Erection and maintenance of HT/LT line and transformer center on ARC basis for dismantling work of existing HT/LT network & concreting of pole under all sub-division under Valsad city division.

Annexure-A Schedule B

Erection and maintenance of HT/LT line and transformer centre on ARC basis for dismentaling work of existing

HT/LT network & concreting of pole under all sub-division under Valsad city division.

Rate for FY 2024-

Item Code Item Unit

CAPITAL WORK LABOUR RATES FOR FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF

CROSS ARMS , CLAMPS ANTI-CLIMBING DEVICES , DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST

OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIX ING OFCROSS ARMS , TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES , INSULATORS ETC.

2 9926000002 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OFCROSS

ARMS , TOP FITTING CLAMPS ANTI- CLIMBING DEVICES , DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL

POLE, FABRICATED MATERIALS USED ON THE POLEAND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/ 11/22KV OVERHEAD

LINES l.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH,

FIX ING CROSS ARMS , TOP FITTING CLAMPS .ANTI-CLIMBING

4 9926000004 DEVICES DANGER BOARD, INSULATORS ETC. COMPLETE AND No.

PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING , FIXING OF CHANNELS , SUPPORTING ANGLES

.CLAMPS , ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS .INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT

ERECTION OF DOUBLE POLE STRUCTURE OF

9 TO 11 METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIX ING OF CHANNELS , SUPPORTING

ANGLES , CLAMPS .ANTI-CLIMBING DEVICES DANGER BOARDS

INSULATORS ETC.COMPLETE & PAINTING OF POLES.FABRICATED

MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF

PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH , HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH.FIXING OF

CHANNELS SUPPORTING ANGLES , CLAMPS , ANTI- CLIMBING

7 9926000007 DEVICES , DANGER BOARDS , INSULATORS ,DOFUSES ETC. No.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH .HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, FIX ING

OFCHANNEL , SUPPORTING ANGLES , CLAMPS , ANTI-

8 9926000008 CLIMBING DEVICES , DANGER BOARDS , INSULATORS , ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH, HG FUSES, TRANSFORMERS , LIGHTENING ARRESTORS

DISTRIBUTION BOX . OF 8 METER,200KG PSC POLE METERS

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE , FIX

ING OF CHANNELS , SUPPORTING ANGLES .BRACINGS CROSS

ARMS CLAMPS , ANTICLIMBING DEVICES DANGER BOARDS

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USEDON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH .HG FUSES TRANSFORMERS , LIGHTENING ARRESTORS

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE , FIXINGOF CHANNELS

10 9926000010 SUPPORTING ANGLES , BRACING , CROSS ARMS .CLAMPS , No.

ANTICLIMBING DEVICES , DANGER

BOARDS .CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH

11 9926000011 STAY CLAMPS , STAY WIRE , ANCHOR ROD, TURN BUCKLE, No.

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS , ETC. INCLUDING COST OF

CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER STANDARD

SPECIFICATION.(cement Should be

grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL.SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/Cl PLATE TYPE EARTHING INCLUDINGCOST

OF COAL SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI

WIRE AS PER STANDARD

SPECIFICATION.(20kg solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS

BRASS NIPPLE, BRASS HOLDER TECK WOOD BUSH.REFLECTORS

FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@ ,55MM2 AAA CONDUCTOR for

ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR ONE COND

11/22KV & LT LINES INCLUDING FIX ING OF INSULATORS , BINDING PER KM

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC

2.5/4MM2 TWIN CORE CABLE FROM TERMINAL POLE TO METERING

18 9926000018 POINT INCLUDING FIXING OF METER WITH METER EARTHING No.

COMPLETE WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH

PVC 4MM2/ 10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIX ING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA

FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST

EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF

POLE.GUY , DOUBLE POLE STRUCTURE EARTHING WITH THE

APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING

25 9926000025 .HT LINE CROSSING AND TELEPHONE LINE CROSSING ETC.(PER No.

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS , LIGHTENING ARRESTOR , DISTRIBUTION

BOX . ON 8 METERS 200 KGAND PSC POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE , FIXING OF CHANNELS

26 9926000026 SUPPORTING ANGLES .BRACINGS CROSS ARMS CLAMPS , No.

ANTICLIMBING DEVICES DANGER BOARDS , CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH , HG FUSES,TRANSFORMERS , LIGHTENINGARRESTOR

DISTRIBUTION BOX . ON 9 to 11 METERS RSJ POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE , FIXING OF CHANNELS

27 9926000027 SUPPORTING ANGLES .BRACINGS CROSS ARMS CLAMPS , No.

ANTICLIMBING DEVICES DANGER BOARDS , CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIX ING OF CROSS ARMS , TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES , INSULATORS ETC.

