lot | 50,000 ₹52,500 Lowest |
| 5.00 | Supply of SS Pneumatic type two way flap suitable for fixing on 250 mm pipe along with connecting chute with inspection door with proper locking arrangement on both side, 3mm SS Fabricated body, Rod EN8 | 1 | Lot | 60,000 ₹63,000 Lowest |
| 6.00 | Supply of ½” GI Pipe for air distribution to Pneumatic flaps | 1 | Lot | 15,000 ₹15,750 Lowest |
| 7.00 | Supply of Solenoid valve Suitable for operating the above 2 way flap | 1 | Lot | 10,000 ₹10,500 Lowest |
| 8.00 | Supply of limit Switches - 2 Nos for the flap indication | 1 | Lot | 5,000 ₹5,250 Lowest |
| 9.00 | Supply and installation of suitable electrical power cable and control cables and control cables with glands, lugs clamps, isolation for connecting with the new conveyor. Existing cable can be utilized for elevator copper/aluminum cables | 1 | Lot | 20,000 ₹21,000 Lowest |
| 10.00 | Required structure, Roof Sheeting and slide sheeting at the top boot of the Elevator and a bridge for the conveyor with suitable spacing for any repair/maintenance work. GI Platform with fencing and roofing | 1 | LS | 1,35,000 ₹1,41,750 Lowest |
Tender Value
₹55 L
EMD Value
₹55,000
Closing Date
11 Mar 2026, 3:00 pmClosed
MANAGING DIRECTOR
MILMA BHAVAN PATTOM PALACE P O TRIVANDRUM
Design, Supply, Installation and Commissioning of New Maize Feed Silo Elevator and Conveyor, along with Dismantling of Existing Elevator at Cattle Feed Plant Malampuzha Palakkad District
2026_KCMMF_829868_3
KCMMF/KHO/PROJ/558/2025
Open Tender
Miscellaneous Works
Item Rate
180 days
CATTLE FEED PLANT MALAMPUZHA
AS INDICATED IN TENDER DOCUMENT
2 documents required · 2 mandatory
₹2,950
₹55,000
23 Jul 2026
4 Mar 2026
12 Mar 2026
4 Mar 2026
11 Mar 2026
4 Mar 2026
4 Mar 2026 - 11 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling the Existing Maize elevator and stacking the scrap material as directed by the engineer in charge, Dismantling & Relocating the Existing chain conveyor | 1 | Lot | - | - |
| 2 | Supply and installation of Galvanized Silo Maize Unloading Bucket Elevator – 10” (for handling Maize, Oil Cakes & bran of particle Size 1 to 10mm). The elevator system consists of MS elevator-seamless, Bucket fixing bolts With rubber Belts and all trough sheets will be of Galvanized Iron With adequate thickness. Drive is 7.5 HP Geared Motor of SEW Make | 1 | Lot | - | - |
| 3 | Supply and Installation of Redler Conveyor With Drive at the outlet of the Maize Elevator. The entire Conveyor Will be Galvanized Except for the chain & will independently feed one of the silo. Drive is shaft mounted unit of SEW of 3 HP | 1 | Lot | - | - |
| 4 | SS Gravity Pipe 3mm thick, 250 mm dia with required no. of end flange for fixing on elevator outlet / flap approx., 6m (3m each) | 1 | Lot | - | - |
| 5 | Supply of SS Pneumatic type two way flap suitable for fixing on 250 mm pipe along with connecting chute with inspection door with proper locking arrangement on both side, 3mm SS Fabricated body, Rod EN8 | 1 | Lot | - | - |
| 6 | Supply of ½” GI Pipe for air distribution to Pneumatic flaps | 1 | Lot | - | - |
| 7 | Supply of Solenoid valve Suitable for operating the above 2 way flap | 1 | Lot | - | - |
| 8 | Supply of limit Switches - 2 Nos for the flap indication | 1 | Lot | - | - |
| 9 | Supply and installation of suitable electrical power cable and control cables and control cables with glands, lugs clamps, isolation for connecting with the new conveyor. Existing cable can be utilized for elevator copper/aluminum cables | 1 | Lot | - | - |
| 10 | Required structure, Roof Sheeting and slide sheeting at the top boot of the Elevator and a bridge for the conveyor with suitable spacing for any repair/maintenance work. GI Platform with fencing and roofing | 1 | LS | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
BOQ_1423899.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .