Supply and installation along with comprehensive and ergonomic solution for Office plus Modular Furniture for newly constructed DM and Collector office, North Tripura District

Select, Excess (+), Less (-)

Additional Workstation Chair---(Providing, fitting & fixing of "Workstation Chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range). It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon.)

Cushioned Leatherette Chair---(Providing, fitting & fixing of "Revolving Chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range). It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized de

case of metal hinged door unit. Hinges: Hettich hinges with CED coating for extended corrosion resistance. Hettich sensys soft closing hinges. Legs: Hettich make PVC height adjustable legs. (100mm/ 150mm). Skirting: Rehau make PVC Co-extruded skirting in metallic silver and black color. (100mm / 150mm). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.)

Name of the Bidder/ Bidding Firm / Company :

Item No. Multipurpose Leatherette High Back chair---(Providing, fitting & fixing of "Revolving chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 Item Code / Make Fabric Full Back Chair---(Providing, fitting & fixing of "Revolving Chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency aler of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) Excise Duty in Rs. P GST in Rs. P Freight Charges ( Unloading & Stacking) in Rs. P Any Other Taxes/Duties/Levies in Rs. P Other Taxes 2 in Rs. P IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax in Rs. P Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category in Rs. P TOTAL AMOUNT Without Taxes in Rs. P Amount (Col-4 X Col-13) TOTAL AMOUNT In Words

1 Wooden Caddy Rack with tray, size: 1038 (W) x 450 (D) x 1000 (H) mm.---(Providing, fitting & fixing of "Wooden Caddy Rack with tra" Product size: Width: 1038mm (±10), Depth: 450mm (±10), Height with Castor: 1087mm (±10). Construction: Rigid knock down construction. Material: Side panels,Top/Bottom panels, and shelf panels are made from 18mm Thick Pre–laminated board of E1-P2 grade and approved shade confirming to IS 12823:1990 with 2mm thick PVC edge lipping. Powder Coated 0.8mm thk CRCA sheet (IS:513) is used as Back panel. Metal Frame : The Metal Frame is fabricated by Argo Shield welding of MS ERW Tube 40 mm x 20 x 1.2 mm thk (IS:7138) along with 3mm thk HR (IS 2062) L-shaped plate on both sides of the frame. Bush made of MS Rod is used for supporting the castors at the bottom of the frame. Lockable castors are used for free motion of the unit. For ease of mobility two powder coated handles are provided on top of the unit. Shelves: Amigo Mobile Caddy has 6 fixed shelves. First Row of shelf is placed at a distance of 326mm from top surface. Uniformly distributed load capacity per each shelf is 21kg. Product size: Width: 312mm, Depth: 427mm, Height: 75mm. FOR DEEP F2 TRAY: Width: 312mm, Depth: 427mm, Height: 150mm. Construction: Knock down construction. Material: Plastic trays with two varying sizes are available for use. 3 Shallow F1 Trays can be fixed within the cubicle with the help of runners on both sides of the tray. One Shallow F1 Tray and one Deep F2 Trays can be fixed within the cubicle with the help of runners on both sides of the tray. Each pair of StopSafe runners is supplied with a set of clips that attach to the back of any tray. When StopSafe runners are fixed, the trays can be pulled out upto a certain distance only. The tray is then held firmly in place. To pull the tray completely out simply tilt it upwards. Trays are available in 4 colors. Refer Color Chart for more details. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV item1 2 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item1 213 Nos

2 ) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item2 6 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

3 Executive Desk with return Unit, Overall Size: 2100 (W) x 1600 (D) x 765 (H) mm.---(Providing, fitting & fixing of "Executive Desk with return Unit" MAIN TOP :1800 X 795 MM (±10); Particle-board ( Melamine Finish)25mm Top + 15mm frame; 2mm PVC Lipping on top and 0.35mm PVC Lipping on frame.MODESTY PANEL :1100X405X 16mm (±10) THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping.DRAWER FRONT : 500 X 170 X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping.KBPT :578 (W) X 284 (D) X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping.ERU :1600 (L) X500 (W) x 650 (H) (±10) all panels are 16mm THK Particle-board ( Melamine Finish)with 0.35mm THK PVC Lipping. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item3 1 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

4 Queen Size Mattress, 72 x 60 x 5---(Providing, fitting & fixing of "Queen Mattress" Number of Layers: Two Layers. Thickness of Top Layer (Tolerance :- ± 2 mm): 125 mm. Thickness of Bottom Layer (Tolerance :- ± 2 mm): 100 mm. Material of Top Layer: PU Foam. Material of Bottom Layer: PU Foam. Top Layer Density: 18 kg/m³. Bottom Layer Density: 18 kg/m³. Quilting: Both Side Quilting (Double Sided). Thickness of Quilting (± 2 mm): 8 mm. Mattress Top: Box Top. Mattress Cover Fabric Composition: Polyester. Dimensions (Tolerance ±15 mm): 1829 mm x 914 mm. Warranty (In Years): 1 year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item4 8 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

5 Single Desk cum Chair---(Providing, fitting & fixing of "Single Desk cum Chair" All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have corners rounded for safety usage.Understructure:All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx.18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating.Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min.45 micron thickness of epoxy polyester coating.The understructure is assembled using M6 trilobular screws(As per DIN 7500) with Zn blue plating(As per IS 1573:1986).Compact Laminate seat and back panels are assembled using M6 Countersunk trilobular screws(As per DIN 7500) with Zn black plating(As per IS 1573:1986).Spacers are provided on the top of round tubes for wooden panels fixing.They are made of PP Glass filled(30%).Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. Size: 620 (W) x 990 (D) x 537 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item5 1 Cum 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

6 Centre Table, size: 1000 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of "Centre Table" Overall Size : W x D x H - 904 x 444 x 411mm. (±10)1. Body: All panels are made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. The drawer is fitted with two way slides so that it can be opened from both sides. Bottom & middle horizontal panel provides storage area. Four nylon bushes are provided. 2. Top: 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. 3. Construction: Knock-down. 4. Finish: PLT panels are in WENGE shade having SUEDE finish. UV guled plates un item6 1 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

7 der glass have SUNRAY finish. 5. Hardware: Dowels for knockdown assembly with high quality standard hardware like screws, two way drawer slides and nylon bushes etc. 6. Packet: One packet. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item7 6 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

8 Wooden Storage, size: 1050 (W) x 1040 (H) x 450 (D) mm.---(Providing, fitting & fixing of "Wooden Storage" Construction & Metarials:Construction is a knockdown construction of 25 mm thk and 18 mm thk pre-laminated board with metal cladding of 0.8 mm thk C.R.C.A. from outside.Side metal cladding is coated with epoxy polyster powder of 50 ± 10 microns thickness.Top:wooden top is provided which is made of 25 mm thick pre-laminated board.Door & Door opening:single door opening for 450 & 600 W units whereas two door opening.The doors are made of 18 mm thk pre-laminated with decorative laminate on one side and backing laminate on the other side.Shelving:Height wise adjustable shelf mounting holes provided on side panels for easy interchange of shelf height as required.Fixed shelves along with adjustable shelves provided.Uniformly distributed load capacity for each shelf is 40 kg maximum.Skirting Option:The skirting units are provided with 150 mm high skirting made of 0.8 mm thick C.R.C.A. coated with epoxy polyester powder of 50 ± 10 microns thickness.Leveler:Screw type adjustible leveler with plastic base provides vertical adjustment for floor unevenness and leveling of units.Back Panels:Back panels are made of 18 mm thick pre-laminated boards with options of decorative laminate as well as fabric finishes.Locking Mechanism:3-way nickel plated wooden furniture lock is provided for effective and positive locking of doors.Handle:Aesthetically appealing recessed handles of aluminium extrusion are provided for easy opening and closing. Size: 922 (W) x 750 (D) x 460 (H) mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item8 1 Cum 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

