Constg. Anganwadi at Village (1) Lilva Thakor Talav Falia, Ta.Jhalod, (2) Nan Salai Tad Falia, Ta.Jhalod & (3) Chanasar Dungra-1 Falia. Taluka.Govind Guru Limdi (Jhalod) under 2236 New Gujarat Pattern (TASP) Yojana 2025-26. Package No.14. Dist.Dahod (Total 3 Anganwadi) (Reinvited 2nd Attempt)

No. figures Amount

Civil Work

1 1) Excavation for foundation up to 1.50 mt. depth including 120.00 Cu.m. 160.89

sorting out and stacking of usefull materials and disposing of the

excavated stuff up to 50 meter lead ( B ) Dence and hard soil

2 2) Providing and laying cement concrete 1:4:8 (1 - cement :4 32.04 Cu.m. 2793.33

Coarse sand :8 crushed stone aggregates 40 mm nominal size )

and curing complete excluding cost of formwork in ( A )

Foundation and Plinth

3 3) Brick work using common burnt clay building bricks having 79.80 Cu.m. 3853.23

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional

4 4) Providing and laying cement concrete 1:3:6 (1- Cement : 3- 6.00 Cu.m. 3992.44

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps

5a 5A) Brick work using common burnt clay building bricks having 49.35 Cu.m. 4141.66

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional

5b 5B) Providing and laying cement concrete work 1:2:4 ( 1 cement 11.10 Cu.m. 12335.51

: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size )

including the cost of form work with curing etc. complete.

(A) Columns

6A 6A) Providing and laying ordinary cement concrete 1:2:4 (1- 2.70 Cu.m. 10219.39

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

6B 6B) Providing and laying cement concrete 1:2:4 (1- Cement : 2- 0.12 Cu.m. 6541.75

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

for reinforced concrete Chhajjas not exceeding 10cm. thickness

upto floor two level including finishing the exposed surfaces with

cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth and

even surface centering and formwork and curing complete

excluding cost of reinforcement.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

7 7) Half brick masonry in common brunt clay building bricks 27.00 Sq.mt. 707.89

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Mild

steel round bars after every three course embedded in Cement

Mortar in (B) Conventional.

8 8) Providing and laying ordinary cement concrete 1:2:4 (1- 2.40 Cu.m. 8593.80

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in (A) Beam (i) having cross

sectional area more than 0.05 Sqm. and upto 0.08 Sqm.

9 9) Providing and laying ordinary cement concrete 1:2:4 (1- 2.40 Cu.m. 7665.60

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in A) Beam (ii) having cross

sectional area more than 0.08 Sqm. and upto 0.12 Sqm.

10 10) Providing and Laying ordinary cement concrete 1:2:4 (1- 20.10 Cu.m. 7475.61

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C. Work in (ii) SLAB having more than

cm. and upto 10 cm. thickness.

11 11) Providing ISI Mark TMT Bar 415 Fe reinforcement for R.C.C. 4020.00 Kg. 68.33

work including bending, binding and placing in position complete

upto floor two level.

12 12) Providing 15 mm thick plaster in single coat on fair side 69.00 Sq.mt. 253.61

Brick concrete walls for interior plastering upto floor two level and

finished smooth in cement morter 1: 4 (1 cement : 4 sand) incl.

finishing with floating coat of neat cement slurry.

13 13) Providing 10mm thick cement plaster in single coat on 282.00 Sq.mt. 187.37

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand) incl. finishing with floating coat of neat cement slurry.

14 14) 20mm thick sand faced cement plaster on walls upto height 375.00 Sq.mt. 353.98

10 metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

15 15) Filling in plinth with sand under floors including watering, 63.00 Cu.m. 419.82

ramming and consolidating and dressing etc. completed.

16A 16A) P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 135.00 Sq.mt. 1434.75

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

16B 16B) Providing and laying machine cut free edges machine 16.50 Sq.mt. 1063.76

polished Kota stone for shelves in cupboard and walls in single

piece (Miximum 150) 25 mm including cutting grooves in walls

and fixing the stone with neat cement slurry in true line and level

as direct.

17 17) Providing and laying polished Kota stone slab 25mm thick in 13.50 Sq.mt. 1205.60

risers of steps, Dedo and pillers laid on 10mm thick cement

mortar 1:3 (1 Cement :3 coarse sand ) and jointed with gray

cement slury including rubbing polishing etc. complete .