28 9926000028 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING , FIXING OF CHANNELS , SUPPORTING ANGLES

.CLAMPS , ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS .INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT

STRINGING OF 100MM2 ACSR/ 100MM2 AAAC CONDUCTOR FOR

30 9926000030 11/22KV & LT LINES INCLUDING FIXING OFINSULATORS , BINDING

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES ONE COND

INCLUDING FIX ING OF INSULATORS , BINDING JUMPERING ETC. PER KM

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF

AB SWITCH , HG FUSES, TRANSFORMERS , LIGHTENING

ARRESTORS , DISTRIBUTION BOX . OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE

FIX ING OF CHANNELS , SUPPORTING ANGLES .BRACINGS CROSS

ARMS CLAMPS , ANTI-CLIMBING

DEVICES .DANGER BOARDS , CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

33 9926000033 FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

FABRICATION AT STORE

& STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION I

TENSION CLAMP, FIX ING OF CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIX ING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION I

39 9926000039 TENSION CLAMP, FIX ING OF CROSS ARM, BINDING TO PIN KM

INSULATOR .PREPARING SHACKLE POINT.JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION I

40 9926000040 TENSION CLAMP, FIX ING OF CROSS ARM, BINDING TO PIN KM

INSULATOR .PREPARING SHACKLE POINT.JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION I TENSION CLAMP, FIX ING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIX ING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALI NG OF RSJ (9/ 11 METER) POLE AND CREDITl NG THE

OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND

45 9926000045 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND

46 9926000046 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

47 9926000047 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

48 9926000048 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

49 9926000049 AND CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG

CONDUCTOR) FOR ONE COND

11/22KV & LT LINES INCLUDING FIXING OF INSULATORS , BINDING PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES ONE COND

INCLUDING , BINDING JUMPERING ETC. PER KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER.

(METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND

53 9926000053 OLD METER SHOULD BE CREDITED TO SDN STORE. (METER WILL No.

BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR

55 9926000055 METER CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN PER CT

STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX.

(METER WILL BE PROVIDED BY DGVCL)

PROVIDING I REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER

CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/ RECONNECTION OF TERMINAL

59 9926000059 CONNECTION WITH PROPER SIZE OF LUGS. (LUGS COST IS

BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PER DTR

PARAMETER OF VOLTAGE , CURRENT & LOAD AS SHOWN IN PER-

FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA

IN FAULT CONDITION IN WHICH READING PARAMETER IS NOT

SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE

62 9926000062 ARMOURED COPPER CABLE (3.5METER) , TERMINATION IN METER No.

& COIL ETC.(METER , METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE COPPER

CABLE) (METER, METER BOX , C.T./P.T. COIL WILL BE PROVIDED BY

Binding of messanger Conductorat with a distance not more than

64 9926000064 0.75 mtr with 6 turns minimum on XLPE Cable with single strand No.

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT

65 9926000086 Terminal protector (UV Resistance) with using 95/ 120/ 150 sq.mm PER SET

long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) after removal of semi PER SET

conductor by HT ABC (6 inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y , B)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In- Cage (Pie) Type , Earth Electrodes for HT

Feeder Pole Having 2000 mm Electrode Length as per the Tender

Specifications and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule , Pipe-In- Cage (Pie) Type , Earth Electrodes for HT

Feeder Pole Having 3000 mm Electrode Length as per the Tender

Specifications And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints or

welding. Both the end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving separate earthing

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately

meter GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge) (All

Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25"

diameter for covering GI strip with UV protected Cable Ties of

70 9926000092 X 7.6 mm size to bind with pole face(Approximately 25 meter uPVC Meter

pipe for GI strip covering per transformer centre -as per

requirement and instruction of Engineer in-charge.

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop

out Fuse and Drop out fuse to Transformer H.T. including Busbar

(12 mm sleev) as per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop

out Fuse and Drop out fuse to Transformer H.T. including

Busbar(15 mm sleev) as per technical specification. (All Materials

will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable)

material with Weather resistant , Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID to

OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot

74 9926000096 (LT Side 1.1 kV) including LT (1.1 kV) insulating taps. All live part No

at LT side shall be covered with fixing of LT insulating taps.

75 Nvlon Net around Transformer Center

75.1 9926000097 Nvlon Net 112 * 15 ft) Per Net

75.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting

75.3 9926000099 nylon net shall be provided Per TC

1. DGVCL will provide key material like M.S. materials .ABC/ Bare conductors ,PSC/ RSJ Poles,lnsulators

,Fabricated materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to

the relevent ISi specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrictated items shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST applicable time to time. 5.All steel material are to be

painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated

materials of RSJ/ PSC poles is must required.

(b) Two coats of approved ISi mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISi mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

ANIXUTURE B LINE MAINTENANCE Sehedule B

Rate for FY 2024-

Item Code Details of works Unit

(A) LINE MAINTENANCE

1 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with

8" binding [D Type] & capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in costle

area with cleaning .

6 9924000008 Pin binding of conductor LT shakel insulator No.

7 9924000009 Replacement of one/ both disc.insulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Refixing of V cross Arm No.

