Construction of LIS to Village Pakhrair in GP Pakhrair in Tehsil Thunag Distt Mandi HP

Amount

Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 ( 1cement:4sand: 8graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:3:6 ( 1cement:3sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-

Foundation, footings base of columns and the like mass concrete.

Walls any thickness but not less than 0.1 mtr. thickness attached pillasters, buttresses plinth and string courses etc. from top of foundation level upto floor two level

Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in all leads and lifts.

Foundation footings, bases of columns and the and mass concrete.

Beam, cantilivers, girders and lintels side and soffits of beam haunches cantilivers girder bressumers and lintle not exceeding 1 mtr in depth in all leads and lift.

Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

Providing and laying tor steel reinforcement for RCC work including bending, binding and placing in position including cost of binding wire complete upto floor two level in all leads and lifts.

Fixing GI pipe of following diameter for inlet, outlet and over flow in all leads and lifts complete in all respect :-

100 mm dia meter for inlet, outlet and scour.

Providing and fixing C.I. sluice valve ( with hand wheel) as per IS: 780 class up to 300mm dia including brass spindle and as per IS 2906 PN 1 for diameter more than 300mm complete with bolts, nuts, rubber insertion etc., ( The tail piece if required shall be measured and paid for separately) with in all leads,lifts and to the entire satisfaction of engineer incharge.

80mm dia meter for inlet, outlet and scour.

100 mm dia meter for inlet, outlet and scour.

Bir Singh

BAL CHAND WALIA