18 18) Providing and laying white glaze tiles 6mm thick in flooring 4.20 Sq.mt. 911.46

treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.(A) White galzed tiles

19 19) Providing and laying white glaze tiles 6mm thick in skrting 33.00 Sq.mt. 1017.48

resers of steps and dedo on 10 mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) and jointed with white cement slurry. ()

White Glazed Tiles)

20 20) Providing 10mm thick cement plaster in single coat on 123.00 Sq.mt. 173.08

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) plastering on ceilings and sofits of stairs upto floor two

level instead of plasterning on walls for every additional storey.

21 21) Constructing a cooking platform 60 cm. width and 70 cm high 4.50 Rmt. 2695.45

resting on B.B. Masonary walls 23 cm thick in C.M.(1:6) with (ii)

fixing black kadappa stone 30 mm. thick laid on precast RCC

(1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4)

etc. complete.

22 22)Applying two coats of putty & two coats of primer of approved 729.00 Sq.mt. 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

23 23)Distempering with dry distemper of approved brand and 729.00 Sq.mt. 50.62

manufacture (two coats) and of required shade on wall surfaces

of given an even shade, over and including a priming coat coat of

whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter.

24 24) Finishing wall with water proofing cement paint of on wall 375.00 Sq.mt. 62.43

surfaces (Two cats) to give an appro brand and manufacture and

of required shape even shade after thoroughly brushing the

surface remove all dirt and remains of loose powered materials.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

25 25) Providing and fixing water closet squatting Pan (Indian type 3.00 Each 1139.33

W.C. Pan) size 580mm with providing and fixing in cement

mortar 1:3 (1 cement : 3 coarse sand) a pair of white vitreouse

china 250mm x 130 mm x 30mm footrest to long pattern squtting

pan water closet (A) vitreous china (I) long pattern = white color

26 26) Providing and laying (two level or slopes ) and jointing with 30.00 Rmt. 225.47

stiff mixture of cement mortar in proportion 1:1, Salt glazed

stoneware pipes including testing of pipes and joints complete.

(A) 100 mm dia.

27 27) Providing sock pit of 5.00 Cu.m. Volume including excavating 3.00 Each 3285.35

and filling brickbats with dry masonary work at top for 45 cm.

height including covering the top with stone including providing

vatas in C.M. 1:3 with finishing, curing etc. complete as directed.

28 28) Providing and fixing to wall ceiling and floor 10.00 Kg./Cm.2 6.00 Meter 280.23

working pressure polythene pipes of the following outside dia.

low density, complete with special flange compression type

fittings, wall clips etc. including making good the wall ceiling and

floor. (F) 75 mm.

29 29) Providing and fixing in position PVC covel vent to pipes (i) 75 3.00 Each 393.04

30 30) Constructing septic tank of 2.00 mt. x 1.50 mt. x 1.20 mt. size 3.00 Each 14298.57

with necessary out side wall and two partition walls of brick

masonary making two parts of the tank, plastering tha walls in

cement mortar 1:4 making all connection of pipe line and

covering of the top with R.C.C. slab of cement concrete 1:2:4

with necessary reinforcement etc. complete and providing

necessary earth work on it as directed.

31 31) Providing and fixing to wall ceiling and floor galvanized mild 36.00 Meter 252.49

steel tubes ( Medium Grade ) of the following nominal bore, tube

fitting and clamps including making good the wall ceiling and

( A ) 15 mm. dia.

32 32) Providing and fixing to wall ceiling and floor galvanized mild 36.00 Meter 401.95

steel tubes ( Medium Grade ) of the following nominal bore, tube

fitting and clamps including making good the wall ceiling and

( C ) 25 mm. dia.

33 33) Providing and fixing gun metal check or non return full way 3.00 Each 186.83

wheel valve. (i) 15 mm. dia.

34 34) Providing and fixing gun metal check or non return full way 3.00 Each 420.63

wheel valve. (C) 25 mm. dia.

35 35) Providing and fixing screw down bib taps of following size.(i) 3.00 Each 186.83

15 mm. dia.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

36 36) Providing and fixing pillar taps capstan head screw down 9.00 Each 308.73

high pressurewith screws,shanks and back nuts.(i) 15 mm. dia.

37 37) Providing and fixing brass screw down stop tap.(A) 15 mm. 6.00 Each 205.83

38 38) Providing and fixing chromium plated half turn flush cock of 3.00 Each 263.77

approved quality including fixing in pipe line etc.complete. (ii)

39 39) Providing and fixing cast iron (Spun) Nahni trap of the 9.00 Each 661.79

following nominal diameter of self cleaning design with C.I.