9 Steel Office Table, size: 1350 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Steel Office Table" Worksurface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Leg:Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).CPU Modesty:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt.Pedestal:Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Drawer Front:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier:0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Size: 1350 (W) x 750 (D) x 728 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item9 1 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

10 Office Steel Table, size: 1500 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Steel Office Table" Worksurface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Leg:Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).CPU Modesty:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt.Pedestal:Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Drawer Front:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier:0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Size: 1500 (W) x 750 (D) x 728 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , item10 7 Sqm. 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

11 GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item11 3 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

12 Single Bed with Mattress---(Providing, fitting & fixing of "Single Bed with Mattress" Net Weight (kg)-40 Finish Color- Black Dimensions W x H x D (cm)- 208 x 84 x 92.5 (±10) Style- Contemporary & Modern Primary Material- Metal Warranty- 1 Year Warranty Storage Included- No Storage Mechanism- No Storage Delivery Condition- Knock Down Headboard Included- Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item12 31 Sqft 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

13 Storage, size: 1830 H x 914 W x 463 D---(Providing, fitting & fixing of "Steel Storage" Size:915 mm (W) x 486mm (D) x 1981* mm (H).(±10) Construction & Material:Welded construction.0.8 mm thk CRCA for Shelf & 0.9 mm thk CRCA for all other components.Door:Glasses fitted to full height steel frame.Locking:2 way locking mechanism with shooting bolt.Handle :Chrome plated brass handle.Shelving :Height wise Adjustable Shelves 4 Nos.Uniformly Distributed Load Capacity per full shelf is 80 Kg maximum.Leveler:M10 Screw type leveler with hex plastic base.(add 10mm to unit height and additional 10mm for adjustment.).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item13 2 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

14 Corner Table, size: 600 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of "Corner Table" Dimensions W x H x D (cm)-45 x 45 x 45 (±10) Material : 18 mm thk prelaminated particle board Shade : Remini Walnut Construction : Knock down Finish : 1) MIP lamination in Remini Walnut shade with matching lipping in Matt finish 2) MIP lamination in Cloud Grey shade with matching lipping in Matt finish. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item14 25 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

15 Steel Storage, size: 1830 H x 914 W x 463 D---(Providing, fitting & fixing of "Steel Storage" Size: Plain : 900 mm (W) x 450 mm (D) x 1830 mm (H).(±10) Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel - Panels from 0.6 mm thick & Front frame, Shelf 0.8 mm thick.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Plastic Recessed Handle cum Cam Lock 3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain : 4 Nos. of Adjustable Full Shelves.Top Plain : Metal Top.Finish Epoxy Powder coated to the thickness of 50microns (+/-10). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificat item15 167 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

16 e other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item16 1 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

17 Small Amirah, size: 1168.5 (H) x 900 (W) x 450 (D) mm.---(Providing, fitting & fixing of "Steel Small Amirah" Top:900 mm (W) x 450mm (D) x 1167.5mm (H).(±10) Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel - Panels from 0.6 mm thick & Front frame, Shelf 0.8 mm thick.Configuration (Door):Full height Steel Hinged Door. Locking & handle : Plastic Recessed Handle cum Cam Lock.3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Minor : 2 Nos. of Adjustable Full Shelves.Top Plain : Metal Top.Leveler (only for Minor)Minor : Screw type leveler with hex plastic base (add in unit height min.8 mm & additional 5 mm max for adjustment).Finish:Epoxy Powder coated to the thickness of 50microns (+/-10). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item17 3 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

18 3 Seater Steel Lounge Chair with arm white---(Providing, fitting & fixing of "3 Seater Steel Lounge Chair" The seat shell is a welded assembly of seat,back and side frame.The seat and back are made of 0.12 ± 0.013 cm thk CR steel sheet with oblong perforations.They are welded to sideframe of size 3.2 ± 0.05 cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly is powder coated.The seat has a front water fall edge to provide popliteal clearance for comfortable seating.It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back.Clean and flat surfaces of seat and back aids in easy maintenance.Sear size:47.8 cm (W) x 44.6 cm (D).(±10) Back size:41.6 cm (W) x 23.0 cm (H).(±10) Understructure assembly consists of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5 ± 0.03 cm x 0.2 ± 0.016 cm thk.The welded structure assembly is powder coated.The leg assembly is fitted with shoes and levellers in nylon.The leg structure is designed with minimal area of contact close to ground providing easy access for cleaning purposes.The shoes fitted to leg assembly help in aligning the structure for back to back arrangements.Levellers take care of uneven flooring.Connecting beam is fitted with snap locking end cap.It also aids in side-by-side understructure alignment. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item18 3 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

19 Revolving Chair for workstation---(Providing, fitting & fixing of "Revolving Chair" The cushioned seat assembly consists of seat base moulded in glass-filled poly-amide,moulded polyurethane foam & upholstered with high stretch knitted polyester fabric.The cushioned back assembly consists of back inner moulded in polypropylene in - situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric.Back size:45.5 cm (W) x 53.0 cm (H).(±10) Seat size:48.5 cm. (W) x 47.0 cm (D).(±10) The HR polyurethane foam used in seat and back cushion is moulded in density 45 ± 2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back,without need for complex manual adjustments.The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes.The "S"shaped spines moulded in high strength glass-filled poly-amide and the spine connector moulded in glass-filled poly-amide form the back-spine structure involved in multi-dimensional recline motion.The variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which is inbuilt in seat base and the tension is user weight dependent.The assembly is having fixed arm rest structure moulded in glass-filled poly-amide.The armrest top is made up of integral skin PU moulded over plastic inner moulded in glass-filled poly-amide.The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm.The pedestal is injection moulded in glass-filled poly-amide and fitted with 5 nos.twin wheel castors.The pedestal is 66.0 ± 0.5 cm.pitch centre diameter and 76.0 ± 1.0 cm.with castors.5 nos. twin wheel castors are injection moulded in poly-amide having 5.0 ± 0.1 cm wheel diameter and assembled to the pedestal. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organizatio item19 1 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

20 n otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item20 19 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

21 Chair With Arm for reception---(Providing, fitting & fixing of "Chair With Arm" The seat assembly is made up of 1.2 cm.thick hot- pressed plywood,upholstered with fabric upholstery covers and moulded polyurethane foam.Seat size:47.0 cm. (W) x 48.0 cm. (D).(±10) The back asembly is made of powder coated tubular frame of dia 25.4 mm x 2.0 mm thk MS ERW tube designed with contoured lumbar support for extra comfort.The back is upholstered with net fabric upholstery.Back size:46.5 cm. (W) x 64.5 cm. (H).(±10) The one-piece armrests are injection moulded from black Co-polymer polypropylene.The mechanism is designed with the following features:360° revolving type.Upright position locking.Tilt tension adjustment.The pneumatic height adjustment has an adjustment stroke of 9.0 cm.The pedestal is injection moulded in black 33% glass-filled nylon 66 and fitted with 5 nos.twin wheel castors.The pedestal is 66.3 cm pitch-center dia.The twin wheel castors are injection moulded in black nylon.The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item21 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

