Strengthening of Road (Resurfacing of Internal Roads and Road marking work on internal roads in Sector-144 5 pesent) Noida

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Providing and applying tack coat using hot straight run bitumen of grade 80/100, On bituminous surface @ 0.50 Kg / sqm

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading. Premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with Hydrostatic paver finisher with sensor contral to the required grade. level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density compaction as per MORTH specification, clause No.507 comlete in all respects.

Road Marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250gm per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.Rates are inclusive of all taxes, royalty etc all T&P/machine material and labour required for proper completion of work

REFLECTIVE RAISED PAVEMENT MARKERS (CAT EYE/ ROAD STUD) : Supply and Fixing of raised pavement markers with made of Plastic body of RPM/Road Stud shall be moulded from ASA (Acrylic Styrene Acryonitrite) or HIPS (High Impact Polystyrene) or ABS (Acryonitrite Butadien Styrene or Any other suitable material approved by the Engineer. The marker shall support a load of 13,635 tested in accordance with the ASTMD4280. The reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of light entering the lens face. Lenses shall be moulded of methyl methacrylate conforming to ASTM D788 or equivalent. The stop or retro reflective surface shall preferably be 35+/-5 degrees to base and the areas of each retro-reflective surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20mm & width shall not exceed 130mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture, epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro reflectance of the reflective panel, to the Engineer. In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-charge. RPM (with Shank)

Retro Reflectorised Signs (Stainless Steel Frame and Post with both side signs) Supply and fixing of reflective sign board (Both side) of size 1.50 x 1.20 m retro reflective sheeting of HIP grade type-iv, the board shall be fixed on 50 mm SS 304 grade pipe and reflective sheet on 4 mm thick ACM sheet of standard make as per MORTH specification. The Board shall be fixed using 2 man post band and grinder property including butting so as to give uniform shining at welded joints. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance. 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specifications (D-4056-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/ Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MORTH specifications No 801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender.

SOLAR POWER ROAD MARKERS (SOLAR STUDS) : Providing and Fixing Solar studs that shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by Engineer. Its water resistance shall meet the requirements of IP65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100mm x 100mm x 10 mm. It shall have super bright LEDs so as to provide long visibilty from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. It should be able to give the prescribed performance in the temperature range of -40 degree Celcius to 55 degree Celcius. Its life should not be less than 3 years. The rate shall include all materials, labour, equipment, fabrication, transportation, erection, installation and incidentals all complete as per direction of Engineer-in-charge.