Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 6 SHASTRI MARKET JALANDHAR JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical REJECTED |
Tender Value
₹14.9 L
EMD Value
₹29,800
Closing Date
29 Nov 2021, 5:00 pmClosed
EXECUTTIVE ENGINEER GAS TURBINE DIV PAMPORE
EXECUTTIVE ENGINEER GAS TURBINE DIV PAMPORE
GTD03OF2021-22 DATED 18-11-21 SITC OF DEWATERIONG SUBMEFRSIBLE WATER PUMP
2021_SPDC_148979_1
GTD03OF2021-22 DATED 18-11-21
Open Tender
Electrical and Maintenance Works
Item Rate
7 days
gtd pampore
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
EXECUTTIVE ENGINEER GAS TURBINE DIV PAMPORE
₹29,800
Yes
1 Jan 2022
19 Nov 2021
30 Nov 2021
20 Nov 2021
29 Nov 2021
20 Nov 2021
Amount
Supply, Installation, Testing and Commissioning of 8” sludge disposal / dewatering submergible Pump of 15HP motor, 3-phase , 415V ,1470 rpm,150 m3/h capacity,8” dia pipe ,20mTDH, 11m head , 2 stage implier, pump input 9.96KW including suction /delivery pipes at the tail pool side of Powerhouse.The details and complete description shall be as under. The pumping unit shall be used for pumping out water mixed with slit from reservoir. The pumping unit shall be submersible sliding type with a discharge of 1.5 cusecs per second,20 mtrs head single stage with a speed of 1440 rpm, solid handling size of 100 mm with a delivery of 150mm method of implier.The implier should be of stainless steel construction open van type. Capacity of motor shall be of 15 HP, minimum submersible type,3 phase,415±10%,50 hz ± 5% frequency, efficiency at input shall be 68% ,minimum submersible shall be1100mm.
Providing and fitting of automatic panel board for operating pump and shall be fitted with suitable capacity of starter fully automatic and shall be connected with water resistant operating cable.
P/F of 200 mm dia,5m thick MS pipe ERW confirming to IS -3589. The thickness of pipe shall be 5 mm. The length of each pipe shall be 4-6 mtrs
P/F of 200mm dia MS flanges to 200mm dia MS pipe with thickness of 12mm. The flange should be drilled with 8 no of holes of 19 mm dia.
Fabrication, providing and fitting of 150 mm dia flanged MS bend. The thickness of bend shall be 5 mm, the thickness of flange shall be 12 mm drilled with 8 no of holes 19 mm dia each
Fabrication, providing and fitting of 200 mm dia flanged MS bend. The thickness of bend shall be 12 mm, drilled with 8 no of holes 19 mm dia each.
Fabrication, providing and fitting of 150×200mm dia flanged MS increaser 5 mm thick. The increaser shall be fabricated out of 5mm thick MS plate. The increaser shall be flanged with 200 mm dia flange on one end and 150 mm dia flange on other end. The increaser shall be fitted on the bend of the pump. The length of increaser shall be 450 mm
Providing and fitting of material such as nuts bolts (Assorted size) and rubber washers.
Complete painting of pipe line, flanges ,bends etc. with two no of coats, anticorrosive metal primer and two coat of water proof enamel paint of sky blue shade after scratching of foreign materials from the pipe
S.K Sales Company
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .