SPL REP (ROOF ONLY) BLDG NO T-9 T-21 T-27 EW-36 T-38 EW-39 AT PRC, PROVN OF 05 AC (02 TON) INCL 01 HOT COLD, 01 AC (1.5 TON) HOT COLD FOR 02 X JCO MESS (ANTE/CLUB ROOM, DINNING HALL(01 X ADM BN 01 X CLK MESS), 01 X SAINIK INST AT SRC RAMGARH

Amount

Dismantling old asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge complete all as specified & directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

M&L for rendering 15 mm thick on other than fair face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying 3mm thick wall care putty(J K /BIRLA) in two layers to make entire surface free from undulations complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick )complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick )complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer including necessary scaffolding complete all as specified & as directed.

M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint on old steel painted surface complete all as specified & directed..

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in levelling course, coping, window cill etc finished even and smooth without using extra cement including necessary formwork complete all as specified & directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work with using sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for Brick work with using sub class 'B' bricks but except bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. Note: Bricks retrived from here in before item No,13 of BOQ.

M & L for 4.00 mm thick plain tinted sheet glass ordinary quality and glazing with oil putty exceeding 0.50 Sqm in each glazing with oil putty or aluminium frame/shutters with rubber neoprene beading ,fixed in repair complete etc all as specified & directed. .

S & F in repair Galvanised mild steel wire cloth .0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair brass CP bracket fancy type suitable for fixing to 25 mm dia curtain rod complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 19mm/20 mm dia curtains rod of chromium plated mild steel tubing(1.00mm thick wall thickness) fixing with & including for fancy type brackets,stops, rollers etc.,complete all as specified and as directed by Engineer-in-Charge. Note: Running length of curtain rod shall be measured & paid only.

S & F 150 mm long (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed

M&L for aluminium 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed.

S & F for aluminium (extruded section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete etc all as specified & directed.

Dismantling wall and ceiling boarding with frame work of any description, fixed in any position with nails/screws complete all as specified and directed.

S & F for providing aluminium snap grid frame work for false ceiling system with size 605 mm x 605 mm, consisting of main runner of size 36.5 mm x 25 mm x 1.4 mm (weight not less than @ 0.24 Kg/Rm) and cross Tee of size 23.5 mm x 36.4 mm x 1.4 mm (weight not less than @ 0.191 Kg/Rm). The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40 mm X 25 mm X 2 mm (weight not less than @ 0.36 Kg/Rm).The snap grid shall be fixed to ceiling supporting hangers consisting of 6 mm dia. G.I wire , J-bolts ,nuts and washers as per manufacturer's instructions or adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and complete all as specified and directed by Engr-in-Charge.

M & L for 6.0 mm thick Non asbestos fibre cement building boards fixed in ceiling flat or sloping fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed by Engr-in-Charge.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M&L for prepartion of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint (ordinary tint) any colour on old wooden painted surface complete all as specified & directed.

Demolition of Plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets ,light fittings etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.

Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and directed.

M&L for point wiring for one light/fan point /exhaust fan controlled by one , one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box covered for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.

All as per item No .33 here-in-before but 3 pin socket outlet 5 Amp socket outlet on same board.with other switches

All as per item No .33 here-in-before but 3 pin socket outlet 5 Amp socket outlet on independent board.

S&F Switch piano flush button single pole one way 5 Amps, complete all as specified and directed.

M&L for point wiring for one light/fan point controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable for 16 amp 3/5 pin socket power point conforming to IS:694,1100V grade AC, single core having multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC surface conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in surface wiring system & 2.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated sheet top cover make sheet for housing/ fixing switches etc.,including cutting holes for switches,sockets,regulators etc as per requirement including flugs required complete all as specified and directed.Note: Proper colour coding to be adopted.

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal complete all as specified and as directed.

S&F fan regulator electronic, step type hum free, socket type, suitable for ceiling fans of any capacity, pre wired 230 volts AC 50 HZ supply 100/120 Watt complete all as specified & as directed

S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as specified and directed.

S & F in repair LED bulb of capacity 10 watt , lumen out put (1200)lm ,length 102 mm dia 56 mm , base cap B22 (ISI mark) ,three star rated lamp with all accessories complete all as specified and as directed by Engineer-in-Charge.

S & F for LED batten fitting 1x 20W, 220V, AC surface mounting including connecting up with two core flexible copper conductor cable of suitable size with flexible pipe from ceiling rose to fitting of any size complete all as specified and as directed .

S & F in repair sheet metal enclosures (CRCA sheet) dust & vermin proof for DBs when MCBs to be used in single pole and neutral (SPN) double door 415Volts, 08 way, suitable IP protection with magnetic locking system including necessary provision for inserting the the DBs in wall & suitable rated amp bus bar and neutral link (ISI marked) complete all as specified and as directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified.

S&F miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 5 Amp to 32 Amp , 240V ,breaking capacity 10 KA, 'C' curve in the MCB DB complete with connection testing and commissioning including suitable size copper lugs complete all as specified and as directed.