22 4 Str. CAFETRIA TABLE 1800 X 900---(Providing, fitting & fixing of "4 Str. CAFETRIA TABLE" Worktop is made of Medium density fibreboard, IS:12406 (MDF) 25mm thk PU tops (E1 grade). On top side PU painting of minimum 2H pencil hardness with High gloss and matte on bottom side as per color chart. The Work top is in shape, viz.: (1800x900). Trio legs is fabricated from combination of 1.2 mm, 2 mm thk CRCA (as per IS: 513), 3mm, 5mm thk HR (as per IS: 2062) which has a triangular shape. Argo Shield welding is used for fabrication. This is a three dimensional leg which has inclination in 2 planes, it has a ball socket M8 leveler with bottom translucent cap, that allows adjustment up to 50 mm height. The whole structure is EPOXY POLYSTER Powder Coated (DFT 40-60 microns). It is assembled using Alloy steel hardware (Ni / Zn plated). Size: 1800 (W) x 900 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item22 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

23 Pillow---(Providing, fitting & fixing of "Pillow" Packsize – 25 per pack Weight per pillow – 670 grams Comes in semi-vaccumized packing Size - 43X69cm/17”X27 (±10) 100% soft polyester fabric keeps the pillow durable, light weight & wrinkle resistant Peached polyester fabric for soft & comfortable feel.670 grams eco-friendly PET fiber ensures even support and comfort.Self piping for a smooth & uncomplicated look. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item23 40 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

24 RECEPTION TABLE, 5’ W LINEAR DESK---(Providing, fitting & fixing of "RECEPTION TABLE" Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Ancho item24 8 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

25 r Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit: Made of 18mm Thick Pre laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories: Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Size: 1500 (W) x 870 (D) x 740 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item25 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

26 4 legs Chair With Arm---(Providing, fitting & fixing of "Chair With Arm" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR SLED BASE CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item26 27 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

27 Chair without arm---(Providing, fitting & fixing of "Chair without arm" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL item27 16 Set 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

28 ) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item28 92 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

29 Single Seater Recliner---(Providing, fitting & fixing of "Single Seater Recliner" Features: Power-controlled hugger mechanism reclining into any position with touch buttons near armrest for personalized comfort. Effortless and noiseless movement from upright to fully reclined. 90° to 160° angle within seconds. Stable base due to metal reclining mechanism which is powder-coated, ensuring robust support and longevity. Soft foam in seat and backrest, upholstered with superior finishing, in a cool to touch polyester fabric. Ergonomically designed with high backrest and head support for optimal spine relaxation. Size: 710 (W) x 920 (D) x 1080 (H) mm. (±10) Seat Height: 500 mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item29 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

30 Almirah, size: 1830 H x 914 W x 463 D---(Providing, fitting & fixing of "Steel Storage" Size:Plain (4S) - 916 mm (W) x 486 mm (D) x 1981 mm (H),Construction & Material:Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Mazak Handle.3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain 4S : 4 Nos. of Adjustable Full Shelves.Leveler:M10 Screw type leveler with hex plastic base.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item30 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

31 L SHAPE Desk with Return Desk, size: 1800 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Executive Desk with Return Desk" Unitized desk series is a minimal but comprehensive manager desk range designed for a variety of applications and layouts. The range has 5ft and 6ft wide L-shaped manger tables with pedestals. Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members: Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table. Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Size: 1800 (W) x 750 (D) x 750 (H) mm. (±10) & ERU: 900 (W) x 450 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item31 18 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

32 Storage with G;ass frame in small size. size: 690 (H) X 900 (W) X 470 (D) mm item32 164 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

33 .---(Providing, fitting & fixing of "Low Ht. Steel Storage Unit" Construction:Rigid knock down construction.Material:All major Panels – 0.7 mm Thk CRCA, False Side Panel – 0.9 mm Thk, Bottom Shelf – 0.8 mm Thk CRCA Sheet. Vertical Handle sections for shutters: 1.2mm Thk CRCA sheet.Shutters:PVC Shutters.Standard internal configuration:1 Adjustable Shelf for 690H TDU.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Shutter Opening:The Double shutters operating in opposite direction (i.e. from right to left & left to right) giving full accessibility to inside without disturbing aisle.Locking Mechanism:10 lever Cam lock through lock lever.Finish:Epoxy Polyester Powder coating to thickness of 50 micron (+/- 10). Size: 690 (H) X 900 (W) X 470 (D) mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item33 5 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

34 Leatheret Chair for Conference Room---(Providing, fitting & fixing of "Executive High Back Chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The chair seat & back size are: HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H), SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). ARMRESTS (Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY (EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issu item34 6 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

35 ed by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item35 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

36 Officers High Back Chair---(Providing, fitting & fixing of "Executive High Back Chair" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon. Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item36 4 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

37 Visitor Chair with arm---(Providing, fitting & fixing of "Visitor Chair with arm" CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVE item37 5 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

38 L® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item38 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

39 1 Seater sofa with squre design---(Providing, fitting & fixing of "1 Seater sofa" Features: Asleek sofa with a streamlined silhouette and boxy flare, the sofa is built to ensure with a solid wood framework. The square - padded backrest enhances the overall aesthetics. Sofa, resilient foam provides comfort while the mid backrest offers ergonomic support. Synthetic leather upholstery is easy to maintain. Size: 720 (W) x 765 (D) x 840 (H) mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item39 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

40 3 Seater sofa---(Providing, fitting & fixing of "3 Seater sofa" Features: Asleek sofa with a streamlined silhouette and boxy flare, the sofa is built to ensure with a solid wood framework. The square - padded backrest enhances the overall aesthetics. Sofa, resilient foam provides comfort while the mid backrest offers ergonomic support. Synthetic leather upholstery is easy to maintain. Size: 1640 (W) x 765 (D) x 840 (H) mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item40 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

41 Cafeteria Chair ---(Providing, fitting & fixing of "Chair Withour arm" The seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade UV resistance.Seat size:52.5 cm. (W) x 53.2 cm. (D).Back size: 51.6 cm. (W) x 40.5 cm. (H).The powder coated welded tubular frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W. tube.The shoes are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item41 33 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

42 Lenier Workstation, size: 1200 (W) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Modular Workstation Recta Type" Cello legs: This leg has inclination in one plane. Cello leg has an extrusion cover made of Aluminum alloy which can have different color. Wire Tray: with integrated power box & switch plate (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR. Screen: 6mm thk T mold laminated glass screen on studs is providing on table top. Height 300M above table top. Worktop: 25mm thk prelaminated partical board with pvc lipping. Table Top size: 1200 (W) x 600 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item42 3 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

43 Tuburar Chair With Arm---(Providing, fitting & fixing of "Chair With Arm" The seat and back are made from 1.0cm thk. hot pressed water resistant, commercial plywood upholstered with P.U. foam and fabric.BACK SIZE:42.0cm. (W) X 27.0cm. (H).SEAT SIZE:42.0cm. (W) X 42.0cm. (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m³ and Hardness = 20 +/- 2 kg. on Hampden machine at 25% compression.The understructure assembly is a cantilever type mainframe made of dia. 2.54cm.(1”) x 14 BG M.S. E.R.W. t item43 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

44 ube and black powder coated.The armrests are made in twin tube form using dia.1.58cm. (5/8”) x 16 BG M.S. E.R.W. tube and black powder coated. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item44 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

