NIT NO. 04 ITEM NO. 15

Repair/Renovation of suction and delivery line at MultaniDhanda BPS by carrying following works:- Dismantle the existing damaged M.S pipe line, valves, NRV etc by cutting of nut & bolts with the help of gas cutter and man power as required and old material shifted to the store as per direction of site incharge.

Supply of M.S. black pipe 150mm dia C class heavy duty. Make: Jindal/TATA

Supply of M.S. black pipe 300mm dia 8mm thick. Make: Jindal/TATA

Supply of heavy duty 150 mm dia M.S. bend.

Supply of 150mm dia flange thickness size 12mm as per site requirement.

Supply of 300mm dia flange thickness size 12mm as per site requirement.

Supply of CI Foot Valve 300mm size. Make: Kirloskar/IVC/ DJB approved make.

Supply of CI, double flanged spindle sluice valve PN 1.0 IS 14846 CI body/wedge/bronze ring/SS 410 shaft construction and SS IS 6603 Gr 12,Cr12 of 300mm size. Make:-Kirloskar/IVC/DJB approved.

Supply of CI,double flanged spindle sluice valve PN 1.0 IS 14846 CI body/wedge/bronze ring/SS 410 shaft construction and SS IS 6603 Gr 12,Cr12 of 150mm size. Make:-Kirloskar/IVC/DJB approved.

Supply of CI swing type non return valve as per IS 5312 PN 1.0 CI body ,door/bronze to rubber rings/SS 410 hinge pin of 150 mm size. Make:-Kirloskar/IVC/DJB approved make.

Fabrication & Supply of 300 mm dia blind flange as per site measurement.

Fabrication & Supply of 150 mm dia blind flange as per site measurement.

S/o different size of nut & bolts of good quality.

S/o rubber insertion jointing sheet conforming IS 638/79 with ISI mark 3 mm thick Make:- Jyoti or any other make approved by DJB

S/o pressure gauge of 100 mm dia having required range with accessories such as GI fitting bib cock etc. as required to complete the work. Make:-Feibig/H-Guru/DJB approved.

Excavation the site with the manual labour upto 4 mtr deep approx. between the reservoir and pump house wall.The job i/c breaking the RCC with the help of power hammeralong with removal of malwa from site to suitable place.

Breaking the RCC wall of the pump house with the help of pneumatic hammer, required tools and tackles and men power for dismantle the damage pipeline.

Making the complete line with the above material with the help of cutting, welding and grinding etc. as per site requirement.

Laying the pipeline at site after providing the shut down to fix the pipeline inside the reservoir. Job i/c dewatering the water from the reservoir with the help of submersible pumps. The job i/c filling the chemical in the pump house wall for leak proof functioning.

Refilling the existing earth upto 4 mtr deep approx. between the reservoir and pump house wall with complete civil work

Painting the all valves ,bends, gap piece, motor and pump set etc with two coats of anti corrosive paint after fitting sluice valve and NRV in original position with complete floor civil work of pump house and testing/commissioning on full load i/c cartage etc.

Providing/fixing of dewatering submersible pump set and other E&M items by carrying out the following works : Supply of portable dewatering submersible pump set for dewatering muddy water, containing sand, silt etc. of capacity 5 HP/ 3.7 KW having discharge of 800-600 LPM, at 12-15 meter Head, speed 2900 RPM having delivery size 75mm, semi open impeller CF8M, Motor body SS-304, mechanical seal, Shaft SS 410, with 2 pole squirrel cage motor, ‘F’ Class Insulation with thermister motor protection suitable for 415 volt, 3 phases, 50HZ A.C Supply along with 10 mtrs., waterproof cable. Make-BS/ SU/Mody/ KSB

Supply of control panel with ON-Off arrangement in sheet metal enclosure suitable for 5 HP pump set comprising of Ampere meter, voltmeter, DOL starter, indicating lamps, single phase protection, oveload relay duly fixed along with control wiring etc.

S/O GI Pipes 80 mm dia size medium class with GI Flange Welded in both sides 3 mtr long with MS strips complete with threading work on each sideof pipe each flange should be 8 holes and cut for cables. Make:-Jindal/TATA/DJB approved

Making of pit for installation of submersible p/set with the help of pneumatic hammer i/c civil work as required.

S/o LED street light 60W, pressure die cast aluminum housing with heat resistant, toughened glass and IP66 protection. Make:-CG/Havells/Bajaj

S/o ceiling fan 240 V 1200 mm sweep size. Make:-Crompton/Havells/Orient

S/o 1.5 sq.mm PVC insulated single core unsheathed industrial copper conductor flexible cable FRLS confirming to IS-694:1990 with bright annealed electrolytic bare copper conductor for voltage grade upto 1100 volts(90 mtr roll).Make:-Havells/Finolex

S/o 2.5 sq.mm PVC insulated single core unsheathed industrial copper conductor flexible cable FRLS confirming to IS-694:1990 with bright annealed electrolytic bare copper conductor for voltage grade upto 1100 volts(90 mtr roll).Make:-Havells/Finolex

S/o MCB ‘C’ curve 6-32A,240/415, single pole.Make:-L&T/Havells/Standard

Installation of sub p/set in the pit&all Electrical items i/c panel etc, all piping work, fixing of street light, ceiling fan with accessories executing minor civil works, making electrical connections with cable as required size, taking all safety measures all tool and tackles testing and commissioning of all E&M equipment at No load and full load conditions as per standard with full satisfaction of Engineer-In-Charge.

paramount systems

VS ENGINEERING COMPANY

Raj Engineering Co.

SANJAY SALES CORPORATION

Goodwill Enterprises

INSTANT TRADE CORPORATION