Installation of Street Light behind SS#6 peripheral Road for Security reason

Amount

Materials

Mat Code: M04-C01-00373, CABLE,4C,16MM2,1100V,AL,PVC 4 C,16 MM2,1100 VOLT GRADE,PVC INSULATED,ARMOURED,PVC INNER AND OUTER SHEATHED POWER CABLE WITH AL CONDUCTOR (IS: 1554 PART-I)

Mat Code- M04-L02-00360,LED,STREET LIGHT,150W FOR STREET LIGHT ( System Wattage-150W (Suitable to replace 250W HPSV) CCT-Not below 5700K LED Chip Wattage-3W-5W ±10% SMD Ingress Protection-IP66 Rated Luminous Flux-# 16,500 Lm Luminous Efficacy-Not below 110 lm/w CRI-Min 70 Driver Efficacy-> 85% Total Harmonic Distortion-Max 10% Operating Voltage and Frequency Range-120V # 300V AC, 47-53 Hz Input current-Max 650mA Rated voltage -240V, 50Hz, AC Driver Protection-Open Loop, SC, Double phasing, O/V @300V+5V )

Street light installation

Laying of cable upto 4X 16 sqmm ( underground trench 460 mm wide x 760 mm average depth<(>,<)> with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. )

Erection of Street light Pole ( as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. )

Supply of 8.5 Mtr Street Light Pole ( TYPE: SWAGGED AND WELDED M.S STEEL TUBULAR POLE. DESIGNATION: 410 SP-20 (IS: 2713-1980). OVERALL LENGTH: 8.5 MTR. LENGTH OF SECTION: BOTTOM-5 MTR, MIDDLE-1.75 MTR, TOP-1.75 MTR. OUTSIDE DIA OF SECTION: BOTTOM-139.7 MM<(>,<)> MIDDLE-114.3 MM, TOP-88.9 MM. THICKNESS OF SECTION: TOP-4.85 MM, MIDDLE-3.65 MM, TOP-3.25 MM. SIZE OF M.S BASE PLATE: (300X300X6) MM. SIZE OF BRACKET: 1.5MTR LONG AND 40 MM DIA WITH TOP COVER. APPROX WT. OF POLE: 115 KG. PIPES ARE AS PER IS-1239 OR 1161 CERTIFIED. PROVIDE TEST CERTIFICATE. POLES ARE PAINTED WITH RED OXIDE AND BLACK BITUMINOUS. WARRANTY: 01 YEAR, PROVIDE WARRANTY CERTIFICATE FROM MANUFACTURER. MAKE: CALCUTTA POLES OR EQUIVALENT )

CC Base block-Muffing ( Dimension .60*.60*.76 Mt above ground level neatly cemented fishing (3 mm thick) at base pole suitable for alkathene/polythene pipe entry as directed for street light wiring S&f 25cm*25cm*10cm GI loop Box,16 SWG & include drilled Hole in the pole. )

Painting of Pole

Supply and fixing of panel with canopy

Fixing of Light with clamp

Supplying Thermo Plastic Polystrene ( Cable Junction box of size not less than 300mmX300mmX170mm with IP65 degree of protection, dust proof, water tight, light weight, Acid resistant, Corrosion proof, Insulated and shock proof, fire retardant, Halogen & Silica free non-toxic material with internally embedded gasket. Glow wire tested in accordance with IEC 60695-2-11:750®C(Test Certificate required)& fitted with 4 way stud type terminal- 1 no.,Earth terminal- 1 no.,MCB 6A SP - 1 no.Make:Hensel or equivalent )

Wiring of street light pole including ( supply of 3 core 1.5 sqmm unarmoured cable of Havells,KEI,Phinolex,mescab ,polycab )

Fixing of JB on Street light pole with

Supplying and fixing compression ( Type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables of 4CX16sqmm. )

Finishing the end of 4CX16sqmm

GST as applicable will be paid extra on production of proper documents.

HAPPY THOUGHTS NIRMAN

M/s k.J Construction

M/S EUREKA ENTERPRISE

PROJECT CONSTRUCTION SERVICES

S. B. ELECTRICAL