45 Wooden Centre Table with glass top, size: 1000 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of "Centre Table" Overall Size : W x D x H - 1202 x 594 x 411mm 1. Body: All panels are made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Four nylon bushes are provided. 2. Top: It has top surfaces made of glass & PLT panel. 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with side vertical panels to open upwards. 3. Construction: Knock-down. 4. Finish: PLT panels are in WENGE shade having SUEDE finish. UV guled plates under glass have SUNRAY finish.5. Hardware: Dowels for knockdown assembly with high quality standard hardware like screw, door hinges, bumpers, expanding sockets, nylon bushes etc. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item45 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

46 Desk with Joining Table, size: 3000 (W) x 900 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Executive Desk with Return Desk" Main Material:Particle Board with the density of 680 kg / m³.Surface:CPL (Continuous Pressure Laminate) in 0.5 mm thickness. Process:Postforming in DuckNosed Profile.Edging:2 mm PVC Edging, Black color.Table Top: 25 mm MFC (Melamine Faced Chipboard), plus 30 mm.MDF (Medium Density Fiberboard) black pad.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad.Free standing return desk:Table Top:25 mm MFC.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad.Pedestal:Top Panel:25 mm MFC,All Other Panels:18 mm MFC,Lock,Castors: Provided,Handle:Metal. Credenza:Top Panel:25 mm MFC,Door Panels:18 mm MFC,All Other Panels:18 mm MFC,Handle:Metal.Wardrobe:Top Panel:25 mm MFC.Bottom Panel:25 mm MFC,Wood Door Panels:18 mm MFC.Glass Doors:5 mm.All Other Panels:18 MFC.: 18 MFC Handle:Metal.Joining Top:Top Panel:25 mm MFC.Leg:Metal. Size: Main Desk: 1800 x 900 x 750, Joining Table: 1200 X 1050 X 750.(±10) Return Desk: 1200 X 600 X 730. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item46 31 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

47 Leatheret Sofa1 Seater ---(Providing, fitting & fixing of "1 Seater sofa" 1 seater - Overall Size :Width : 80cm Depth : 82cm Height :85cm Seating Height : 44cm Upholstery •Material : PVC •Shade : Burgundy• Thickness : 1 mm •Weight (GSM) : 575 Frame : •Material : Pine Wood •Moisture content : 10 12 % Foam : •Material : Slab stock Density : Seat 32 kg/m3 and 28 kg/m3 with recron filler Back 28 kg/m3 Webbing : •Material : Nylon •Thickness : 2 mm Legs : •Material : PVC with 70 mm bush. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), Ind item47 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

48 ia Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item48 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

49 3 People sitting sofa---(Providing, fitting & fixing of "3 Seater sofa" 3 seater - Overall Size :Width :171cm Depth : 82cm Height :85cm Seating Height : 44cm Upholstery •Material : PVC •Shade : Burgundy• Thickness : 1 mm •Weight (GSM) : 575 Frame : •Material : Pine Wood •Moisture content : 10 12 % Foam : •Material : Slab stock Density : Seat 32 kg/m3 and 28 kg/m3 with recron filler Back 28 kg/m3 Webbing : •Material : Nylon •Thickness : 2 mm Legs : •Material : PVC with 70 mm bush. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item49 1 Set 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

50 Movable Storage System, Size: 4800 (W) x 5600 (D) x 1980 (H) mm.---(Providing, fitting & fixing of "Movable Storage System" Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated w item50 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

51 ith epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item51 6 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

52 12 bodies Mobile Storage System, Size: 1200 (W) x 5600 (D) x 1980 (H) mm.---(Providing, fitting & fixing of "12 bodies Movable Storage System" Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The sh item52 2 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

53 ared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item53 5 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

54 Storage System on rail 12 bodies, Size: 2400 (W) x 3200 (D) x 1980 (H) mm.---(Providing, fitting & fixing of "12 bodies Movable Storage System" Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mir item54 60 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

55 ror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item55 4 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

56 CRCA Rack, Size: 900 (W) x 450 (D) x 1800 (H) mm.---(Providing, fitting & fixing of "Steel Rack" Type: OPEN TYPE.Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted): 6 nos.Shelves Material: 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513. Depth in mm (±5 mm): 380 mm. Width in mm (±5 mm): 915 mm. Height in mm (±5 mm): 2440 mm. Paint: Powder coated with Lead Free Paint. WARANTEE PERIOD IN NUMBER OF YEARS: 1 year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFM item56 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

57 A - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item57 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

58 Fabric Sofa for 3 people Sofa---(Providing, fitting & fixing of "3 Seater Sofa" Overall Size :Width : 181m Depth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item58 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

59 Desk with Return Desk & Storage, size: 1500 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Executive Desk with Return Desk" Unitized desk series is a minimal but comprehensive manager desk range designed for a variety of applications and layouts. The range has 5ft and 6ft wide L-shaped manger tables with pedestals. Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members: Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table. Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Size: 1500 (W) x 750 (D) x 750 (H) mm.(±10) & ERU: 900 (W) x 450 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item59 1 Nos 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

60 Mid Size L shape Desk, size: 16500 (W) x 700 (D) x 743 (H) mm.---(Providing, fitting & fixing of "Executive Desk with Return Desk" Understructure: The understructure is in prelam panels, made with PLT boards.2Drawer and 3Drawer storage units with different combinations to support Tops, made with 18mmPLT boards of different colours.Modesty and back panels, made with 18mm PLT boards.The Pedestals/Storages are fitted with necessary Locks.PLT Board Tops (Straight Edges):Tops for Junior1, Junior2, and Middle desk with ERU are of 18mm thickness.Made of 18mm thick PLT board with 2mm Edge banding.Wenge and Savannah Maple PLT board used for making Tops. Size: (Main Desk) 1650 (W) x 700 (D) x 743 (H) mm. (ERU): 1000 (W) x 450 (D) x 743 (H) mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item60 6 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

61 Back side storage, size: 1200 (W) x 450 (D) x 1192.5 (H) mm.---(Providing, fitting & fixing of "Back Unit" item61 2 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

62 Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel – 0.8 mm Thick.Sliding Door Arrangement:Full height Sliding Door with top hanging arrangement to prevent derailment.Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise.Locking & handle :Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking.Plastic flush & recessed handle.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg.4 Nos. of Adjustable Half Shelf.Top option:1 mm for Metal Top.Accessory:Craddle with pipes for hanging Godrej Instadex files.Leveler:Screw type leveler with hex plastic base (add in unit height min.8 mm & additional 5 mm max for adjustment).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Size: 1192.5 (W) x 1200 (D) x 450 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item62 6 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

63 Modular Confernce Table for 31 Str., size: 10973 (W) x 1800 (D) x 750 (H) mm.---(Providing, fitting & fixing of "31 Str. Conference Table" Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item63 3 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

