Repair of quarter no. S-3 in Canal Colony Ambala

Amount

Dismantling Tile Masonry & Tile Terracing in cement mortar

Dismantling of RCC Batten from Roof.

Removing door and windows (wooden and steel) together with the dismantling of walls:- Doors

Removing door and windows (wooden and steel) together with the dismantling of walls:- Window

Removing door and windows (wooden and steel) together with the dismantling of walls:- Clerestory Window

Dismantling of brick work in cement.

First class brick work laid in cement sand mortar 1:3 in first storey upto 4 meters above plinth level.(by using old bricks)

Cement conc. 1:1 ½ :3 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal excluding steel reinforcement, but including centering & shuttering, laid in position, complete in all respect.a) (1:1 ½ :3 mix is used, instead 1:2:4 of )

12 mm thick Cement plaster 1:3 on side walls

Providing and laying average 6mm thick pop coating on walls,ceiling,beams and lintels etc. complete in all respects as approved by the Engineer-in-Charge.

Cement conc. 1:3:6 with stone aggregate 20mm nominal size in foundation and plinth

Providing and fixing vitrified tiles of size 600x 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand motor 1.3 and jointed with white cement slurry mixed with pigment to match the shade tiles Note: Tile shall be of premium quality (Ist quality) of reputed manufactures like: NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSON & RAK AND SIMPOLO.

Supply and fixing of M.S. Grills for window.

First class brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

First class brick work laid in cement sand mortar 1:3 in foundation and plinth

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified, section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - (c) door and window frame size 127 mm X 50 mm with 40 mm wide double rebate

Tile terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.

Factory manufactured solid flush door shutters, with block board core as per I.S No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed, conforming to I.S 2202 part-I and part-II fixed in position, including iron hinges screws, chocks/cleats and stop etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) a) commercial Veneering with vertical grains or cross, bands and face veneer on both sides commercial facing with laminated core and lipped edges. (iii) 35 mm thick.

Wire gauze kail wood door and window shutters, without springs, housed in chowkats including chocks, iron hinges, screws, etc., complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same)- (b) 30mm thick.

Kail wood door & window shutter panelled, glazed, or glazed & paneled including iron hinges, screws, chocks/cleats & stop etc. complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same)- c)30mm thick (12 mm thick kail wood panel)

Preparation of plaster surface for oil bond distemper including sand papering the surface, applying one coat of linseed oil, and filing with approved quality filler consisting of white lead, linseed oil, varnished and chalk mitti including finishing the surface to the required finish complete.

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shade on new wood work.

Cost of Aluminum fitting complete for door and window such as tower bolts, handles etc, & screws for these fittings (excluding sliding bolts) for single leaf shutter.

Providing & fixing sliding bolts with nuts & screws etc. complete. (b)Aluminum (ii)size 250 mm x 16 mm.

Dismantling Second class mud roofing with brick tiles, precast C.C tiles or stone slabs.

Providing and fixing Ist quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in Skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tile 300x450 mm Make:- NITCO, Kajaria, Somani, Orient, Bell, Johnson & Rak and Simpolo

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- (i) Vitreous chinaware symphonic suite with 15 litres capacity matching chinaware cistern and all internal brass fitting complete with ‘P’ or ‘S’ trap with or without vent (as approved by the Engineer-in-charge) (ii) Once piece seat and lid in hollow black or white plastic fitted with chromium plated hings and rubber buffers, (to the approval of the Engineer-in-charge) Complete in all respects including cutting and making good the walls and floors. (a)Single trap syphonic W.C. Suite (i) White Make:- Hindustan, Cera, Hindware, Kajaria, Johnson & Johnson

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STELL SINKS WITH COMPLETE FITTINGS. (a) size 600mm X 450mm X 200mm

Providing and fixing HDPE WATER STORAGE TANKS of sintex,Diplast O.K Supreme make with covers/lid marked with IS 12701 on roof top of building including cost of hoisting and placing in position making connections with inlet and outlet pipes ,providing overflow and scour provision with suitable plug on scour pipe including cost of nipple, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. (500 ltr capacity)

Cement concrete 1:4:8 with brick ballast 40 mm nominal size in foundation and plinth

Cement concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth

Damp proof course 40mm thick of cement concrete 1:2:4 using stone aggregate with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

Earth work excavation in ordinary soil including dressing with any lead including breaking of clods

Steel reinforcement TMT Bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc and placing in position complete in all respects for all heights/depths/storeys/basements etc.

Supply and errection of PVC Conduit Pipe ISI marked (medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work.

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS Boxes covered with 5mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc Fan point Medium

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS Boxes covered with 5mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc(ii)Light point Short

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS Boxes covered with 5mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc(ii)Light point Medium

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS Boxes covered with 5mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc(ii)Light point Long

3 pin 5 amp plug point including earthing the 3rd pin etc.Short

3 pin 5 amp plug point including earthing the 3rd pin etc.Medium

3 pin 15 amp plug point with 4Sqmm PVC Insulated copper conductor cable including earthing the 3rd pin etc. Short

3 pin 15 amp plug point with 4Sqmm PVC Insulated copper conductor cable including earthing the 3rd pin etc. Medium

3 pin 15 amp plug point with 4Sqmm PVC Insulated copper conductor cable including earthing the 3rd pin etc. Long

Supplying & laying of electrical item i. Wire 1.5 mm

Supplying & laying of electrical item ii. MCB box 32 amp

Supplying & laying of electrical item iii. Holder

Supplying & laying of electrical item iv. Dabbi

Supplying & laying of sanitary Item CPVC Elbow ¾”

CPVC Tee ¾’’

Dhaga

CPVC Pipe ¾” SUPREME

CPVC Brass elbow ¾” x ¾”

CPVC FTA. ¾” x ¾”

Solvent Solution C PVC 100Ml

Brass elbow ½” x3/4”

safeda 100gm

MTA.” ¾’x½’’ Brass CPVC

Hooks

C.I. JOINT 3”

PVC PIPE 2”

CPVC elbow 2”

CPVC socket 2”

PVC PIPE 3”

Pvc pipe 4” (6 KG Supreme)

100 gm. solvent solution pvc.

PVC elbow 3”

PVC elbow 4”

BALL cock valve

Providing and Fixing In Position best Indian make flexible tube Connection. (b) CP brass(iii) 15mmx450mm

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as directed required by the engineer-in-charge).Bib cock long body

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as directed required by the engineer-in-charge).Bib cock

Credit of brick bats

Credit of old iron girder

Credit of old door & window

Credit of Tile

V K Constructions

Chirag Dange, Contractor

THE NEW TAJEWALA CO-OP L/C SOCIETY LTD