10 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

11 9924000013 Refixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one

colour and have lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (1ph.) meter for Urban area No.

19 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height

40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size height

40mm* width 8mm)

22 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including clamps.nut

Reparing of guarding involving reshaping of bearer wire cross

lacing binding etc.

Painting of steel fabricated material of RSJ DO DP structure with

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

painting of steel fabricated material of PSC Single pole (HT line)

painting of steel fabricated material of PSC DO DP double pole

painting of steel fabricated material of PSC double pole at pole

mounted transformer with paint

31 9924000033 Providing line seperater single phase No.

32 9924000034 Providing line seperater three phase No.

Replacement I Providing of stay insulator along with adjustment of

tension in stay wire

Replacement of deteriorated /providing LT dist. Box with new up

to 1OOKVA capacity & crediting it to store.

Replacement of deteriorated /providing LT dist. Box with new

above 1OOKVA capacity & crediting it to store.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling &

38 9924000040 location

restringing etc.

replacement of 11KV Pin insulator with providing new double pin

replacement of 22KV Pin insulator by new 11kv pin insulator with

spares & providing new double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No.

Replacement of existing 11kv conductor (all size) with new double

43 9924000046 Plumbing of PSC Pole with straightening at pin point No.

44 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/ RSJ/STP) with refilling of

stone Murrum etc.

Providing new 11kv AB /GO switch with fabrication and insulated

colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new

insulated jumper , binding, lugs etc

Providing cage type loop guard in verticle LT line with using PVC

48 9924000052 per pole

reel insulators etc

Labour charges for replacement /providing of MMB & service with

all accessories for three phase connection

Labour charges for replacement /providing of MMB & service with

all accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

51 9924000055 25/63/ 100/200 KVA with all fabrication & creditig the old material No.

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line from pole & crediting to

Dismentaling & removing of service line from pole & crediting to

58 9924000062 Reconnection of service line complete with PVC cable(1 Ph) No.

59 9924000063 Reconnection of service line complete with PVC cable(3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in

length) with salt and coal 10kg each, including pvc rigid pipe 20mm

dia( 1.5mtr length) to pass exposed part of G.I. wire at consumer

end with all materials , earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper

insulated cable with cable nail clip for spiral type earthing at

consumer end. The end of G.I. no 8 is to be connected by

61 9924000070 connector with copper cable of which other end shall be connected per meter

to the earth terminal of meter box. This item shall be used in

location where there is more distance between earth terminal and

earthing terminal of meter. (All materials)

(C) REPLACEMENT OF BARE CONDUCTOR BY HT ILT AERIAL BUNCH CONDUCTOR

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including

fitting of all acessaries i.e. special design suspension I tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge of existing

62 9924000065 bare conductor and crediting in to store & dismentaling of service KM

line from LT bare conductor and to provide service connection on

Aerial Bunch Cable by insulated

pierceing connectors through service connection box complete as

required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

including fitting of all acessaries i.e. special design suspension I

tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of

63 9924000066 existing bare conductor and crediting in to store & dismentaling of KM

service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required

& directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including

fitting of all acessaries i.e. special design suspension I tension

clamp, fixing of cross arm, binding to pin insulator ,preparing

shackle point.jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store complete as

required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including

fitting of all acessaries i.e. special design suspension I tension

clamp, fixing of cross arm, binding to pin insulator ,preparing

shackle point.jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store complete as

required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

including fitting of all acessaries i.e. special design suspension I

tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of

66 9924000069 existing bare conductor and crediting in to store & dismentaling of KM

service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required &

directed by Engineer in Charge.

1.DGVCL will provide key material like M.S. materials.ABC/Bare conductors ,PSC/RSJ Poles,lnsulators ,Fabricated materials etc.

to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the relevent ISi

specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required charge for connection

& electricity bill of the same shall be paid by the agency.

Note: 4.All the rates are inclusive of PF & Exclusive of GST applicable time to time. 5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated materials of RSJ/PSC

poles is must required.

(b) Two coats of approved ISi mark red o xide (primer) is to be properly painted for the RSJ poles & steel fabricated materials of

(c) Two coats of approved ISi mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be properly painted on to

the RSJ poles & steel fabricated materials of RSJ/ PSC poles.

1.DGVCL will provide key material like M.S. materials.ABC/Bare conductors ,PSC/RSJ Poles,lnsulators

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods

confirming to the relevent ISi specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of

required charge for connection & electricity bill of the same shall be paid by the agency.

Note: 4.All the rates are inclusive of PF & Exclusive of GST applicable time to time. 5.All steel material are to be

painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISi mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISi mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to

be properly painted on to the RSJ poles & steel fabricated materials of RSJ/ PSC poles.

TOTAL OF SCHEDULE ANNE-A+B

1.Whatever Steel Material removed after a replacement should be credited to Store.

2.Contractor has to carry out work in sub division under Valsad-city Division.

Executive Engineer (O&M)

Dakshin Gujarat Vij Compay Limited:

Division Office Valsad city