RENOVATION OF KITCHEN IN CERTAIN OMQs AT AF STN VADODARA

Amount

Taking down chowkats or frames n exc 1.5 Sqm each (without taking off shutters from the frames) all as specified and as directed.

Taking down shutters of any description n exc 1Sqm all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the frames) all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

S&F Powder coated aluminium frame for door, windows and ventilators and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing etc complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane

S&F 4mm thick frosted Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading.

Dismantling structural steel work including doors, gates ,grill but excluding framed truss etc. all as specified and as directed.

S&F framed work such as door frame, grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new Steel Surfaces and applying 2 coats of Synthetic Enamel Paint of any description, over 10cm in width or girth,not otherwise described over a coat of red oxide Primer

S & F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F Auto SS Hinges 304 grade of crank 0 degree to 90 degree fixed with screw to PVC Sheet and frame complete all as specified and directed.

S & F Chromium plated decorative type S S Handle 200mm long all as specified and directed.

S & F Powder coated aluminium decorative Profile handle 20" long all as specified and directed.

S&F Factory made flush shutters 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed..

S&F 125mm long SS butt hinges and fixed to frame with screw complete.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F aluminium alloy anodized sliding door bolt of length 300mm with hasps and staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts of extruded sections or cast aluminium alloy and fixed.

S&F 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

S&F floor door stopper of overall length of cover plate 100 mm (ISI Marked) aluminum alloy body and tongue double legged anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

S&F 150mm size hasp and staple,safety type aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F SS plate rack 1mm thick of Size 31"x36"x10" complete all as speicifed and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar.

M&L 20mm thick granite slab with fully rounded edges on front face fixed with adhesive or laid in neat cement slurry over 10mm thick screed bed in CM 1:6 including cutting space for sink & gas pipe hole all as specified and directed in Engineer -in -Charge.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed.

Taking down cement plaster any description on brick or stone wall/ celling including raking out joint , hacking for key, scrubbing down with water etc.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement.

M&L for rendering 5mm thick on concrete surfaces of ceiling in CM 1:3, finishing the surface fair and even complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coat of oil bound distemper complete all as specified (any tint/ shade as approved by GE) and directed.

M&L for preparation of old/new surfaces and apply 1 1.5mm thick mm thick JK/Birla Cement on wall/ceiling finished complete all as speicifed and directed.

All as per item no. 35 above but three coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coat of oil bound distemper all as specified (any tint shade as approved by GE) and directed.

Preparation of new plastered surface and applying 3 coats of white wash on Ceiling surface complete all as specified and directed

S & F in repair sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S & F in repair for 15 mm bore Chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed.

Demolition of brick work or stone/ boulders mansory built in cement mortar including all quoins, archs, pillars,etc all as specified and as directed.

Providing and fixing Factory made 18 (+0.7) mm thck PVC sheet one sided pre laminated sheet cabinet shutter of density 600 Kg/cum bent at 90 degree and finished all edges at all levels, for making edges and outer surface of shutter lipping/bedding or 0.5mm tick PVC Sheet lipping at all four edges using bonding tape and l type bracket as required 1"x1" etc. complete all a per Manufacturer's

S&F Zinc Coated SS Steel ball type 20 " telescopic channel hydraulic 1" width including all necessary fittings complete in all respect as specified

S&F SS cutlery basket with Dimension (425x500 x 100 mm) incl all necessary fittings complete in all respect all as specified and directed.

S&F SS kitchen Thali basket with dimension ( 425 x 500 x 200mm) incl all necessary fittings complete in all repsect complete all as specified and directed.

S&F SS Kitchen Dish/ Thali basket with dimension (425 x 500 x 150 mm) incl all necessary fittings complete in all respect complete all specified and directed.

S&F SS Cup and saucer Modular Kitchen Basket with Dimension ( 425 x 500 x 100 mm) incl all necessary fittings complete in all respect complete in all respect complete all specified and directed.

S&F Rectangular SS plain Modular Kitchen jali Basket with Dimension ( 425 x 500 x 150 mm) complete in all respect complete in all respect complete all specified and directed.

S&F Rectangular SS plain 6mm 304 Grade (Full sheet) Modular Kitchen Basket for vegatables with Dime (425 x 500 x 200 mm) incl all necessary fittings complete in all respect complete in all respect complete all specified and directed.

Demolition of reinforced cement concrete any description and in any position and in any position not otherwise specially provided for complete all as specified and directed.

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.

BEYLIM INFRA (BID ID -3461829)

M.A. MUNSHI AND CO. (BID ID -3460742)

VINUBHAI P. CHANDRA (BID ID -3460383)

jagdish machinery stores (BID ID -3460714)

Harsh Infrastructure (BID ID -3461844)

M/s Soham Construction (BID ID -3461990)