64 Attendent Bed---(Providing, fitting & fixing of "Metal Attendent Bed" Base frame: MS ERW Tube. Section: RECT. 20 X 40mm. Thickness: 1.6 mm. Legs: MS ERW Tube. Section: SQUARE30 x 30mm. Thickness: 1.6 mm. Lead Screw with fixed handle: MS threads with Black Oxide Coating. Thread rolled MS lead screw with EN1A Nut. MS handle with chrome finish integrated with the lead screw. Leg elevation ratchet: MS powdercoated. Section: Dia 10mm. Lying surface frame: MS ERW tube. Section: Dia. 25.4 mm. Thickness: 1.2 mm. Lying Surfaces: MS sheet. Thickness: 1 mm. Easy Cleaning for maintaining hygiene. Head Board & Leg Board: MS ERW tube. Section: Dia.25.4 mm. Thickness: 1.2 mm. Headboard with Horizontal Tubes. Castors: Plastic polymer. Thickness: Wheel Dia125mm. Single wheel diagonal locking castors. Maximum safe working load: 155 kg. Maximum Patient load: 120 kg. Backrest Angle: 65°+/-5°. Knee Rest Angle: 30°+/-5°. Mattress: MATTRESS with ridges on foam to get better adherence to lying surface. Overall Sizes: (L)1940 mm X ( W)835 mm X (H) 100 mm (±10) for Plain Matress. Foam: PU foam slab stock. Thickness: 100MM. Slab stock foam with density 40±2 kg per cu.mtr with ridges for easy bending. Upholstery: HELIUM HEAVY A/F F/R SM. Thickness: 350GSM 0.45THK. WITH FIRE RETARDENT AND ANTIMICROBIAL PROPERTIES. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certifi item64 14 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

65 cate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item65 1 Hour 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

66 Doube Glass Centre Table---(Providing, fitting & fixing of "Centre Table" Table Top Material Type: Glass. Table Top Edges: Straight. Length of Table Top (Tolerance ±50 mm): 900 mm. Depth of Table Top (Tolerance ±20 mm): 600 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: MDF Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. Availability of Pedestal / Storage Unit: Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item66 1 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

67 Medicine Cupboard---(Providing, fitting & fixing of "Medicine Cupboard" Overall depth range (mm): 400 mm (+/- 2.5%). Overall Width range (mm): 400 mm (+/- 2.5%). Overall Height range (mm): 820 mm (+/- 2.5%). Painting: Powder Coating. Type of slide of drawer: Fitted With Telescopic Channel. Material of Enclosure of bedside locker: Mild steel. Material of cabinet and Drawer: Mild steel. Locking system for cabinet and drawer: Yes. Number of Shutters: 1. Finish: Power Coated. Frame Tube Material: MILD STEEL. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item67 1 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

68 Wooden Centre Table with inbuild storage, size: 1000 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of "Centre Table" Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Table Top Edges: Straight. Length of Table Top (Tolerance ±50 mm): 1200 mm. Depth of Table Top (Tolerance ±20 mm): 600 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Gable. Material of Table Understructure: Particle Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. Availability of modesty panel: Yes. Availability of Pedestal / Storage Unit: Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item68 10 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

69 Compact Office Table with storage, size: 1350 (W) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Office Table" Worksurface:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998with 0.4 mm PVC membrane pressed on to top.Gromet provided on work surface for wire management.Modesty Panel:Made of 25 thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understructure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Hinge door storage:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Handle is provided for ease of opening.Storage is provided with cam lock for security. Size: 1350 (W) x 600 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item69 3 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

70 Judge Table, size: 1650 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of "Judge Table" Worksurface:Made of 25 mm thick MDF - one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Softclosing access flap with in-build power box are provided on work surface for wire management.Modesty Panel:Made of 25 mm thick MDF-one side pre-laminate b item70 122 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

71 oard confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Drewer fronts made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILEtype which uses powder coated 400 mm long metal panel drawer slides.Drawer extension is 325 mm.Drawers have a soft closing & anti slam mechanism.Handles are provied for ease of opening.Pedestal is provided with lock for security. Size: 1650 (W) x 750 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item71 4 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

72 Squre Corner Table---(Providing, fitting & fixing of "Corner Table" Overall Size : Width : 60cm Depth : 60cm Height : 45cm. 1. Understructure: Legs, top wooden frame & bottom tie members are made out of first quality rubber wood without knots & defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. 2. Top: 8mm thick toughened glass. 3. Construction: Knock-down assembly. 4. Finish: Bloom_coffee table is in two colour finish option - ÿ Option - 1 : Natural finish ÿ Option - 2 : Walnut finish Wooden members are PU painted with hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having sand blasted floral pattern on bottom surface. 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush etc. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item72 2 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

73 Tublular Cantilive CHAIR with arm---(Providing, fitting & fixing of "PUBLIC CHAIR" The seat and back are made from chemically treated and seasoned wood,upholstered with plywood, black leather-cloth, and U-foam.BACK SIZE:46.0cm (W) x 27.0cm (H).(±10) SEAT SIZE:46.0cm (W) x 40.0cm (D).(±10) The armrest tube is made of M.S. E.R.W. tube dia. 2.54cm. (1”) x 16BG thick and powder coated.The armrest is gas-assisted injection moulded from black Polypropylene.The understructure assembly is a cantilever type frame made of dia.2.54cm. (1”) x 14BG. thick M.S. E.R.W. tube and powder coated. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item73 1 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

74 Corner Table with cruve, size: 600 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of "Corner Table" MATERIALS & SIZE : Material: Plywood+ MDF + Solid wood legs Color : Dark Wenge Top Material: Plywood+ MDF Frame Material: Plywood+ MDF Leg Material: Solid wood ( Rubber wood) Shoe material: Polypropylene Mode of Supply Storage: NA Top Dimension: 600X600X18 Height: 455 Thickness of frame: 18 Thickness of understructure Legs: 68 (+/- 5) Weight / unit (KG): 14 KG (+/- 4) Overall LxWxH: 1200 X 600 X 455. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Adva item74 144 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

75 ntage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item75 34 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

76 Single Bed with Mattress---(Providing, fitting & fixing of "Single Bed with Mattress" Dimensions W x H x D (cm)- 100 x 95.6 x 206 (±10) Seating Height (cm)- 43 Finish Color- Black Primary Material- Metal Warranty- 1 Year Warranty Storage Included- No Storage Mechanism- No Storage Delivery Condition- Knock Down Headboard Included- Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item76 1 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

77 Wheel Chair---(Providing, fitting & fixing of "Wheel Chair" Description: Chrome finished wheelchair foldable type with cushion type seat and flexible back. wheel type is Mag wheels. Overall Sizes: (L) 790mm x (W) 600mm x (H) 870 mm. (±10) Frame structure: Foldable frame structure is made of Ø22x1.2mm steel tube,A3 carbon steel with chrome finish.Cross bar made of Ø25.4x1.2mm A3 carbon steel. Rear wheel: 24 inch Solid Mag wheels with alloy in the rim and solid rubber lining for the wheels for strong and sturdy performance.It is made of PA polymer and outer with solid rubber. Hand rim: Intgrated handrim provide to drive the wheel chair.It is made of Ø16x1.2mm A3 carbon steel with chrome finish. Front wheel: 8 inch HUB made of PA polymer and outer with Solid rubber. Arm rest: PU molded arm rests for better arm support.Holder base made of ABS polymer. Calf rest: Leatherite strap for calf rest. Seat: Cushion leatherite seat. Foot rest: Adjustable alluminum(ZL104)die cast foot rest with up down and swiwel type adjustment. Push handle: Handles provided with Moulded PVC grip to push the wheelchair. Brakes: Hand brakes provided to lock the wheelchair at desired location. Foot Press: Provision of extended base with Moulded Plastic (PE PLASTIC) grip to lift the wheelchair front to overcome obstructions while maneuvering. Finish: Anti rust chrome finish. Maximum Patient load: 100 kg. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item77 2 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