Labour only for the refixing ceiling fan/exhaust fan after servicing /repairing/overhauling by cleaning/greasing /oiling etc. including provision of connecting ceiling fan/exhaust fan to ceiling rose including three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection and preparation of old rusted surface of ceiling fans of any sweep by cleaning to remove only dust etc. and applying one coat of synthetic enamel (white shade) paint and marking MES number with non erasable marker pen with black colour complete all as specified & directed by Engineer-in-charge. Note :celing fan obtained from item No 32 of BOQ here in before.

M & L Sub main wiring with two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Two runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.

M & L Sub main wiring with four runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Four runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as specified and shown in electrical plate No.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate )chamber with RCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) , 40 mm thick pre cast RCC cover with TMT 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering including taking down of existing earthing complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, returning, filling in and removal etc

Supply, installation and testing hi wall Split indoor/outdoor complete Air Conditioner, electric driven, single phase, 230 Volts, 50 Hz of capacity 2 TR with high efficiency with in built air ionizer and plasma filter for better indoor air quality unit complete with PCB board and with cordless remote control unit operation system with refrigerant gas, minimum BEE 5 star rating,AC supply complete including copper pipe insulation etc and above complete all as specified and directed with comprising of following .:-(a) Indoor unit with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising of Compressor with motor, air cooled copper condenser with fan and motor unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) for Installation powder coated MS bracket fixed on wall as per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly 2 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer shall in quoted rate under this item. Make: O-General/Mitsubshi/Daikan

Supply, installation and testing hi wall Split indoor/outdoor complete Air Conditioner, electric driven, single phase, 230 Volts, 50 Hz of capacity 2 TR Hot & Cool with high efficiency with in built air ionizer and plasma filter for better indoor air quality unit complete with PCB board and with cordless remote control unit operation system with refrigerant gas, minimum BEE 3 star rating,AC supply complete including copper pipe insulation etc and above complete all as specified and directed with comprising of following .:-(a) Indoor unit with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising of Compressor with motor, air cooled copper condenser with fan and motor unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) for Installation powder coated MS bracket fixed on wall as per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly 2 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer shall in quoted rate under this item. Make: O-General/Mitsubshi/Daikan

Supply, installation and testing hi wall Split indoor/outdoor complete Air Conditioner, electric driven, single phase, 230 Volts, 50 Hz of capacity 1.5 TR Hot & Cool with high efficiency with in built air ionizer and plasma filter for better indoor air quality unit complete with PCB board and with cordless remote control unit operation system with refrigerant gas, minimum BEE 3 star rating,AC supply complete including copper pipe insulation etc and above complete all as specified and directed with comprising of following .:- (a) Indoor unit with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising of Compressor with motor, air cooled copper condenser with fan and motor unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) for Installation powder coated MS bracket fixed on wall as per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly 1.5 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer shall in quoted rate under this item. Make: O-Genral/Mitsubshi/Daikan

Supply and fix Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 285 V with output voltage stablized at 230 V with accuracy of + 2.5 % and capacity 5 KVA complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp breaking capacity 10 KA ,"C" series complete all as specified and as directed.

.S & F sheet metal enclosures (CRCA sheet) dust & vermin proof for DBs when MCBs to be used in single pole and neutral (SPN) double door 415Volts, 04 way, suitable IP protection with magnetic locking system including necessary provision for inserting the the DBs in wall & suitable rated amp bus bar and neutral link (ISI marked) complete all as specified and as directed.

M & L for point wiring for AC point controlled by one way 15 amp switch one way/metal clad industrial socket with 1100 volt grade PVC insulated FRLSH 4.0 Sq mm multi stranded copper conductor cable with continuous earth wire of 4.0 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed FRLSH, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia including clamps, screws gutties/plug etc & sunken anodized pressed sunken boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches fixed with brass screw complete all as specified and directed.

Supply, laying , jointing & testing LT under ground cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty) with standard aluminium conductor , 1100 Volts grade of cross sectional area 16 Sqmm 4 core including taking down existing cable complete all as specified and directed

S & F 40mm dia GI pipe light grade for protection of LT UG cables for crossing roads/on wall/poles etc including coupling/ jointing fittings etc.,complete if any all as directed and specified

Excavation in trenches in any type of soil not exceeding 0.45 metre deep and not exceeding 0.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/ pipes, foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L sand filling in cable trenches for cable protection for clean dry sand unwashed including gently punning in a layer of 15 cm and 8 cm (total 23 cm) inthickness all across the laid portion of LT cable in trenches complete all as specified and directed. (Note:-Punned thickness shall only be considered for payment)

Supplying & Laying factory made un-reinforced pre-cast flat concrete cable protection cover of class LV , type- I, size 250 mm x 150mm x 40mm, complete all as specified and directed by the Engineer-in-Charge.

Taking down existing serviceable tube light fitting /any serviceable LED light fitting of any wattage after disconnecting all necessary electrical connections from ceiling rose to fitting and refixing the same anywhere as directed by the Engineer-in-Charge complete all as specified as directed.

simplex infra project (BID ID -3300643)

M/s Ray construction (BID ID -3306527)

upadhyay engineers and consultant (BID ID -3300557)

M/S PARAS NATH SINGH (BID ID -3299416)

M/S Bhushan Kumar Jain (BID ID -3301157)