PERIODICAL SERVICES TO CERTAIN BUILDINGS IN OTM ACCNS IN POCKET 5 AND 6 AND SMART PERIODICAL AND CERTAIN MINOR REPAIRS IN PAO (ORs) BLDG AGE B/R-II UNDER GE ROORKEE

Amount

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering on wall/concrete surface with cement mortar (1:4) finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surface of wall and applyying three coat of white wash complete all as specified and directed.

-ditto- but ceiling new surfaces

M&L for Preparing newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L applying two coats of distemper oil emulsion on new surfaces by using rollers over a coat of primerof same make suitable for distemper oil emulsion including 2 mm thick white cement base wall care putty complete all as specified and directed.

M&L for preparation of old surface plastered or unplastered and applying one coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old surface plastered or unplastered and applying two coat of white wash on walls complete all as specified and as directed.

M&L for preparation of old surface plastered or unplastered and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and directed.

M&L for preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion using rollers of any colour complete all as specified and as directed.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of colour wash complete all as specified and as directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint on surfaces of walls/ceiling complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces by removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces by removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers of any description, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for writing letters or figures (Block, Roman, italic or Indian) by painting with one coat of black synthetic enamel paint in 30 cm dia on plastered surfaces on walls and numbered with one coat of synthetic enamel paint height n. exc 15 cm and width 2 cm complete all as sepcified and directed.

M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (RPM 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and directed

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja, of approved make all as specified and prescribed by manufacture of paint complete all as specified and directed. (a) The old surface shall be prepared by removing all foreign material by mechanical sander (RPM 1500-2700) along with internal dust extraction system for clean environment as approved by paint manufacturer. (b) Applying a coat of anti fungal growth solution as approved. (c) Wall care putty of required thickness shall be applied to make the surface true level by removing all dents etc as diredcted. (d) The work must got executed through authorised applicator of reputed paint manufacturer by concluding MOU with manufacturer and guaranteed for a minimum period of 3 Years by the manufacturer as approved by GE. (e) All the stages shall be got approved by GE before proceeding to next stage. (f) The make, brand, colour and shade shall be got approved by GE. (g) The application of acrylic paint shall be with fully automatic airless spray machine with a flow speed of min 1 litre per menuite having pressure of 3300 PSI by allowing 6-8 hours to dry the surface before painting of subsequent coat.

M&L for applying One coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja, of approved make all as specified and prescribed by manufacture of paint complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L for Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 6 mm thickness (as per IS:14862) of size 595x595mm and approved design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick MS powder coated/GI sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick MS powder coated/GI sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

All as per item no. 28 but except brick

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.

Fixing only any thick sheet glassinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beds size 2 mm to 3 mm size complete all as specified and directed.

Demolition of concrete of any description in any position complete all as specified and directed.

M&L coloured non skid tile7 to 8mm thick (square/rectangular) area of each tiles exc 0.18 sqm n exc. 0.36 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.18 sqm n exc 0.36 sqm in vertical surface/ suck as skirting and dado etc set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm (1:6) complete all as specified and directed.

S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening.

S&F 5 mm thick solid PVC sheet wall lining any pattern, colour, plain, wood grained consisting of inclusive of solvent cement and fixing at site on complete all as specified and directed including dismantling of existing pannelling complete.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Note - The cost of scaffolding wherever required are deemed to be including in the rates quoted by the contractor and the hight of the bldgs shall be up to 15 M.

shreyansh construction (BID ID -3060807)

NEW HINDUSTAN CONSTRUCTION COMPANY (BID ID -3060552)

Jain Engineering Works (BID ID -3065230)

Panwar Construction Co. (BID ID -3060073)

VINAYAK CONSTRUCTION COMPANY (BID ID -3054331)

M/S RAJESH ARORA (BID ID -3068594)

Alankar Traders (BID ID -3058581)

yash construction company (BID ID -3058935)