78 Premium Suite with Return Unit, size: MD 3000 (w) x 1050 (D) x 740 (H) mm. ERU 1500 (W) x 600 (D) x 610 (H) mm.---(Providing, fitting & fixing of "Premium Suite with Return Unit," MAIN WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. LEATHER PAD: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. DRAWER UNIT: Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. OPEN STORAGE UNIT: Top panel and open storage unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. MODESTY: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. Also lock is provided on side panel for security. ACCESS FLAP WITH POWER BOX: Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. HIDDEN WIRELESS MOBILE CHARGER: It will only be available in 3000mm main table. It is fitted below leather pad. ERU: TOP PANEL: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. SLIDING SHUTTER: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Door is provided with soft closing & anti slam mechanism. Handle is also provided for ease of opening. Storage is secured with lock. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. DRAWERS: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawers have soft closing channels for smooth opening and closing. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Ma item78 4 Per trip 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

79 nufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item79 81 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

80 Multi Cabinet unt for Back side, size: 2400 (W) x 470 (D) x 1950 (H) mm.---(Providing, fitting & fixing of "Back Unit" CONSTRUCTION AND MATERIAL: Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit. Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). VENEER DOOR: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage is secured with 3 way cam lock. GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm clear toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security. Size: 2400 (W) X 1950 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item80 2 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

81 Thick layed 1 Seater Sofa---(Providing, fitting & fixing of "1 Seater Sofa" Net Weight (kg)- 44 Dimensions W x H x D (cm)- 110 x 89 x 93.5 Finish Color- Textured Bond White Indigo Seat Height (cm)- 47.5 Primary Material- Pinewood Delivery Condition- Knock Down Upholstery Material- Fabric Warranty- 1 Year Warranty. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item81 2 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

82 multi layed 3 Seater Sofa---(Providing, fitting & fixing of "3 Seater Sofa" Dimensions W x H x D (cm)- 210 x 89 x 93.5 Finish Color- Textured Bond White Indigo Net Weight (kg)- 62 Seat Height (cm)- 47.5 Style- Contemporary & Modern Primary Material- Pinewood Delivery Condition- Knock Down Upholstery Material- Fabric Warranty- 1 Year Warranty. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item82 5 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

83 Leather High Back Chair---(Providing, fitting & fixing of "Main High Back Chair" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with pure leather and moulded high resilience (HR) polyurethane foam of density 45± 2 kg/m³,and hardness load 16±2 kgf as per IS:7888 for 25% compression.Seat Size: 47.6 cm.(W) x 49.2 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W. round tube of size 1.9±0.03 cm x 0.16 ±0.0128 cm.It upholstered with pure leather.High Back size : 47.5 cm. (W) x 77 cm. (D).(±10) The armrest top is moulded from polyurethane (PU) upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01 cm thk M.S.E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5 ± 0.5 cm in 5 steps.The adjustable tilting mechanism is designed with the following features:360° revolvng type.Front-pivot for till with feet resting on ground and continuous lumbar support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position Tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1:2.The mechanism housing is made up of HPDC Aluminium black powder coated.Seat depth adjustment is integrated in the seat through a sliding mechanism.Seat depth adjustment range is of 6.0±0.5 cm.Back frame is connected to the UP/DN mechanism housed in plastic T spine.It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors.The pedestal is 65.0 ± 0.5 cm.pitch-center dia.5 nos. twin wheel castors are injection moulded in plastic having 6.0 ± 0.1 cm wheel diameter and assembled to pedestal. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is manda item83 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

84 tory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item84 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

85 Judge Chair---(Providing, fitting & fixing of "Judge Chair" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.High Bck Size: 47.7 cm (W) x 76.4 cm (D).(±10) The armrest top is moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01 cm thk M.S. E.R.W. tube having chrome plated finish.The armrest height adjustable up to 6.5 ± 0.5 cm in 5 steps.The adjustable tilting mechanism is designed with the following features:360° revolving type.Front-pivot for tilt with feet resting on ground and cntinuous lumber support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1:2.The mechanism housing is made up of HPDC aluminium black powder coated.Seat depth adjustment is integrated in the seat through a sliding mechanism.Seat depth adjustment range is of 6.0±0.5 cm.Back frame is connected to the UP/DN mechanism housed in plastic T spine.It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors.The pedestal is 65.0 ± 0.5 cm.pitch-center dia.5 nos. twin wheel castors are injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.) item85 2 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

86 Mid Back cantileaver Chair---(Providing, fitting & fixing of "Visitor Chair" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.Mid Bck Size: 47.7 cm (W) x 60.1 cm (D).(±10) The tubular frame is cantilever type & made of Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm thk S.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item86 198 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

87 Round edge squre Table, size: 900 (W) x 900 (D) x 740 (H) mm.---(Providing, fitting & fixing of "Small Meeting Table" Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round). Side Panel: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructure: The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel: The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item87 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

88 Single Conference Table---(Providing, fitting & fixing of "Conference Table" Work top: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Man item88 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

89 agement: A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). Size: 3600 (W) x 1500 (D) x 740 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item89 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

90 Premium Leather High Back Chair---(Providing, fitting & fixing of "Executive High Back Chair" SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W). (±10) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D). (±10) ARMRESTS: The armrest having four range of adjustment - Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range). Arm top swivel adjustment- 2 position, 12°±2° swivel inside. Arm top width adjustment - Any position (2.0±0.5cm range each arm top). Arm top To - Fro Adjustment- any position (4.0±0.5cm range). Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.) item90 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

91 Ovel shape two layer side table---(Providing, fitting & fixing of "Visitor circular side table" Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Table Top Edges: Round. Length of Table Top (Tolerance ±50 mm): 600 mm. Material Type of Table Understructure: Metal Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: Mild Steel. Table Understructure Metal Legs Cross Section (Approx): 40 x 40 mm. Thickness of Metal Legs Cross Section: 1.0 mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item91 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

92 non revolving movable Chair With Arm---(Providing, fitting & fixing of "Chair With Arm" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Poly Amide. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item92 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

93 Desklet Chair---(Providing, fitting & fixing of "Desklet Chair" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10 item93 4 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

94 ) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desklet support frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and welded to main frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. QUARTER DESKLET: The 'L' shape desklet is made of 1.8 ±0.05cm. thk. pre-laminated particleboard with 0.2 ± 0.05cm. thk. injection moulded PolyPropylene all around. Desklet has Front and back adjustment of 8.0 cm ± 0.5 cm. OUTER DIMENSION: 31.5±0.1cm. (W) X 47.0±0.1cm. (D). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item94 4 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

95 Fome sofa 1 str.---(Providing, fitting & fixing of "1 Seater sofa" Total Number of Seats in the Sofa Set: 1. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 20. Covering Material for Seat and Backrest: Leatherite. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 35. Type of Spring in the Base / Seating: Web suspension. Length of Single Seater Units in mm (±5 mm): 855. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 550 millimeter. Sofa Height (With Back Cushion) ±5 mm: 970 millimeter. Seat Cushion Length ±5 (mm): 545. Seat Cushion Width ±5 (mm): 530. Seat Cushion Thickness ±3 (mm): 150. Backrest Cushion Length ±5 (mm): 530. Backrest Cushion Width ±5 (mm): 425. Warranty: 1 - Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item95 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