Screaed down or hinged grating including cost of cutting and

making good the walls and floor 100 mm. inlet and 50 mm.

40 40) Providing and fixing to wall ceiling and floor 10.00 Kg./Cm.2 30.00 Rmt. 339.05

working pressure poluthene pipes of the following outside dia.

Low density, complete with special flange compression type

fittings, wall clips etc. including making good the wall ceiling and

41 41) Providing and fixing S.W. gully trap with C.I. grating brick 9.00 Each 1292.19

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight. (A) 100mm

x 100mm size P type.

42 42) Constructing brick masonary chamber for underground C.I 3.00 Each 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35 Kg. / Cm.2 in C.M. 1:5 C.I. cover with

frame (Light duty ) 455mmx610mm internal dimensions total

weight of cover with frame to be not less than 21 Kg.(Wt. of

cover 16 Kg. ) and Wt, of frame 5 Kg. ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.

43 43)Providing erecting and fixing double coated Syntex PVC. 3000.00 Liter 3.95

(ISI) water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

44 44) Providing and fixing steel door with shutter with frame 50 x 17.25 Sq.mt. 2770.39

50 x 6 mm. iron angle and BG 18 mm. steel plates with hinges,

handle, stopper, locking arrangement etc. steel work welded in

built section cutting hosting, finishing in position two coats of oil

paint and one coats of primer coat etc. comp.

45 45) Providing and fixing steel window with shutter with frame size 22.50 Sq.mt. 4253.20

50 x 50 x 6 mm. iron angle and BG 18 mm. steel plates with

mm dia round bars, hinges, handle, stopper, locking

arrangement etc. complete steel work welded in built section

cutting hosting, finishing in position two coats of oil paint of

approved quality over one coats of primer coat etc. comp.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

46 46) Providing and fixing wash basin with single hole for pillar tap 3.00 Each 1632.71

with C.I. or M.S. brackets painted white including sutting holes

and making good the same including fixing C.P brass waste and

M.I fisher union for washbasin or sink. ( A ) 32 mm. dia. ( A )

Vitreous China , (ii) Flat Back washbasin 550 mm. x 400 mm.

size. ( i ) In white colour,

47 47) Providing and fixing Kitchen sink with C.I. or M.S. Brackets 3.00 Each 2222.00

painted white including cutting holes in walls and making good

the same but excluding fitttings ( I ) 600mm x 450 mm x 150mm

size (Steel)

48 (48) Providing and fixing 20cm. x 15cm x 2.5 cm. thick year plate 3.00 Each 306.14

of marble stone set in C.M. 1:4 including finishing and engraving

letters etc. complete.

49 49) Providing and Laying Broken china mosaic flooring for 130.50 Sq.mt. 779.70

terrace using 12mm to 20mm broken pieces of glazed tiles to be

laid over cement mortar creme out upto surface using white

cement including rounding off junctions and extending them upto

15cm along the wall clearing with water and oxalic acid etc as

50 50) Provding and fixing pre-cast rubber dye inter locking concrete 269.00 Sq.mt. 702.02

block 60mm thick with grad concrete M200 pnumatic

compressed by mechanically pressed and as per approved

design including 75mm sand layer for leveling and filling the joint

with sand in proper line and level etc.Completed

51 51)Writing letter or figures on any surface with black Japan paint 15600.00 Per 3.61

(stops, comas, hyphens and the like not to be measured and Letter

paid for separately) (ii) Indian (Letters/Figures) Per

52 52) Dismentalling the old detoriated Anganwadi building using 1.00 Each 54643.02

JCB machine from top to bottom with foundation and clearing the

site by disposing of the unserviceable materials from the site of

work to borrow area as directed by Engineer in charge and

depositing the serviceable materials like old steel bars, old

wooden / steel doors & windows & rubble using tractor with trolly

at the place as and where agency desire etc. complete.

53 53)Providing Supplying and fixing TV of Approved Brand size of 3.00 Kg. 40400.00

42" completed

54 Drilling of 215 mm dia. Bore in over burden strata (0-30) 270.00 Rmt. 343.00

including lowering and fixing of 175 mm nominal dia UPVC

pipe/175 mm dia ERW pipe upto required depth and further

drilling of 165mm dia bore hole in rocky strata by DTH rig.

