Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.6 L+₹47,528 (3.63%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹9.9 L
EMD Value
₹20,000
Closing Date
12 May 2022, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commissioner MC Palampur
Municipal Corporation Palampur
C/O Park/ recreation spot at w.no 6 Palampur
2022_UDDHP_60096_1
1MC-Palam(1)2022-(6)
Open Tender
Civil Works
Item Rate
90 days
Palampur
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
Commissioner
₹20,000
29 Dec 2022
30 Apr 2022
12 May 2022
30 Apr 2022
12 May 2022
30 Apr 2022
90 days
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size). in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 Granular material in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand). in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Stone soling property hand-packed filling interstices with spalls and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc.100 mm spread thickness (finished work including materials and labour). in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works. in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Providing and Fixing cast iron Ornamental grill ornamental grill or equavalnt 0.58 mtr hieght welded with 35x35x4mm angle iron in bottom through out length and hold fast as per approved desing and pattern and as per direcion of Engineer in Charge with in all leads and lifts and other incidenatal.
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture in all leads & lifts, carriage of material by manual, mechanical transport, and mules & other incidential complete in all respects as per entire satisfaction of engineer-in- charge.
kamakshi Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .