Const. of all Weather Swimming Pool in Sports Complex at Ambala Cantt. in Ambala Distt. (Pdg. Solar water Heating system).

Amount

NS-2 SITC of Make up water tank PVC type ISI marked of 500 liters capacity to be provided with soft water provision & to refill at regular intervals for PHE primary circuit. MS Stand as per requirement. Also to provide Heavy Duty Float Valve, NRV & Ball Valves of 15mm NB with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

NS-3 Heat Transfer PHE SITC of Plate type Heat Exchanger of SS-316 plates of capacity 2,50,000 Kcal/Hr (1W +1 Stand By ) for heat transfer between solar collectors & pool. with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make: Tech Trans, GEA, Tranter

NS-4 Circulation Pumps Design & SITC of Recirculation centrifugal pumps (to be located as per site conditions) -1 Set for Primary side (1W+1S) of suitable HP Rating reqd. & IE-3 class motor with brass impeller, SS-304 shaft & CI casing (or as per manufacturer's standards meeting our technical parameters). Specs: 25000 LPH @20 m Head. with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make:- Kirloskar/ Grundfos / Wilo

NS-5 Design & SITC of Recirculation centrifugal POOL pumps (to be located at terrace level/or as per site conditions) -1 Set for Secondary (1W+1S) of suitable HP Rating reqd. & Pump casing, impeller & Adapter of Glass Filled Polypropelene, Mechanical Seal - Carbon Ceramic, Motor Body - Aluminium & SS-304 shaft (or as per manufacturer's standards meeting our technical parameters). Pump has IP55 Rating, Specs: 25000@10 m Head with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make:- Kirloskar/Grundfos/Wilo

NS-6 System Piping Designing, SITC of B- Class Insulated GI System Piping amongst solar collectorss, between Solar Collectors & PHE, of dia 25/32 mm as reqd. & duly inulated with Nitrile Sleeve Insulation 9/13mm thick & clad with Poly shield type Fiber Cloth 2" tape helically wound over the nitrile sleeve & finished with Hardener. System piping shall be designed with reqd Z & Parallel Combinations such that all the collectors with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make:- Unik, Supreme, TATA 6.1 32mm NB

NS-7 SITC of GI Piping accessories like Ball Valves, NRVs with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make:- Zoloto, Danfoss, Honeywell 7.1 Ball Valves 32mm

7.2 Ball Valves 25mm

7.3 Ball Valves 15mm

7.4 NRV 32mm

7.5 NRV 25mm

7.6 NRV 15mm

NS-8 SITC of Air Relase Valve / Auto Vent 15mm MT with Nickle Plated Forged Brass Body, Working Temp 90 deg C, Working Pressure 6 Bar & Test Pressure 16Bar, with PP Resin Plastc Float & Lever as per ASTM C36600 & Spring as per AISI 302 Standards with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (Make - RBM Italy, Danfoss, OR (Italy)

NS-9 SITC of Heavy Duty Float Valve ISI marked with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (for Make Up Tank)

NS-10 SITC of Mercury in Steel Dial Temperature Gauge (H Guru) with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make - H.Guru, Fiebig, Emerald

NS-11 SITC of Mercury in Steel Dial Pressure Gauge with Brass Check Valve (H Guru) with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make - H.Guru, Fiebig, Emerald

NS-12 Supply ,Installation, testing and commissioning of Y-Strainer of approved/ISI marked following sizes complete with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works flanges, nuts/bolts, gasket, insulation support etc. 12.1 50 mm dia

12.2 32 mm dia

12.3 25 mm dia

NS-13 UPVC System Piping for Secondry Side between PHE & Pool, of 50 mm dia as reqd. & duly inulated with Nitrile Sleeve Insulation 19mm thick & clad with Poly shield type Fiber Cloth 2" tape helically wound over the nitrile sleeve & finished with Hardener with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make of insulation Armaflex, Parmountl, KFlex 13.1 50mm dia

NS-14 SITC of GI Piping accessories with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. like Ball Valves, NRVs, Air Relase Valves (Auto Vents) etc. Make:- Zoloto, Danfoss, Honeywell 14.1 Ball Valves 50mm

14.2 NRV 50mm

NS-16 Cables & Accessories. Design, Supply, Installation, Testing, Commissioning of power cables/control cables, cable trays, glands with required accessories, etc. from all equipment, pumps to control panel complete as specified and shown in drawings with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make: Havells, Polycab, Plaza 16.1 Copper Cable 2.5mm x 4C

16.2 Cable Tray 150 x 40

NS-17 THERMAL POOL COVER Providing Thermal Pool Cover ISI marked/approved make of proper thermal properties to be available for non-usage hours. This is an integral part of the pool heating system without which thermal losses will be uncontrollable. The Thermal blanket or Pool Cover shall have the following properties: Stitching on sides for aberration protection (border) with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. 17.1 500+ micron LDPE Sheet with Air Bubbles (Round shaped) or Plastic expended sheet 6mm thick 17.2 UV Resistant 17.3 Resistant to Pool Purification Chemicals 17.4 Floating type 17.5 Natural Sky Blue Colour 17.6 Area (50m x 25m + overlap on sides)

NS-18 THERMAL POOL COVER ROLLERS Providing ISI marked/approved make SS-304 Rollers for Rolling the Pool Cover with mechanical hand winding movement. Consists of a SS stand, Roller & Winding Lever with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

SUNSON ENERGY DEVICES (P) LIMITED

KOSOL ENERGIE PVT. LTD.