96 Foam Sofa 3 Str.---(Providing, fitting & fixing of "3 Seater sofa" Total Number of Seats in the Sofa Set: 3. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 20. Covering Material for Seat and Backrest: Leatherite. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 35. Type of Spring in the Base / Seating: Web suspension. Length of Three Seater Units in mm (±10 mm): 1710. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 550 millimeter. Sofa Height (With Back Cushion) ±5 mm: 970 millimeter. Seat Cushion Length ±5 (mm): 1495. Seat Cushion Width ±5 (mm): 530. Seat Cushion Thickness ±3 (mm): 150. Backrest Cushion Length ±5 (mm): 1630. Backrest Cushion Width ±5 (mm): 425. Warranty: 1 - Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) item96 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

97 SS Table top with SS Understorage with accessories---(Providing, fitting & fixing of "SS Table top with SS Understorage with accessories" Cabinet Material: Combination of 0.5mm (Body panels) and 1.2mm thick (Horizontal stiffener & leg channels) Galvanized sheet as per IS277. Unit Construction: Floor, Tall and Wall units will be made using sheet metal panels connected with fasteners. Metal Shutters: Powder coated Steel shutters made up with inner and outer panels using 0.6mm thick Galvanized steel corner formed. Precoated Steel shutter made with outer precoated panel made of 0.75 Galvanized sheet and powder coated inner panel 0.6mm thick Galvanized steel corner formed. 4mm frosted glass in metal corner formed shutter. Wooden shutters: 18mm thk shutters in following finishes. Marine ply with laminate. Marin ply with laminate with aluminum profile handle. Marine ply with laminate with Rim handles/ Chisel handles/ Mystic handles. Marine ply + PU painted. Marine ply + PU painted with aluminum profile handle. Marine ply + PU painted with Rim handles/ Chisel handles/ Mystic handles. Lac MDF shutter board from 5K make. Lac MDF shutter with aluminum profile handle board from 5K make. Lac MDF shutter with Rim handles/ Chisel handles / Mystic handles. Acrylic on birch ply shutter. Acrylic on birch ply shutter with aluminium profile handle. Acrylic on birch ply shutter with Rim handles/ Chisel handles/ Mystic handles. Prelam BWR shutter. Prelam BWR shutter with aluminium profile handle. MDF+ back painted glass shutter with aluminum profile handle. Prelam BWR with Rim handles/ Chisel handles / Mystic handles. Wide aluminum shutter with back painted glass. Finish on metal surface: Epoxy polyester powder coating with dry film thickness of 50 microns (±10). Wire baskets: Stalwart basket Made of 304 grade Stainless steel wires with Ni Cr plating and Hettich double extension slides. Hettich kits for wire basket and Quadro slides. Serene Undermount soft closing slides with 304 grade Stainless steel wires with Ni Cr plating. Drawer system: Tranquil drawer M-type and F-type. Shelves: 0.5thk Galvanized steel shelves in item97 1 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

98 8G)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Old Agartala RD Block area item98 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

99 8H)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Belbari RD Block area item99 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

100 8I)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----MohanpurRD Block area item100 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

101 8J)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Bamutia RD Block area item101 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

102 8K)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Dukli RD Block area item102 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

103 8L)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Hezamara RD Block area item103 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

104 8M)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Lefunga RD Block area item104 150 Per day (working period- 8 hours per day) 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

