Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | Biju S Pillai L1 |
|---|---|---|---|---|
| 1.00Building Maintenance | ||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 500.05 | kg | 181.43 ₹90,724.07 Lowest |
| 1.00 | 13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 55.38 | sqm | 25.38 ₹1,405.54 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 99.91 | sqm | 159.8 ₹15,964.82 Lowest |
| 1.00 | OD243518/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side of the
sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum
to avoid scratches during transportation and should be supplied in single length upto 12 metre or
as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size
(5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding
the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | 225.75 | per sqm | 604.12 ₹1,36,380.09 Lowest |
| 1.00 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 1.85 | sqm | 562.36 ₹1,040.37 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,328
Closing Date
9 Mar 2026, 6:00 pmClosed
Rajeena B
Office of the Assistant Engineer , Chengannur MunicipalitY
Annual Plan-CHENGANNUR MUNICIPALITY 2025-26 -PROJ No. 299/26 NAGARASABHA PRIVATE BUS STANDINU MUNNIL SHEET STHAPIKKAL-General Civil Work (Retender)
2026_LSGD_832625_10
02/2025/AE/CGNRMLTY/2025-26
Open Tender
Civil Works - Roads
Item Rate
180 days
Chengannur Municipality
Please refer Tender documents.
7 documents required · 7 mandatory
₹560
Yes
₹6,328
Yes
14 Oct 2026
2 Mar 2026
11 Mar 2026
2 Mar 2026
9 Mar 2026
2 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building Maintenance | |||||
| 1.001 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 500.05 | kg | - | - |
| 1.002 | 13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 55.38 | sqm | - | - |
| 1.003 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 99.91 | sqm | - | - |
| 1.004 | OD243518/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side of the
sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum
to avoid scratches during transportation and should be supplied in single length upto 12 metre or
as desired
by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size
(5.5x55mm)
with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding
the cost of
purlins, rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | 225.75 | per sqm | - | - |
| 1.005 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 1.85 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1420996.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
Tendernotice_2.pdf
PDF • 0.13 MB
Tendernotice_3.pdf
PDF • 0.12 MB
BOQ_1420996.xls
BOQ • 0.25 MB
sbd.pdf
Tender Documents • 0.96 MB
nitputhiyath.pdf
Tender Documents • 0.27 MB
epayment.pdf
Tender Documents • 0.24 MB
ipact.pdf
Tender Documents • 0.24 MB
priliminary.pdf
Tender Documents • 0.26 MB
affidvit.pdf
Tender Documents • 0.24 MB
fot.pdf
Tender Documents • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .