Project No.--1700/26-Interlocking works to Sajith road - Appended road at Div.6 in Puzhathi Zonal

Detailed Estimate

3.5.2:Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

3.15.2:Compacting Original Ground (ii) Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.

4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead

OD308396/2025-2026:( MOD 6.7.1) Interlocking Concrete Block Pavement providing and laying of Interlocking Concrete Block pavements having thickness 80 mm as per drawing and technical specification clause 1504 , bedding with 6 mm aggregate and filling joints with sand. Sand as per Table 1500.5 Bed = 60.00 x 3.75 x0.05 = 11.25 cum. Joints = 60 X 0.08 X 0.1 = 0.48 cum

75.8.1.1:Providing plain/reinforced concrete(1 cement:2 fine aggregate: 4 course aggregate) forsubstructure as per drawings and technical specifications Clause 802, 803, 1202 & 1203as required including compaction, finishing and tamping etc .complete. Max. size ofcourse aggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD308395/2025-2026:supplying and fitting name board of size 75 x 45cm made with gi plain sheet 1.25 mm thick( class III) fitted with 35 x35 x5 mm MS angle 2 nos horizontally and 3 nos vertically to make a frame for strengthening the gi sheet fitted 2 nos 40mm gi pipe vertically 1.5m above from ground level and fixing in cement concrete 1:2:4 . 40x40x40cm including cost and conveyance of all materials and labour charges , fabricating etc complete

OD308394/2025-2026:lettering with black japan paint of approved brand and manufacture