105 Sand item105 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

106 Sand item106 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

107 Sand item107 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

108 Sand item108 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

109 Sand item109 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

110 Sand item110 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

111 Sand item111 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

112 Sand item112 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

113 Sand item113 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

114 Sand item114 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

115 Sand item115 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

116 Sand item116 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

117 Sand item117 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

118 Sand item118 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

119 Sand item119 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

120 Sand item120 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

121 Sand item121 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

122 Sand item122 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

123 Sand item123 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

124 Sand item124 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

125 Sand item125 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

126 Sand item126 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

127 Sand item127 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

128 Sand item128 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

129 Sand item129 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

130 Sand item130 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

131 Sand item131 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

132 Sand item132 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

133 Sand item133 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

134 Sand item134 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

135 Sand item135 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

136 Sand item136 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

137 Sand item137 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

138 Sand item138 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

139 Sand item139 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

140 Sand item140 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

141 Sand item141 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

142 Sand item142 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

143 Sand item143 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

144 Sand item144 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

145 Sand item145 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

146 Sand item146 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

147 Sand item147 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

148 Sand item148 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

149 Sand item149 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

150 Sand item150 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

151 Sand item151 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

152 Sand item152 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

153 Sand item153 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

154 Sand item154 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

155 Sand item155 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

156 Sand item156 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

157 Sand item157 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

158 Sand item158 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

159 Sand item159 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

160 Sand item160 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

161 Sand item161 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

162 Sand item162 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

163 Sand item163 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

164 Sand item164 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

165 Sand item165 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

166 Sand item166 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

167 Sand item167 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

168 Sand item168 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

169 Sand item169 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

170 Sand item170 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

171 Sand item171 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

172 Sand item172 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

173 Sand item173 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

174 Sand item174 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

175 Sand item175 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

176 Sand item176 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

177 Sand item177 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

178 Sand item178 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

179 Sand item179 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

180 Sand item180 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

181 Sand item181 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

182 Sand item182 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

183 Sand item183 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

184 Sand item184 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

185 Sand item185 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

186 Sand item186 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

187 Sand item187 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

188 Sand item188 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

189 Sand item189 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

190 Sand item190 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

191 Sand item191 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

192 Sand item192 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

193 Sand item193 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

194 Sand item194 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

195 Sand item195 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

196 Sand item196 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

197 Sand item197 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

198 Sand item198 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

199 Sand item199 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

200 Sand item200 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

201 Sand item201 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

202 Sand item202 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

203 Sand item203 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

204 Sand item204 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

205 Sand item205 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

206 Sand item206 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

207 Sand item207 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

208 Sand item208 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

209 Sand item209 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

210 Sand item210 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

211 Sand item211 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

212 Sand item212 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

213 Sand item213 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

214 Sand item214 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

215 Sand item215 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

216 Sand item216 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

217 Sand item217 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

218 Sand item218 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

219 Sand item219 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

220 Sand item220 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

221 Sand item221 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

222 Sand item222 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

223 Sand item223 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

224 Sand item224 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

225 Sand item225 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

226 Sand item226 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

227 Sand item227 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

228 Sand item228 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

229 Sand item229 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

230 Sand item230 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

231 Sand item231 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

232 Sand item232 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

233 Sand item233 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

234 Sand item234 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

235 Sand item235 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

236 Sand item236 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

237 Sand item237 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

238 Sand item238 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

239 Sand item239 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

240 Sand item240 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

241 Sand item241 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

242 Sand item242 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

243 Sand item243 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

244 Sand item244 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

245 Sand item245 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

246 Sand item246 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

247 Sand item247 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

248 Sand item248 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

249 Sand item249 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

250 Sand item250 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

251 Sand item251 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

252 Sand item252 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

253 Sand item253 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

254 Sand item254 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

255 Sand item255 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

256 Sand item256 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

257 Sand item257 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

258 Sand item258 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

259 Sand item259 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

260 Sand item260 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

261 Sand item261 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

262 Sand item262 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

263 Sand item263 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

264 Sand item264 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

265 Sand item265 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

266 Sand item266 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

267 Sand item267 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

268 Sand item268 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

269 Sand item269 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

270 Sand item270 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

271 Sand item271 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

272 Sand item272 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

273 Sand item273 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

274 Sand item274 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

275 Sand item275 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

276 Sand item276 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

277 Sand item277 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

278 Sand item278 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

279 Sand item279 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

280 Sand item280 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

281 Sand item281 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

282 Sand item282 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

283 Sand item283 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

284 Sand item284 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

285 Sand item285 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

286 Sand item286 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

287 Sand item287 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

288 Sand item288 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

289 Sand item289 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

290 Sand item290 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

291 Sand item291 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

292 Sand item292 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

293 Sand item293 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

294 Sand item294 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

295 Sand item295 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

296 Sand item296 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

297 Sand item297 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

298 Sand item298 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

299 Sand item299 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

300 Sand item300 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

301 Sand item301 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

302 Sand item302 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

303 Sand item303 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

304 Sand item304 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

305 Sand item305 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

306 Sand item306 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

307 Sand item307 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

308 Sand item308 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

309 Sand item309 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

310 Sand item310 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

311 Sand item311 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

312 Sand item312 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

313 Sand item313 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

314 Sand item314 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

315 Sand item315 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

316 Sand item316 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

317 Sand item317 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

318 Sand item318 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

319 Sand item319 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

320 Sand item320 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

321 Sand item321 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

322 Sand item322 50 mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

323 Sand item323 50 mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

324 Sand item324 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

325 Sand item325 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

326 Sand item326 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

327 Sand item327 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

328 Sand item328 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

329 Sand item329 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

330 Sand item330 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

331 Sand item331 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

332 Sand item332 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

333 Sand item333 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

334 Sand item334 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

335 Sand item335 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

336 Sand item336 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

337 Sand item337 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

338 Sand item338 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

339 Sand item339 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

340 Sand item340 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

341 Sand item341 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

342 Sand item342 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

343 Sand item343 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

344 Sand item344 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

345 Sand item345 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

346 Sand item346 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

347 Sand item347 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

348 Sand item348 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

349 Sand item349 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

350 Sand item350 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

351 Sand item351 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

352 Sand item352 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

353 Sand item353 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

354 Sand item354 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

355 Sand item355 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

356 Sand item356 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

357 Sand item357 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

358 Sand item358 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

359 Sand item359 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

360 Sand item360 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

361 Sand item361 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

362 Sand item362 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

363 Sand item363 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

364 Sand item364 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

365 Sand item365 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

366 Sand item366 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

367 Sand item367 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

368 Sand item368 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

369 Sand item369 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

370 Sand item370 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

371 Sand item371 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

372 Sand item372 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

373 Sand item373 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

374 Sand item374 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

375 Sand item375 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

376 Sand item376 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

377 Sand item377 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

378 Sand item378 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

379 Sand item379 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

380 Sand item380 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

381 Sand item381 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

382 Sand item382 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

383 Sand item383 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

384 Sand item384 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

385 Sand item385 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

386 Sand item386 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

387 Sand item387 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

388 Sand item388 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

389 Sand item389 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

390 Sand item390 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

391 Sand item391 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

392 Sand item392 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

393 Sand item393 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

394 Sand item394 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

395 Sand item395 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

396 Sand item396 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

397 Sand item397 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

398 Sand item398 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

399 Sand item399 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

400 Sand item400 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

401 Sand item401 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

402 Sand item402 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

403 Sand item403 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

404 Sand item404 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

405 Sand item405 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

406 Sand item406 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

407 Sand item407 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

408 Sand item408 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

409 Sand item409 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

410 Sand item410 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

411 Sand item411 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

412 Sand item412 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

413 Sand item413 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

414 Sand item414 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

415 Sand item415 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

416 Sand item416 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

417 Sand item417 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

418 Sand item418 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

419 Sand item419 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

420 Sand item420 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

421 Sand item421 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

422 Sand item422 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

423 Sand item423 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

424 Sand item424 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

425 Sand item425 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

426 Sand item426 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

427 Sand item427 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

428 Sand item428 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

429 Sand item429 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

430 Sand item430 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

431 Sand item431 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

432 Sand item432 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

433 Sand item433 50 mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

434 Sand item434 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

435 Sand item435 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

436 Sand item436 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

437 Sand item437 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

438 Sand item438 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

439 Sand item439 50 Mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

440 Sand item440 50 mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

441 Sand item441 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

442 Sand item442 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

443 Sand item443 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

444 Sand item444 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

445 Sand item445 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

446 Sand item446 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

447 Sand item447 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

448 Sand item448 50 kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

449 Sand item449 50 100 gm 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

450 Sand item450 50 100 gm 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

451 Sand item451 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

452 Sand item452 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

453 Sand item453 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

454 Sand item454 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

455 Sand item455 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

456 Sand item456 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

457 Sand item457 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

458 Sand item458 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

459 Sand item459 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

460 Sand item460 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

461 Sand item461 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

462 Sand item462 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

463 Sand item463 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

464 Sand item464 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

465 Sand item465 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

466 Sand item466 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

467 Sand item467 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

468 Sand item468 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

469 Sand item469 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

470 Sand item470 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

471 Sand item471 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

472 Sand item472 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

473 Sand item473 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

474 Sand item474 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

475 Sand item475 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

476 Sand item476 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

477 Sand item477 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

478 Sand item478 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

479 Sand item479 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

480 Sand item480 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

481 Sand item481 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

482 Sand item482 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

483 Sand item483 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

484 Sand item484 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

485 Sand item485 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

486 Sand item486 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

487 Sand item487 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

488 Sand item488 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

489 Sand item489 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

490 Sand item490 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

491 Sand item491 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

492 Sand item492 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

493 Sand item493 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

494 Sand item494 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

495 Sand item495 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

496 Sand item496 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

497 Sand item497 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

498 Sand item498 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

499 Sand item499 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

500 Sand item500 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

501 Sand item501 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

502 Sand item502 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

503 Sand item503 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

504 Sand item504 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

505 Sand item505 50 Pair 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

506 Sand item506 50 pair 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

507 Sand item507 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

508 Sand item508 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

509 Sand item509 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

510 Sand item510 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

511 Sand item511 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

512 Sand item512 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

513 Sand item513 50 Lt 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

514 Sand item514 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

515 Sand item515 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

516 Sand item516 50 Kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

517 Sand item517 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

518 Sand item518 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

519 Sand item519 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

520 Sand item520 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

521 Sand item521 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

522 Sand item522 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

523 Sand item523 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

524 Sand item524 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

525 Sand item525 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

526 Sand item526 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

527 Sand item527 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

528 Sand item528 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

529 Sand item529 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

530 Sand item530 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

531 Sand item531 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

532 Sand item532 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

533 Sand item533 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

534 Sand item534 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

535 Sand item535 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

536 Sand item536 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

537 Sand item537 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

538 Sand item538 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

539 Sand item539 50 Kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

540 Sand item540 50 kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

541 Sand item541 50 Kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

542 Sand item542 50 kg 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

543 Sand item543 50 mtr 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

544 Sand item544 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

545 Sand item545 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

546 Sand item546 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

547 Sand item547 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

548 Sand item548 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

549 Sand item549 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

550 Sand item550 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

551 Sand item551 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

552 Sand item552 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

553 Sand item553 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

554 Sand item554 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

555 Sand item555 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

556 Sand item556 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

557 Sand item557 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

558 Sand item558 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

559 Sand item559 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

560 Sand item560 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

561 Sand item561 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

562 Sand item562 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

563 Sand item563 50 No 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

564 Sand item564 50 Pair 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select %

Quoted Rate in Words