55 Manufacture, supply and delivery of ISI marked (IS-12818) with 18.00 Rmt. 990.02

latest amendment.

c) UPVC casing pipe 175 mm nominal dia. "CS" type

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

56 Lowering of Single phase submersible pump set complete with 3.00 Job 2842.00

required length of HDPE pipe, cable in borewell and fitting of

control panel board including wiring work and satisfactory testing

as per instruction of Engineer in charge at different villages

including carting/ loading/ unloading of material to site for bore

deptrh upto 90 mts....

1) 40mm dia MS Pipe Clamp with fitting accessorries

2) 175mm x 40mm Bore cap in two Halves with 40mm Hole

3) Submerssible coupler for jointing of sub pump & HDPE Pipe

4) Teflon tape

Bore Plug of 100 mm Height made from 5 mm thick M.S. plate

(For top also) with 3 holes at equal distance on circumference for

nut – bolts type, locking arrangement with nuts – bolts & lock

nuts of std. make complete.

57 Providing & Supplying Single phase Borewell sub pump motor 3.00 Set 11718.00

set with control panel Cat Q : 1.3, 20 LPM/110 mtr Head 1.5 HP

MOC: Casing: CI-FG260, Impeller : Bronze & Shaft : SS:410

58 PVC insulated flat submersible cable as per detailed technical 360.00 Rmt 57.13

specifications of R/C of GWSSB conforming to IS 694, IEC

59 Manufacture, Supply and delivery of following ISI marked 300.00 Rmt 55.00

H.D.P.E. Pipes (IS:4984/1985 with latest amendment) having

material Grade PE-80 in approximate 100 mtr. Coil length or as

per GWSSB requirement with SS-316 Nipple at both end having

11 TPI threading as per specification, press fitted and bolted

having nominal diameter as under as per detailed Technical

Specification.

60 Taking color Photoghraphs at site of work ( 3 copy of 9.00 Set 150.00

photoghraphs in One set) etc comp.

Electrification Work

61 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 21.00 Pt. 499.95

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Ca-III [1-2-1]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

62 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 9.00 Pt. 701.95

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Ca-

63 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm 6.00 Pt. 528.23

(Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories. [I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Ca-

64 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 6.00 Pt. 780.73

from mcb db board. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Ca-III [1-

65 Point wiring for on board Looped Plug with 6A Modular type 12.00 Pt. 268.66

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling

with following type accessories. Ca-III [1-2-4]

66 Providing and erecting Mains with 1.1 KV grade FRLS PVC 75.00 Mtr. 90.90

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

67 Supplying and erecting LED indoor fittings with LEDs of wattage 9.00 No. 484.80

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

Tube Light with integral driver. (iv) 22 Watts, Surge - 2KV,IP-20,

conventional 4 feet. Ca-III [2-16-2]

68 Supplying and erecting led lamps with following wattage capacity 9.00 No. 146.45

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V

in built, surge,protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP holder. (ii)

8 watts [2-16-3]

69 Providing and erecting Miniature circuit breaker single pole 6A to 9.00 No. 131.30

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Ca-III [3-10-1(B)]

70 Providing & erecting 240 V MCB double pole switch for lighting 3.00 No. 348.45

Load (B Curve) having 10 KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity (B) 40 Amp. Ca-

71 (A) single phase incoming and horizontal single phase outgoing. 3.00 No. 1759.42

(b) sheet steel double door (IP-43) (iv)12 way [3-11-5 A b]

72 Providing and erecting Approved make RCCBs conforming to IS: 3.00 No. 2636.10

12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (iI) 40 Amps. DP Cat-III [3-12-1]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

73 Supplying & erecting earth pit of minimum bore dia.150mm size 3.00 No. 5416.63

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil Length of

pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg. [3-14-9]

74 Providing and erecting Approved make Ceiling fan with double 9.00 No. 1717.00

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm. sweep complete, canopy erected on existing hook or clamp

with earthing. [Make shall be approved by Engineer in charge] [5-

75 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 9.00 Mtr. 126.25

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing. [5-2-1]

76 Supplying & erecting fan hook box of 10 mm M.S. round bar 9.00 No. 126.25

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

Total Amount (Civil + Electrification Work) TOTAL Rs.

Total Amount (Civil + Electrification Work) TOTAL Rs.

i.e. Rupees Thirty Lakh(s) Sixteen Thousand Seven Hundred Seventy Five And Paise Eighteen Only

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 20000.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Deputy Executive Engineer

Panchayat (R & B) Sub Division Godhra Electrical Sub Division

JHALOD R&B Deptt. Godhra

Divisional Account Officer

Panchayat (R & B) Division Executive Engineer Executive Engineer

DAHOD Godhra Electrical Division Panchayat (R & B) Division